Soldering Iron Handle Set
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 8515902000 | 86.6% | CN | US | 官方文档 |
| 8515110000 | 37.5% | CN | US | 官方文档 |
| 3926902500 | 24.0% | CN | US | 官方文档 |
| 3926301000 | 24.0% | CN | US | 官方文档 |
商品图片
AI分析
🔥 Soldering Iron Handle Set: HS Code Classification & Customs Clearance Guide (2026)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
📌 I. Product Definition & Classification: What Exactly Is a "Soldering Iron Handle Set"?
A Soldering Iron Handle Set is a critical component or accessory for electrical and electronic repair work. In international trade, its classification depends heavily on what it includes and how it is used:
- As a Part of a Welding Tool: If the handle is sold as an integral part of a soldering iron (electric soldering tool) or as a replacement part specifically designed for such tools, it falls under Chapter 85 (Electrical Machinery and Equipment).
- As a Plastic Accessory: If the handle is primarily viewed as a plastic grip/handle for tools, and not explicitly as a part of a machine, it may fall under Chapter 39 (Plastics and Articles Thereof).
⚠️ Key Distinction:
- If the item is part of a soldering iron or a soldering gun, it is classified as a part/accessory of welding equipment → HS Code 8515.
- If it is a standalone plastic handle not specifically designed as a machine part, it may be classified as a plastic article → HS Code 3926.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Tax Rate (Total) | Tax Breakdown |
|---|---|---|---|---|
| 8515.90.20.00 | Parts/accessories of electric soldering irons/welding machines | Soldering iron handle sold as a part of the tool or set | 86.6% | Base: 1.6%, Section 301: 25%, Section 232: 50%, Section 122: 10% |
| 8515.11.00.00 | Electric soldering guns/irons (with handle) | The handle is part of a complete soldering gun/iron unit | 37.5% | Base: 2.5%, Section 301: 25%, Section 122: 10% |
| 3926.90.25.00 | Other plastic articles, including handles | Handle made of plastic, classified as a general plastic part | 24.0% | Base: 6.5%, Section 301: 7.5%, Section 122: 10% |
| 3926.30.10.00 | Plastic handles and knobs | Plastic handle for tools, classified as plastic fittings | 24.0% | Base: 6.5%, Section 301: 7.5%, Section 122: 10% |
🔍 Important Note:
- 8515.90.20.00 applies if the handle is clearly a part of a welding/soldering machine. The high tax rate (86.6%) includes the 50% Section 232 tariff on steel/aluminum/copper products (if applicable) and 25% Section 301.
- 8515.11.00.00 applies if the handle is part of a complete electric soldering iron/gun. Tax is 37.5%.
- 3926.90.25.00 / 3926.30.10.00 apply if the handle is considered a plastic article rather than a machine part. Tax is 24.0%.
💰 III. 2026 Latest Tariff Rate Details (Including Additional Taxes)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: From November 10, 2025 (and subsequent imports)
🎯 1. 8515.90.20.00 – Parts/Accessories of Soldering Irons/Welding Machines
| Item | Details |
|---|---|
| Base Tariff | 1.6% (ad valorem) |
| Section 301 Tariff | +25% (Trade Act Section 301) |
| Section 232 Tariff | +50% (Steel, Aluminum, Copper Products – if applicable) |
| Section 122 Tariff | +10% (Steel, Aluminum, Copper Products) |
| Total Tariff | 86.6% |
| Tax Calculation | CIF Value × 86.6% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:8515.90.20.00 → FOOTNOTE:232/122 |
📌 Explanation:
- The 50% Section 232 tariff applies if the handle contains steel, aluminum, or copper components.
- The 25% Section 301 tariff is a blanket tariff on many Chinese goods.
- The 10% Section 122 tariff may apply to steel/aluminum products.
- Total: 86.6% – This is an extremely high tariff, requiring careful planning!
🎯 2. 8515.11.00.00 – Electric Soldering Guns/Irons (with Handle)
| Item | Details |
|---|---|
| Base Tariff | 2.5% |
| Section 301 Tariff | +25% |
| Section 122 Tariff | +10% |
| Total Tariff | 37.5% |
| Tax Calculation | CIF Value × 37.5% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | IEEPA:9903.01.24 → USITC:8515.11.00.00 → FOOTNOTE:122 |
📌 Note:
- This code applies when the handle is part of a complete soldering iron/gun.
- No Section 232 tariff applies (as it’s not classified as raw steel/aluminum/copper products).
- Total: 37.5% – Still high, but significantly lower than 86.6%.
🎯 3. 3926.90.25.00 / 3926.30.10.00 – Plastic Handles/Articles
| Item | Details |
|---|---|
| Base Tariff | 6.5% |
| Section 301 Tariff | +7.5% |
| Section 122 Tariff | +10% |
| Total Tariff | 24.0% |
| Tax Calculation | CIF Value × 24.0% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | IEEPA:9901.25 → USITC:3926.90.25.00 → FOOTNOTE:122 |
📌 Note:
- These codes apply when the handle is classified as a plastic article rather than a machine part.
- Total: 24.0% – The lowest tax rate among all options.
- Critical: You must prove the handle is a plastic accessory and not a machine part.
🛠️ IV. Customs Clearance Practical Advice (Avoiding Pitfalls)
✅ 1. Required Documents (Do Not Skip Any)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Dimensions, material (plastic/metal), intended use |
| ✅ Product Photos | ✔️ | Clear images of the handle, labeling, and any packaging |
| ✅ Commercial Invoice | ✔️ | Must clearly state: "Soldering Iron Handle" or "Plastic Handle for Tools" |
| ✅ Packing List | ✔️ | Detail items included in the set |
| ✅ Certificate of Origin (CO) | ✔️ | If non-Chinese, may qualify for reduced tariffs |
| ✅ Third-Party Test Report | ✔️ | RoHS, REACH, or other compliance certs if applicable |
✅ 2. Declaration Tips (Key Mantras)
🔥 "Machine Part = High Tax; Plastic Part = Lower Tax!"
| Scenario | Correct Declaration | Incorrect Action |
|---|---|---|
| Handle as part of soldering iron | 8515.11.00.00 or 8515.90.20.00 |
Misdeclare as plastic → 24% (but may lead to penalties) |
| Standalone plastic handle | 3926.90.25.00 or 3926.30.10.00 |
Declare as machine part → 86.6% |
| Handle with metal core | 8515.90.20.00 |
Misdeclare as plastic → Risk of audit |
✅ 3. Special Cases
| Scenario | Recommendation |
|---|---|
| OEM Custom Handles | Provide customer orders + design drawings to prove intended use |
| Handles with Metal Components | Likely fall under 8515.90.20.00 (86.6%) due to Section 232 |
| Pure Plastic Handles | Use 3926.90.25.00 (24%) to minimize tax |
| Complete Soldering Iron Sets | Use 8515.11.00.00 (37.5%) instead of breaking down parts |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3926.90.25.00 |
24% (Plastic) / 86.6% (Machine Part) | RoHS, CE | High tariffs for machine parts |
| 🇨🇳 China | 8515.90.20.00 |
5% | CCC | No Section 301/232 |
| 🇪🇺 EU | 8515.90.20.00 |
0% (if CE) | CE, RoHS | No additional tariffs |
| 🇦🇺 Australia | 8515.90.20.00 |
5% | RCM | No additional tariffs |
| 🇯🇵 Japan | 8515.90.20.00 |
0% | PSE | No additional tariffs |
📌 Conclusion:
- USA has the highest tariffs for soldering iron parts, especially if classified as machine parts.
- Classifying the handle as a plastic article (3926) can save 62.6% in taxes compared to machine part classification.
- Non-US markets (EU, China, etc.) have much lower tariffs.
📌 VI. Common Mistakes & Pitfalls (Lessons Learned)
❌ Mistake 1: Declaring a machine part as a plastic article without proof
👉 Consequence: Customs audit, fines, or seizure.
❌ Mistake 2: Breaking down a complete soldering iron into parts to avoid high taxes
👉 Consequence: Each part taxed separately, leading to higher total tax (up to 89.5%).
❌ Mistake 3: Ignoring Section 232 (Steel/Aluminum/Copper) tariffs
👉 Consequence: Unexpected 50% tax if metal components are present.
❌ Mistake 4: Using vague descriptions like "Handle" or "Part"
👉 Consequence: Customs classifies it as the highest possible tariff category.
✅ Correct Approach:
"Plastic Handle for Soldering Iron, Model XYZ, Pure Plastic, No Metal Components"
🎯 VII. Conclusion: Professional Declaration, Save Time, Cut Costs!
🎯 Remember the Mantra:
🔹 "Machine Part = 86.6%; Plastic Part = 24%; Complete Tool = 37.5%!"
🔹 "HS Code Determines Life or Death! A small difference in classification saves thousands!"
📌 Pro Tip:
If your handle is pure plastic and not specifically designed as a machine part, declare it under 3926.90.25.00 to pay only 24%.
If it contains metal, it may fall under 8515.90.20.00 (86.6%) due to Section 232.
📣 Immediate Action:
📞 Consult a professional customs broker + Provide product photos + Apply for Advance Ruling
🚀 Ensure your Soldering Iron Handle Set clears customs smoothly, efficiently, and profitably!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every cent of your cost deserves precise calculation!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。