Transparent Suction Cup Clip
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3926908500 | 24.0% | CN | US | 官方文档 |
| 3926909989 | 22.8% | CN | US | 官方文档 |
| 8302496055 | 90.7% | CN | US | 官方文档 |
| 8302498040 | 38.5% | CN | US | 官方文档 |
| 7326908688 | 87.9% | CN | US | 官方文档 |
| 7326908635 | 87.9% | CN | US | 官方文档 |
商品图片
AI分析
🌬️ Transparent Suction Cup Clip (Vacuum Suction Holders)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
📌 I. Product Definition & Classification: What is a "Transparent Suction Cup Clip"?
A Transparent Suction Cup Clip is a versatile fixing device used to mount transparent items (such as glass, acrylic, or polycarbonate panels) or lightweight objects to smooth vertical surfaces. It consists of a silicone or rubber suction cup base and a transparent plastic or acrylic bracket/clip mechanism.
In international trade, these items are not classified together. Their HS Code depends entirely on the material composition of the primary fixing component and the intended application (e.g., general use vs. automotive/aviation).
⚠️ Critical Distinction:
- If the product is a general-purpose plastic clip/holder → It falls under Chapter 39 (Plastics).
- If the product includes metal components (such as metal hooks, brackets, or anchor plates) for furniture, doors, or vehicles → It may fall under Chapter 73 (Iron/Steel) or Chapter 83 (Base Metal Fittings).
- Pure Silicone Rugs? If it's just a suction cup without a clip, it might be different, but "Clip" implies a holding mechanism, often plastic or metal.
Based on the provided <DATA>, we have two distinct pathways: Plastic General Use vs. Metal/Furniture/Vehicle Fittings.
📦 II. HS Code Classification Details (2026 Latest Tariff Reference)
| HS Code | Product Description | Material/Feature | Application Scenario |
|---|---|---|---|
3926.90.85.00 |
Other articles of plastics: Fasteners, in clips suitable for use in a mechanical attaching device | Plastic (Transparent/PVC/Acrylic) | General household, office, or industrial plastic clips that engage with mechanical devices. |
3926.90.99.89 |
Other articles of plastics and articles of other materials of headings 3901 to 3914: Other | Plastic (Various plastics, not specified elsewhere) | General plastic holders, non-mechanical attaching clips, or other plastic fixtures not specifically "fasteners in clips". |
7326.90.86.88 |
Other articles of iron or steel: Other | Steel/Iron (Coated/Painted) | If the "clip" part is made of metal (e.g., a metal bracket with a rubber/silicone pad), or if the suction cup has metal anchor plates. |
7326.90.86.35 |
Other articles of iron or steel: Fence posts, studded... (Similar protrusions) | Steel/Iron (Special Protrusions) | Note: This code is for studded fence posts or items with knobs/studs. ⛔ Likely Incorrect for suction cups unless the product is a specialized steel fixture with protrusions resembling studs. Use with caution. |
8302.49.60.55 |
Base metal mountings... for furniture, doors...: Other... Of iron or steel, aluminum or zinc... For aircraft, vessels and other vehicles | Base Metal (Iron/Steel/Aluminum) | If the clip is a metal fitting attached to a vehicle, aircraft, or vessel. |
8302.49.80.40 |
Base metal mountings...: For railway vehicles, aircraft...: Of copper | Copper | Unlikely for transparent suction cup clips. Included for completeness if metal parts are copper. |
🔍 Key Insight:
- Most "Transparent Suction Cup Clips" sold on e-commerce platforms are primarily Plastic (PMMA/Acrylic) or Silicone.
- Therefore,3926.90.85.00or3926.90.99.89are the most probable codes.
- Only if the clip has a significant metal framework (e.g., a metal hook holding a plastic cup) should you consider Chapter 73 or 83.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: 2025-11-10 (and subsequent imports)
🎯 1. Plastic Suction Cup Clips (Most Common)
A. 3926.90.85.00 – Fasteners in clips suitable for mechanical attaching
| Item | Detail |
|---|---|
| Basic Tariff | 6.5% (ad valorem) |
| Section 301 Surcharge | +7.5% |
| Total Tariff | 14.0% |
| Tax Calculation | CIF Value × 14.0% |
| De Minimis Eligibility | ✅ Yes (if value ≤ $800, generally exempt from duties under Section 321, but check current rules) |
| Legal Reference Path | HTSUS:3926.90.85.00 → Section 301 Footnote |
📌 Explanation:
- This code applies if the plastic clip is designed as a fastener that engages with a mechanical device.
- The rate is relatively low compared to metal products.
- Note: If classified under3926.90.99.89, the rate is 12.8% (5.3% Basic + 7.5% Surcharge).
B. 3926.90.99.89 – Other plastic articles
| Item | Detail |
|---|---|
| Basic Tariff | 5.3% (ad valorem) |
| Section 301 Surcharge | +7.5% |
| Total Tariff | 12.8% |
| Tax Calculation | CIF Value × 12.8% |
| De Minimis Eligibility | ✅ Yes (if value ≤ $800) |
🎯 2. Metal-Component Suction Cup Clips (If applicable)
A. 7326.90.86.88 – Other steel articles
| Item | Detail |
|---|---|
| Basic Tariff | 2.9% |
| Section 301 Surcharge | +25.0% |
| Section 301 (Steel/Aluminum/Copper) Surcharge | +50% (See Note Below) |
| Total Tariff | 77.9% |
| Tax Calculation | CIF Value × 77.9% |
| De Minimis Eligibility | ❌ No (Deny De Minimis) |
| Legal Reference Path | HTSUS:7326.90.86.88 → Section 301 Steel/Aluminum/Copper Footnote |
📌 Critical Warning:
- If the product contains steel, it is subject to the additional 50% tariff under the "Steel, Aluminum, Copper Products" surcharge (Section 301).
- Even if the main body is plastic, if the clip/holding mechanism is considered a "base metal article" or if the product is classified as steel, the 77.9% rate applies.
- This is a high-cost trap. Ensure the product is not primarily steel.
B. 8302.49.60.55 – Base metal fittings for vehicles/aircraft
| Item | Detail |
|---|---|
| Basic Tariff | 5.7% |
| Section 301 Surcharge | +25.0% |
| Section 301 (Steel/Aluminum/Copper) Surcharge | +50% |
| Total Tariff | 80.7% |
| Tax Calculation | CIF Value × 80.7% |
| De Minimis Eligibility | ❌ No |
📌 Note: This applies if the clip is considered a fitting for aircraft, vessels, or other vehicles and is made of base metal (steel/aluminum/zinc).
🛠️ IV. Customs Clearance Practical Advice (Avoiding Pitfalls)
✅ 1. Document Preparation Checklist (Mandatory)
| Document | Required? | Purpose |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state: Material (e.g., "Acrylic Clip + Silicone Suction Cup"), Dimensions, Load Capacity. |
| ✅ Product Photos | ✔️ | Show the entire assembly. Highlight that the clip is plastic (if plastic) or metal (if metal). |
| ✅ Commercial Invoice | ✔️ | Description must be precise: "Plastic Suction Cup Holder for Glass Panels, Model XYZ, 100% Acrylic Body" |
| ✅ HS Code Pre-Ruling (Optional but Recommended) | ✔️ | If the product has mixed materials, get a binding ruling to confirm if it falls under 3926 (Plastic) or 7326 (Steel). |
| ✅ Material Declaration | ✔️ | Explicitly state: "90% Plastic, 10% Silicone/Rubber". Avoid saying "Metal Suction Cup" if it’s plastic. |
✅ 2. Classification Strategy (Key Rules)
| Scenario | Recommended HS Code | Reasoning |
|---|---|---|
| All-Plastic Clip (Acrylic/PVC body, rubber/silicone suction pad) | 3926.90.85.00 or 3926.90.99.89 |
The primary material is plastic. The suction pad is an accessory. |
| Metal Hook + Plastic Cup | ⚠️ Risk: 7326.90.86.88 |
If the metal part is integral to the function, it may be classified as steel. Avoid this classification if possible. |
| Furniture Fitting (Metal) | 8302.49.60.55 |
Only if it’s a dedicated mounting bracket for furniture/doors made of base metal. |
| Fence Post with Studs | 7326.90.86.35 |
❌ Do NOT use unless it is literally a studded steel fence post. |
🔥 Golden Rule:
"If it looks like plastic and functions like a plastic clip, declare it as plastic (3926).
Do NOT let the rubber/silicone suction pad trigger a steel classification unless there is actual steel involved in the holding mechanism."
✅ 3. Special Cases & Troubleshooting
| Case | Handling Advice |
|---|---|
| Mixed Materials | If the clip has a metal screw or hook, declare the primary material. If the metal part is <50% of value/weight, argue for Plastic classification. |
| OEM/Custom Colors | Provide color codes and material safety data sheets (MSDS) for the silicone/rubber part to ensure it’s not classified as a "chemical product." |
| High-Value Industrial Clips | If used in aerospace or automotive, ensure proper certification (e.g., FAA/FAA) is provided, even if the HS Code is 3926. |
| De Minimis Loophole | If shipping individually to consumers (<$800), consider using 3926 to benefit from de minimis exemption (no duty). Avoid 7326 as it denies de minimis. |
🌍 V. Global Market Comparison (2026)
| Country | Recommended HS Code | Estimated Duty | Notes |
|---|---|---|---|
| 🇺🇸 USA | 3926.90.85.00 |
14.0% (China Origin) | Low duty. Avoid steel classification (7326) due to 77.9% rate. |
| 🇨🇳 China | 3926.90.99.00 |
~10-15% | Standard import tariff. |
| 🇪🇺 EU | 3926.90.97 |
4.5% | No Section 301 surcharge. |
| 🇬🇧 UK | 3926.90.90 |
4.5% | Post-Brexit tariff. |
📌 Conclusion:
- The USA is the most challenging market due to the Section 301 surcharges.
- For China-origin goods, Plastic (3926) is significantly cheaper than Steel (7326) due to the 50% additional surcharge on steel products.
- Strategic Recommendation: If your product can be designed with a plastic bracket instead of a metal one, do so to save ~64% in tariffs.
📌 VI. Common Errors & Pitfalls (Lessons Learned)
❌ Error 1: Misclassifying a plastic suction cup as "Steel Article" because it has a rubber pad.
👉 Consequence: 77.9% tariff instead of 14.0%. Cost Increase: 63.9%!
❌ Error 2: Using 7326.90.86.35 for a suction cup.
👉 Consequence: Customs rejects the code as it refers to studded fence posts. Shipment Delayed.
❌ Error 3: Not declaring the material composition.
👉 Consequence: Customs assumes the worst (Steel) and applies the highest duty.
✅ Correct Practice:
"Transparent Acrylic Suction Cup Clip for Glass Panels, Model XYZ, 100% Plastic Body, Silicone Suction Pad, FCC/RoHS Compliant"
🎯 VII. Conclusion: Smart Classification Saves Money
🎯 Key Takeaway:
🔹 "Plastic Clips = 14% Duty (or 12.8%). Steel Clips = 77.9% Duty."
🔹 "If it’s not steel, don’t declare it as steel. Save $64,000 per $100,000 shipment!"
🔹 "Use3926.90.85.00or3926.90.99.89for transparent suction cup clips."
📌 Pro Tip:
If you are shipping to the USA, ensure your invoice clearly states "Plastic Material" to avoid automatic steel classification flags. Consider applying for an Advance Ruling from CBP if your product has mixed materials.
📣 Immediate Action:
📞 Verify material composition → Select
3926HS Code → Prepare detailed specs → Clear Customs Smoothly!
✨ Professional Customs Clearance Starts with Precise Classification!
💼 Your Profit Margin Depends on This 2-Digit HS Code!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。