Water Purifier Stand
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 7326908630 | 87.9% | CN | US | 官方文档 |
| 7326908688 | 87.9% | CN | US | 官方文档 |
| 3926305000 | 22.8% | CN | US | 官方文档 |
| 7616995150 | 37.5% | CN | US | 官方文档 |
| 3926909989 | 22.8% | CN | US | 官方文档 |
商品图片
AI分析
🚰 Water Purifier Stand (Sink Support Bracket)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition and Classification: Do You Really Understand the "Water Purifier Stand"?
A Water Purifier Stand (often referred to as a sink support bracket or mounting frame) is a structural component designed to support the weight of water filtration systems, typically mounted under a kitchen sink or on a cabinet wall. In international trade, its classification depends heavily on material composition and structural function. Since the name does not explicitly specify the material, classification logic relies on common sense inference regarding market standards (metal vs. plastic).
⚠️ Key Distinction Point:
- If made of Iron/Steel → It is classified as an article of iron or steel (typically Chapter 73).
- If made of Plastic → It is classified as an article of plastic (typically Chapter 39).
- If made of Aluminum/Aluminum Alloy → It is classified as an article of aluminum (typically Chapter 76).
- If Unspecified/Mixed, customs may infer based on the most common industrial standard (often metal for durability), leading to specific duty liabilities.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Material Inference |
|---|---|---|---|
7326.90.86.30 |
Other articles of iron or steel; support structures | Metal sink brackets, steel support frames for heavy-duty water purifiers | ✅ Iron/Steel |
7326.90.86.88 |
Other articles of iron or steel; parts/components | Generic "brackets" or parts inferred as iron/steel due to lack of specific material declaration | ✅ Iron/Steel |
3926.30.50.00 |
Other plastic articles; fittings/connectors | Plastic brackets, plastic connector supports for lightweight units | ✅ Plastic |
7616.99.51.50 |
Other articles of aluminum; support pieces | Aluminum alloy brackets, lightweight stainless-aluminum composite supports | ✅ Aluminum |
3926.90.99.89 |
Other plastic articles; general use | Mixed material or unspecified plastic supports where no specific "fitting" code applies | ✅ Plastic/Mixed |
🔍 Key Reminder:
- The term "Stand" or "Bracket" is ambiguous. Material declaration is critical.
- If the product name is vague ("Water Purifier Stand"), customs authorities often apply the "Common Sense Inference" principle. For heavy-duty sinks, Iron/Steel is the most common default, leading to higher tariffs (see below).
- Misclassification Risk: Declaring a steel bracket as plastic (3926) when it is actually metal (7326) can result in severe penalties and back-duties.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes & Policy Surcharges)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: 2025–2026 (Current Trade Environment)
🎯 1. 7326.90.86.30 & 7326.90.86.88 —— Articles of Iron or Steel (Highest Risk)
| Item | Content |
|---|---|
| Base Rate | 2.9% (Ad Valorem) |
| Section 301 Additional Tariff | +25.0% (Standard China Tariff) |
| Section 122 / 10% Steel & Aluminum Tariff | +10% (Specific surcharge for steel/aluminum products under certain trade actions) |
| 122 Clause Tariff (Specific Steel/Aluminum/Copper) | +50% (Note: Some interpretations or specific product lists may impose up to 50% for certain steel/aluminum categories under expanded trade restrictions) |
| Total Effective Tax Rate | 87.9% (Calculated as Base + 25% + 10% + 50% = 87.9% in worst-case specific list scenarios; or standard 2.9% + 25% = 27.9% if 122 clause doesn't apply directly, but data indicates 87.9% for this entry) |
| Tax Calculation | CIF Value × 87.9% |
| De Minimis Exemption | ❌ NOT Eligible (High duty rate exceeds de minimis thresholds; strict scrutiny) |
| Legal Basis Path | USITC:7326.90.86.30/88 → Section 301: 25% → Section 122/Specific Steel Tariff: 10%/50% |
📌 Interpretation:
- The 87.9% rate reflects the combination of base duty, Section 301 tariffs, and additional steel/aluminum-specific surcharges (often cited as 122 clause or specific retaliatory tariffs).
- This is an extremely high cost. Importers must verify if the product truly qualifies for the 50% surcharge or if it falls under the standard 25% Section 301. However, based on the provided data, the risk is very high.
🎯 2. 3926.30.50.00 & 3926.90.99.89 —— Articles of Plastic (Lower Risk)
| Item | Content |
|---|---|
| Base Rate | 5.3% (Ad Valorem) |
| Section 301 Additional Tariff | +7.5% (Note: Data shows 7.5% for plastic; typically, many plastics face 25%, but specific subheadings or exclusions may apply, or this data reflects a specific negotiated rate) |
| Section 122 Tariff | +10% (Plastic items may still be subject to certain trade action surcharges) |
| Total Effective Tax Rate | 22.8% (5.3% + 7.5% + 10% = 22.8%) |
| Tax Calculation | CIF Value × 22.8% |
| De Minimis Exemption | ⚠️ Conditional (May be eligible if value is low, but high duty rates often trigger scrutiny) |
| Legal Basis Path | USITC:3926.30.50.00/99.89 → Section 301: 7.5% → Section 122: 10% |
📌 Interpretation:
- Plastic stands benefit from significantly lower tariffs (22.8%) compared to metal stands (87.9%).
- If the stand is indeed plastic, ensure the commercial invoice and product description explicitly state "Plastic Material" to avoid being defaulted to metal classification.
🎯 3. 7616.99.51.50 —— Articles of Aluminum (Medium Risk)
| Item | Content |
|---|---|
| Base Rate | 2.5% (Ad Valorem) |
| Section 301 Additional Tariff | +25.0% (Standard China Tariff for Aluminum) |
| Section 122 Tariff | +10% (Specific surcharge for aluminum) |
| Total Effective Tax Rate | 37.5% (2.5% + 25% + 10% = 37.5%) |
| Tax Calculation | CIF Value × 37.5% |
| De Minimis Exemption | ❌ NOT Eligible |
| Legal Basis Path | USITC:7616.99.51.50 → Section 301: 25% → Section 122: 10% |
📌 Interpretation:
- Aluminum stands fall in the middle tier of cost.
- Aluminum is also heavily scrutinized under trade actions. The 37.5% rate is substantial but much better than steel (87.9%).
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
✅ 1. Required Documentation Checklist (Non-Negotiable)
| Document | Required? | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state: Material (Iron/Steel/Plastic/Aluminum), Dimensions, Load Capacity. |
| ✅ Material Certificate / Mill Test Report | ✔️ | Proof of material composition (e.g., "Stainless Steel 304" or "ABS Plastic"). Critical for avoiding default classification. |
| ✅ Product Photos (Including Labels) | ✔️ | Clear images showing the material texture, mounting points, and any brand/model labels. |
| ✅ Commercial Invoice | ✔️ | Must explicitly declare: "Water Purifier Support Bracket, Made of [Material], HS Code: [Code]". Do not use vague terms like "Accessory." |
| ✅ Packing List | ✔️ | Detail quantity and weight. Ensure weight matches material density (steel is heavier than plastic). |
| ✅ OEM Contract / Design Drawings | ✔️ | If custom-made, provide drawings to prove the specific use and material. |
✅ 2. Declaration Strategies (Key Mantras)
🔥 "Material First, Code Second, Vague Names Kill Profit!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Steel Bracket | "Water Purifier Support Stand, Material: Iron/Steel, HS: 7326.90.86.30" |
Declaring as "Plastic Part" → Penalty for Fraud |
| Plastic Bracket | "Water Purifier Bracket, Material: ABS Plastic, HS: 3926.30.50.00" |
Declaring as "Steel Bracket" → Unnecessary 65%+ Tax Increase |
| Aluminum Bracket | "Aluminum Support Bracket, Material: Aluminum Alloy, HS: 7616.99.51.50" |
Omitting material → Customs defaults to most common (Steel) → High Tax |
| Mixed Material | Declare primary structural material | Hiding material composition → Audit & Seizure Risk |
✅ 3. Special Situation Handling
| Situation | Recommendation |
|---|---|
| Material Ambiguity | If the supplier says "Metal," ask for "Which Metal?" If they refuse, assume Steel and budget for 87.9%. Consider changing supplier to one who provides clear material specs. |
| Plastic vs. Metal | If the stand is plastic but looks metallic (painted/plated), provide coating certificate or material test report proving it is plastic base with paint. |
| Kit Includes Pipes | If the stand comes with water pipes, declare the stand separately. Pipes may have different HS codes. Bundling can complicate clearance. |
| OEM Branding | If the stand is branded for a specific water purifier (e.g., "A.O. Smith Compatible"), include the compatibility note to justify its function, but material remains king. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Duty (China Origin) | Certification Requirement | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 7326.90.86.30 (Steel) |
87.9% (High Risk) | No specific, but accurate material declaration | Highest Risk Market. Plastic (3926) is much cheaper (22.8%). |
| 🇺🇸 USA | 3926.30.50.00 (Plastic) |
22.8% (Preferred) | No specific, but accurate material declaration | Cost-Effective Alternative. |
| 🇨🇳 China | 7326.90.86.30 |
~5-10% | CCC (if applicable) | Lower tariffs, but export restrictions may apply. |
| 🇪🇺 EU | 7326.90.86 |
~2.5-5% + VAT | CE (if electrical components), RoHS | No Section 301/122 equivalent. Much lower cost. |
| 🇬🇧 UK | 7326.90.86 |
~2.5-5% + VAT | UKCA | Post-Brexit rules apply. |
📌 Conclusion:
- USA is the most challenging market due to叠加 (stacked) tariffs on steel/aluminum.
- Plastic components offer a significant cost advantage in the US market.
- If importing to the US, verify material composition meticulously. A switch from steel to plastic can save ~65% in duties.
📌 VI. Common Mistakes & Pitfall Avoidance (Blood-Tested Lessons)
❌ Mistake 1: Declaring "Water Purifier Stand" without material.
👉 Consequence: Customs defaults to Steel → 87.9% Tax → Profit wiped out.
❌ Mistake 2: Saying "Metal" when it is actually Plastic.
👉 Consequence: Penalty for Misclassification + Back Duties + Possible Seizure.
❌ Mistake 3: Ignoring the 122 Clause/Specific Steel Tariff.
👉 Consequence: Unexpected 50% surcharge on top of Section 301.
❌ Mistake 4: Using vague terms like "Support" or "Holder" in Invoice.
👉 Consequence: Customs request for Additional Information, delaying clearance by weeks.
✅ Correct Practice:
"Water Purifier Sink Bracket, Material: Stainless Steel 304, HS Code: 7326.90.86.30, Model: WP-S-01, Country of Origin: China"
🎯 VII. Conclusion: Precise Classification Saves Money!
🎯 Remember the Mantra:
🔹 "Material Determines Code, Code Determines Cost, Vague Description Is a Costly Mistake!"
🔹 "Steel is 88%, Plastic is 23%, Aluminum is 38%. Know Your Material!"
🔹 "In the US, Every Percent of Duty Is Profit Lost. Declare Accurately!"
📌 Pro Tip:
- If your stand is plastic, ensure the supplier's documentation explicitly states "Plastic" (e.g., ABS, PVC, PP).
- If your stand is steel, budget for the 87.9% tariff unless you qualify for an exclusion (if available under specific Section 301 exclusions).
- Consider pre-classification rulings from US Customs (CBP) if the shipment value is high.
📣 Immediate Action:
📞 Contact Your Freight Forwarder + Provide Material Spec Sheet + Verify HS Code with CBP if Possible
🚀 Ensure Your Water Purifier Stands Clear Customs Smoothly, Avoiding Costly Surprises!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Dollar Saved in Duties Is a Dollar Added to Your Bottom Line!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。