Shoelace Tip
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3926909989 | 22.8% | CN | US | 官方文档 |
| 3926908500 | 24.0% | CN | US | 官方文档 |
| 5609004000 | 38.9% | CN | US | 官方文档 |
| 5609001000 | 37.9% | CN | US | 官方文档 |
| 8308100000 | 0.0% | CN | US | 官方文档 |
| 8308909000 | 37.7% | CN | US | 官方文档 |
商品图片
AI分析
👟 Shoelace Tips (Aglets) – The Small Hardware with Big Compliance Risks
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Customs Strategy
📌 I. Product Definition & Classification: Do You Really Know "Shoelace Tips"?
Shoelace Tips, commonly known as Aglets, are the small components at the ends of shoelaces that prevent fraying and facilitate threading through eyelets. In international trade, these seemingly simple items are classified under two distinct categories depending on their material composition and intended use.
There are two primary types: 1. Metal Aglets: Typically made of brass, nickel, or iron. These fall under "Base Metal Articles." 2. Plastic Aglets: Typically made of PVC, nylon, or polyethylene. These fall under "Articles of Plastics."
⚠️ Key Distinction:
- If made of base metal → Classified under Chapter 83 (Base Metal Articles)
- If made of plastics → Classified under Chapter 39 (Plastics and Articles Thereof)
- Do NOT classify under Chapter 61/62 (Apparel) as they are considered "parts/accessories," not the clothing itself.
📦 II. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
Based on the provided data <DATA>, here are the specific HS Codes for Shoelace Tips (Aglets):
| HS Code | Product Description | Material | Typical Use Case |
|---|---|---|---|
| 8308.10.00.00 | Hooks, eyes, and eyelets (and similar fasteners) | Base Metal | Metal aglets, metal eyelets, metal hooks used for footwear, leather goods, or clothing. |
| 8308.90.90.00 | Other fasteners, including parts; Other | Base Metal | Other metal clasps, buckles, or non-specified metal fasteners for footwear/leather goods. |
| 3926.90.99.89 | Other articles of plastics; Other | Plastics | Plastic aglets that do not fit specific subheadings for clips or fasteners. |
| 3926.90.85.00 | Fasteners, in clips suitable for use in a mechanical attaching device | Plastics | Plastic aglets designed as clip-on fasteners for mechanical attachment. |
🔍 Important Note:
- Shoelace Tips are primarily classified under 8308 if metal, or 3926 if plastic.
- Ensure the declaration specifies "Aglets" or "Shoelace Ends" to avoid confusion with general hardware or apparel parts.
💰 III. 2026 Latest Tariff Rate Detailed Explanation (Including Additional Taxes)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: Current tariff structure applies.
🎯 1. 8308.10.00.00 – Hooks, Eyes, and Eyelets (Base Metal)
| Item | Content |
|---|---|
| Base Duty Rate | 0.0% |
| Additional Duty (Section 301/IEEPA) | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | Base Tariff: 0.0%, Additional Tariff: 0.0% |
📌 Explanation:
- Metal fasteners, hooks, eyes, and metal aglets specifically listed under 8308.10 enjoy a 0% tariff.
- This is a zero-tariff classification, making it highly favorable for clearance.
- No Section 301 or IEEPA surcharges apply to this specific subheading.
🎯 2. 8308.90.90.00 – Other Base Metal Fasteners
| Item | Content |
|---|---|
| Base Duty Rate | 0.0% |
| Additional Duty (Section 301/IEEPA) | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | Base Tariff: 0.0%, Additional Tariff: 0.0% |
📌 Explanation:
- If the aglet is metal but does not fit the "hooks/eyes" description (e.g., a unique clasp-style aglet), it may fall under 8308.90.
- Also enjoys a 0% total tariff.
- No additional surcharges apply.
🎯 3. 3926.90.99.89 – Other Plastic Articles (General)
| Item | Content |
|---|---|
| Base Duty Rate | 5.3% |
| Additional Duty (Section 301/IEEPA) | 7.5% |
| Total Tax Rate | 12.8% |
| Tax Detail | Base Tariff: 5.3%, Additional Tariff: 7.5% |
📌 Explanation:
- Generic plastic aglets that do not fit the "clip" definition fall here.
- Subject to both base tariff and additional tariffs.
- Total cost impact: 12.8% of CIF value.
🎯 4. 3926.90.85.00 – Plastic Fasteners (Clips)
| Item | Content |
|---|---|
| Base Duty Rate | 6.5% |
| Additional Duty (Section 301/IEEPA) | 7.5% |
| Total Tax Rate | 14.0% |
| Tax Detail | Base Tariff: 6.5%, Additional Tariff: 7.5% |
📌 Explanation:
- If aglets are designed as clip-on fasteners for mechanical attachment.
- Highest tariff rate among the options: 14.0%.
- Avoid this classification unless the aglet is explicitly a mechanical clip.
🛠️ IV. Practical Clearance Advice (Battle-Tested Pitfall Guide)
✅ 1. Documentation Checklist (Mandatory)
| Document | Required | Notes |
|---|---|---|
| ✅ Product Specifications | ✔️ | Must specify material (Metal vs. Plastic) and type (Aglet/Hook/Clip). |
| ✅ Material Declaration | ✔️ | Clearly state "Base Metal" (e.g., Brass, Nickel) or "Plastic" (e.g., PVC, Nylon). |
| ✅ Commercial Invoice | ✔️ | Use precise terminology: "Shoelace Tips (Aglets)" or "Metal Eyelets." Avoid vague terms like "Accessories." |
| ✅ Photos | ✔️ | Show close-up of the tip to confirm material and structure. |
| ✅ HS Code Justification | ✔️ | If challenged, provide evidence that the item is a "fastener" or "eyelet" under Chapter 83. |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Metal is Zero, Plastic is Taxed, Be Precise to Save Cash!"
| Scenario | Correct Declaration | Wrong Action |
|---|---|---|
| Metal Aglets | 8308.10.00.00 |
Declare as "Plastic Accessories" → 12.8% tax! |
| Plastic Aglets (Generic) | 3926.90.99.89 |
Declare as "Metal" → False declaration, penalties! |
| Plastic Clip Aglets | 3926.90.85.00 |
Declare as "Other Plastic" → 14.0% vs 12.8% (minor, but be accurate). |
| Mixed Shipment | Split HS Codes | Mix metal and plastic under one code → Audit risk! |
✅ 3. Special Circumstances Handling
| Situation | Handling Advice |
|---|---|
| Mixed Material Aglets | If the aglet has a metal core and plastic cover, determine the essential character. Often still classified under base metal if metal is dominant. Consult a customs broker. |
| OEM Custom Aglets | Provide design files to prove they are "fasteners" and not general hardware. |
| Sample Shipments | Even for samples, declare correctly. Misclassification can lead to future audits. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate (China Origin) | Notes |
|---|---|---|---|
| 🇺🇸 USA | 8308.10.00.00 (Metal) |
0.0% | Zero tariff for metal aglets. Plastic aglets taxed at 12.8%-14.0%. |
| 🇺🇸 USA | 3926.90.99.89 (Plastic) |
12.8% | Significant tariff impact for plastic items. |
| 🇪🇺 EU | 8308.10 / 3926.90 |
Varies (usually 0-2%) | Generally lower tariffs than US, but VAT applies. |
| 🇨🇳 China | 8308.10 / 3926.90 |
Varies | Import duties apply for re-export or domestic sale. |
📌 Conclusion:
- USA offers 0% tariff for metal shoelace tips, making metal aglets a cost-effective choice for US-bound shipments.
- Plastic aglets face double-digit tariffs in the US, impacting margins. Consider material substitution if cost is critical.
📌 VI. Common Mistakes & Pitfall Guide (Blood & Tears Lessons)
❌ Mistake 1: Declaring Metal Aglets as "Plastic Accessories"
👉 Consequence: Paying 12.8% instead of 0%. Overpayment!
❌ Mistake 2: Declaring Plastic Aglets as "Base Metal"
👉 Consequence: Customs Fraud Risk, fines, and seizure. Illegal!
❌ Mistake 3: Vague Description "Shoelace Parts"
👉 Consequence: Customs may reclassify to a higher-tariff category or delay shipment for inspection. Delays!
❌ Mistake 4: Mixing Metal and Plastic in One HS Code Line Item
👉 Consequence: Audit Trigger. Must split into separate line items. Compliance Risk!
✅ Correct Practice:
"Metal Shoelace Tips (Aglets), Brass, 8mm, HS 8308.10.00.00"
"Plastic Shoelace Tips (Aglets), PVC, 8mm, HS 3926.90.99.89"
🎯 VII. Conclusion: Precise Classification, Zero Hassle!
🎯 Remember the Mantra:
🔹 "Metal Aglets = 0% Tariff, Plastic Aglets = 12.8-14% Tariff"
🔹 "Declare Material Clearly, Avoid Fines and Delays!"
📌 Pro Tip:
If your shipment contains both metal and plastic aglets, ensure they are listed as separate line items on the commercial invoice. Merging them into one generic "shoe accessories" line can lead to incorrect tariff application and customs delays.
📣 Immediate Action:
📞 Verify your aglet material composition.
🚀 Choose the correct HS Code (8308.10.00.00for metal,3926.90.99.89for plastic).
💼 Save money, speed up clearance, and stay compliant!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every cent counts in international trade!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。