Tack

📌 Push Pins (Decorative Thumbtacks)

🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
📌 I. Product Definition & Classification: What Exactly Are "Push Pins"?

Push pins (often referred to as decorative thumbtacks in trade contexts) are small fasteners used primarily for attaching lightweight materials (such as paper, cork, or fabric) to boards, walls, or display surfaces. In international trade, they are classified based on their material composition and functional design.

The classification hinges on two main factors: 1. Material: Are they made of base metals (like iron, steel, aluminum, copper) or plastics? 2. Function/Design: Are they considered "ornaments/decorations" or "fasteners/clasps"?

⚠️ Key Distinction Points:
- If the pin is primarily plastic and used for decoration or general display → Chapter 39.
- If the pin is metal and shaped like a tack/stud for fastening → Chapter 73 (Articles of Iron/Steel).
- If the pin is a base metal ornament (e.g., decorative heads) → Chapter 83 (Ornaments, Statuettes).
- If the pin is a simple metal fastener (screw/rivet type) → Chapter 73 (Nuts, Bolts, Rivets).

📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)

🔍 Critical Reminder:
- Plastic pins are significantly cheaper in tariffs (15.3%) compared to Metal pins. - Metal pins face heavy penalties due to "Section 301" and "Section 232" tariffs if made of Steel, Aluminum, or Copper (up to 90.7%). - The distinction between 7318 (Fasteners) and 8306 (Ornaments) is critical. If the pin’s primary purpose is decoration rather than mechanical fastening, it may fall under 8306. However, standard office push pins are often deemed fasteners.

💰 III. 2026 Latest Tariff Rate Details (Including Surcharges & Policy Add-ons)

✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: From November 10, 2025 (including subsequent imports)

🎯 1. 3926.40.00.90 —— Plastic Decorative Push Pins

📌 Explanation:
- This is the most cost-effective classification for push pins. - The "10%" is the standard IEEPA tariff on many Chinese goods. - No 25% Section 301 steel/aluminum tariff applies because the primary material is plastic.

🎯 2. 8306.21.00.00 —— Base Metal Ornamental Push Pins

📌 Explanation:
- This applies if the pin is deemed an "ornament" rather than a functional fastener. - Lower than metal fasteners, but higher than plastic.

🎯 3. 8306.29.00.00 —— Other Base Metal Ornaments

📌 Explanation:
- This is the lowest tariff for metal items, IF they can be successfully classified as "other ornaments" rather than fasteners or steel products. - Risky classification if customs views them as functional tacks.

🎯 4. 7318.29.00.00 —— Metal Non-Threaded Fasteners (Steel/Al/Cu)

📌 Explanation:
- This is a catastrophic tariff rate. - Applies if the push pins are made of steel, aluminum, or copper and classified as "fasteners." - The 50% Section 232 tariff is the killer here.

🎯 5. 7318.19.00.00 —— Metal Threaded Fasteners/Rivets (Steel/Al/Cu)

📌 Explanation:
- The highest possible tariff. - Avoid this classification at all costs. Push pins are rarely classified here unless they have specific threaded features.

🛠️ IV. Customs Clearance Operational Advice (Practical Pitfall Guide)

✅ 1. Document Checklist (No Exceptions)

✅ 2. Declaration Strategy (Key Mantra)

🔥 "Plastic is King, Metal is Ring, Fastener is Sting!"

Critical Tip:
- If your push pins have decorative heads (e.g., animal shapes, stars) and metal shafts, try to argue they are "Ornaments" (8306) rather than "Fasteners" (7318). This can drop the tariff from ~90% to 10%. - However, if they are plain, functional office tacks, customs will likely classify them as fasteners.

✅ 3. Special Cases

🌍 V. Global Market Comparison (2026 Latest)

📌 Conclusion:
- USA is the most hostile market for metal push pins due to Section 232/301 tariffs. - Plastic push pins are the safest and most profitable option for US import. - Consider supply chain diversification (e.g., manufacture in Vietnam/Mexico) if importing large volumes of metal pins to the US to avoid surcharges.

📌 VI. Common Mistakes & Pitfalls (Lessons Learned)

❌ Mistake 1: Declaring Metal Push Pins as "Plastic"
👉 Consequence: Customs inspection finds metal → Fraud Penalty + Back Taxes + Seizure.

❌ Mistake 2: Classifying Functional Metal Tacks as "Ornaments" without proof
👉 Consequence: Customs reclassifies as Fasteners → Tariff jumps from 10% to 87.8%.

❌ Mistake 3: Ignoring "Section 232" on Steel/Aluminum Pins
👉 Consequence: Unexpected 50% surcharge on top of other tariffs.

✅ Correct Action:

"Decorative Plastic Push Pins, Mixed Colors, Assorted Shapes, Model XYZ, 1000pcs/Box"
(Use HS Code 3926.40.00.90)

"Metal Decorative Push Pins (Non-functional Ornaments), Gold/Silver Finish, Model ABC"
(Attempt HS Code 8306.29.00.00 for 10% tariff)

🎯 VII. Conclusion: Professional Declaration, Cost Savings, Efficiency!

🎯 Remember the Mantra:

🔹 "Plastic Pins: 15.3% (Safe)"
🔹 "Metal Ornaments: 10% (Risky but Worth Trying)"
🔹 "Metal Fasteners: 87-90% (Catastrophic)"
🔹 "Always Specify Material in Description!"

📌 Tips:

• If your push pins are decorative, emphasize the ornamental design (head shape, color, packaging) in your invoice and photos to support an 8306 classification.
• If they are plain, stick to 3926 (Plastic) or accept the high cost of 7318 (Metal).
• Pre-ruling: Consider applying for a Binding Tariff Information (BTI) or Advance Ruling from CBP if importing high volumes to secure the correct classification.

📣 Immediate Action:

📞 Consult with a customs broker + Provide product images + Confirm material composition
🚀 Ensure your push pins, clear customs smoothly, maximize profit!

✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent in Tariff Matters!