Self adhesive Vent Patch
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3919102055 | 40.8% | CN | US | 官方文档 |
| 3919905060 | 40.8% | CN | US | 官方文档 |
商品图片
AI分析
🩹 Self-Adhesive Vent Patch (Plastic-Based Medical/Orthotic Adhesive)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy for Adhesive Plastics
📌 I. Product Definition & Classification: What Exactly Is a "Self-Adhesive Vent Patch"?
A Self-Adhesive Vent Patch typically refers to a flat, plastic-based product designed to allow airflow (ventilation) while providing adhesion to skin or surfaces. In international trade, these are often used in: 1. Medical/Orthopedic Applications: Breathable tapes for wound care or orthotic support. 2. Industrial/Protective: Adhesive strips with micro-perforations for ventilation in packaging or electronics cooling.
Crucially, the HS Code classification depends on the physical form (rolls vs. sheets) and width, not just the function. Based on the provided data, these products fall under Chapter 39 (Plastics and Articles Thereof), specifically heading 3919 (Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics).
⚠️ Key Classification Logic:
- If the product is cut to a specific width ≤ 20 cm and supplied in rolls → It falls under 3919.10.
- If the product is not in rolls of ≤ 20 cm (e.g., large sheets, or rolls wider than 20 cm) → It falls under 3919.90.
- Note: The "vent" feature (perforations) does not change the base classification unless it significantly alters the fundamental character to a different article (e.g., a specific medical device under Chapter 90), but for general adhesive plastic strips, Chapter 39 is standard.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority)
Based on the provided <DATA>, here are the precise HS Codes and their descriptions:
| HS Code | Product Description | Application Scenario | Key Feature |
|---|---|---|---|
3919.10.20.55 |
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics: In rolls of a width not exceeding 20 cm: Other Other: Other | Adhesive strips/tapes for medical, industrial, or craft use where width is ≤ 20 cm (e.g., standard medical tape rolls, narrow venting strips). | Rolls ≤ 20 cm width |
3919.90.50.60 |
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics: Other: Other Other | Adhesive plastic products not in rolls ≤ 20 cm (e.g., larger sheets, wider rolls, or non-roll formats like cut patches). | Not rolls ≤ 20 cm |
🔍 Critical Distinction:
-3919.10.20.55is for narrow rolls (≤ 20 cm). This is the most common classification for medical vent tapes or narrow adhesive strips.
-3919.90.50.60is the residual category for other self-adhesive plastic products that do not fit the specific "rolls ≤ 20 cm" criteria. This includes larger sheets or wider rolls.
💰 III. 2026 Latest Tariff Rate Details (Detailed Breakdown)
✅ Applicable Country: United States (US)
✅ Origin: China (CN) (Assumed based on typical tariff structures for these codes)
✅ Effective Date: Current 2026 Status
✅ Total Tax Rate: 0.0%
🎯 1. HS Code 3919.10.20.55 — Self-Adhesive Plastic Strips/Tape (≤ 20 cm Rolls)
| Item | Content |
|---|---|
| Base Tariff | 0.0% (ad valorem) |
| Section 301/USITC Additional Tariff | 0.0% |
| IEEPA Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value × 0% = $0 |
| De Minimis Eligibility | ✅ Yes (if value < $800) |
| Legal Basis Path | HTSUS:3919.10.20.55 → USITC:0.0% |
📌 Explanation:
- This code enjoys a 0% total tariff rate for Chinese-origin goods.
- Unlike some high-tech or strategic goods, plastic adhesive strips (non-medical device classification) are not subject to the heavy Section 301 or IEEPA surcharges in this specific subheading.
- Cost Advantage: This is a low-tariff item, making it highly competitive for US importers.
🎯 2. HS Code 3919.90.50.60 — Other Self-Adhesive Plastic Products
| Item | Content |
|---|---|
| Base Tariff | 0.0% (ad valorem) |
| Section 301/USITC Additional Tariff | 0.0% |
| IEEPA Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value × 0% = $0 |
| De Minimis Eligibility | ✅ Yes (if value < $800) |
| Legal Basis Path | HTSUS:3919.90.50.60 → USITC:0.0% |
📌 Explanation:
- Similar to the above, this residual category also has a 0% total tariff rate.
- Note: While the tax is 0%, ensure that the product does not contain regulated medical components that might shift it to Chapter 90 (Medical Devices), which could have different tariff and FDA implications.
🛠️ IV. Customs Clearance Practical Advice (Avoid Pitfalls)
✅ 1. Required Documentation Checklist
| Document | Required? | Notes |
|---|---|---|
| ✅ Commercial Invoice | Yes | Clearly describe product as "Plastic Self-Adhesive Vent Patch" or "Adhesive Plastic Tape, Perforated". Avoid vague terms like "Medical Tape" if not FDA-regulated. |
| ✅ Packing List | Yes | Specify dimensions, width, and form (roll/sheet). |
| ✅ Product Photos | Yes | Show the adhesive side and the vent/perforated structure. |
| ✅ Material Declaration | Yes | Confirm it is Plastic (e.g., PVC, Polyurethane, Acrylic). If it contains fabric or rubber, classification may change to Chapter 59 or 40. |
| ✅ FDA Status (if Medical) | Conditional | If marketed as a medical device, FDA registration may be required. If it’s a general adhesive patch, no FDA approval needed. |
✅ 2. Declaration Tips (Key Mantras)
🔥 "Roll Width Defines Code, Plastic Content Defines Chapter, Venting is Just a Feature!"
| Scenario | Correct Declaration | Wrong Approach |
|---|---|---|
| Product is a roll, width 10 cm | 3919.10.20.55 |
Misdeclare as 3919.90... → Potential audit risk |
| Product is a sheet, size A4 | 3919.90.50.60 |
Misdeclare as 3919.10... → Incorrect form description |
| Product contains Cotton Fabric | Not Chapter 39! → Likely 5906.xxxx or 5001.xxxx |
Claiming it’s plastic when it’s fabric → Fraud risk |
| Product is a Pre-cut Shape | 3919.90.50.60 (if not in rolls) |
Claiming it’s a roll if it’s loose sheets |
✅ 3. Special Considerations
| Situation | Handling Advice |
|---|---|
| Medical Device Classification | If the patch is intended for wound closure and claims therapeutic benefits, it may be a Class I/II Medical Device under FDA. Ensure EIN (Establishment Identifier) and Device Listing are complete. |
| Perforations/Vents | Perforations do not change the HS code if the base material remains plastic. Do not try to classify as "Textile" unless the backing is fabric. |
| Adhesive Type | Ensure the adhesive is not classified as a chemical product (Chapter 35) but as part of the plastic article (Chapter 39). |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Notes |
|---|---|---|---|
| 🇺🇸 United States | 3919.10.20.55 / 3919.90.50.60 |
0.0% | No Section 301/IEEPA surcharges for these specific subheadings. |
| 🇨🇳 China | 3919.10.20.55 / 3919.90.50.60 |
Varies (Import Duty) | Check local CBTA rates for exports to China. |
| 🇪🇺 European Union | 3919.10 / 3919.90 |
0% - 4.5% | Varies by member state and specific plastic type. |
| 🇬🇧 United Kingdom | 3919.10 / 3919.90 |
0% - 4.5% | Post-Brexit tariff schedules apply. |
📌 Conclusion:
- The US market offers a 0% tariff advantage for these specific plastic adhesive products.
- Ensure accurate description of width and form to qualify for the correct 0% rate.
📌 VI. Common Errors & Pitfalls (Lessons Learned)
❌ Error 1: Classifying a fabric-backed vent patch as plastic (3919.xxxx).
👉 Consequence: Misclassification → Potential penalties, reclassification to Chapter 59 or 63.
✅ Fix: Confirm backing material. If >50% fabric, look at Chapter 59/63.
❌ Error 2: Describing the product as "Medical Device" when it is a general adhesive.
👉 Consequence: Unnecessary FDA regulatory burden, clearance delays.
✅ Fix: Use neutral terms like "Adhesive Plastic Tape" unless FDA-registered.
❌ Error 3: Ignoring the 20 cm width rule.
👉 Consequence: If you declare 3919.90... for a 15 cm roll, customs may audit you. If you declare 3919.10... for a 25 cm roll, it’s incorrect.
✅ Fix: Measure and declare exact width.
🎯 VII. Conclusion: Accurate Classification, Zero Tax, Smooth Clearance!
🎯 Key Takeaway:
🔹 "Plastic + Adhesive + Flat Shape = Chapter 39"
🔹 "Roll Width ≤ 20 cm = 3919.10"
🔹 "Total Tax = 0.0%"
🔹 "Don’t Overcomplicate: Vents are Just a Feature!"
📌 Pro Tip:
If your "Vent Patch" contains active medical ingredients (e.g., medicated gel), it may fall under Chapter 30 (Pharmaceuticals) or Chapter 90 (Medical Devices). Double-check the composition!
📣 Immediate Action:
📞 Verify: Check product width and backing material.
📄 Document: Prepare clear product specs and photos.
🚀 Ship: With 0% tariff, these products are highly competitive!
✨ Professional Customs Clearance Starts with Precision!
💼 Every 0% is a 0% Saved!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。