acrylic plastic thermoforming sheet
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3920591000 | 41.0% | CN | US | 官方文档 |
| 3921190090 | 41.5% | CN | US | 官方文档 |
| 3921905050 | 39.8% | CN | US | 官方文档 |
| 3920515090 | 41.5% | CN | US | 官方文档 |
| 3906902000 | 41.3% | CN | US | 官方文档 |
| 3906100000 | 41.3% | CN | US | 官方文档 |
商品图片
AI分析
🎯 Acrylic Plastic Thermoforming Sheet
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Expert-Level Import Strategy
📌 One Product, Five HS Codes — Know the Difference to Avoid 45%+ Tariffs!
📦 I. Product Definition & Classification: What Is an Acrylic Plastic Thermoforming Sheet?
An acrylic plastic thermoforming sheet is a flat, flexible sheet made from acrylic polymers (e.g., polymethyl methacrylate or PMMA), shaped through heat and pressure into custom forms (e.g., signage, display cases, automotive parts, medical enclosures).
⚠️ Critical Distinction:
- If it's pure acrylic sheet (no additives, no composite layers) → HS Code 3920.59.10.00 or 3920.51.50.90
- If it's not pure acrylic, but general plastic → HS Code 3921.19.00.90 or 3921.90.50.50
- If it’s in raw, unprocessed form → HS Code 3906.90.20.00 or 3906.10.00.00🔍 Key Clue:
- "Thermoforming sheet" = plastic sheet ready for shaping
- "Acrylic" = specifically PMMA or acrylic polymer
- "Sheet" = flat, non-structural, non-embossed
📊 II. HS Code Breakdown (2026 Official Tariff Matrix)
| HS Code | Product Description | Material Type | Form | Why This Code? |
|---|---|---|---|---|
3920.59.10.00 |
Acrylic plastic thermoforming sheet, made of acrylic polymer, in sheet form | Acrylic Polymer | Sheet | Matches 3920.59.10.00: "Plates, sheets, film, foil, and strip of acrylic polymer" |
3921.19.00.90 |
Acrylic plastic thermoforming sheet, plastic material, sheet form, other | General Plastic | Sheet | Falls under 3921.19.00.90: "Other plastic sheets" |
3921.90.50.50 |
Acrylic plastic thermoforming sheet, plastic, sheet, no conflict | General Plastic | Sheet | Matches 3921.90.50.50: "Other plastic sheets" |
3920.51.50.90 |
Acrylic plastic thermoforming sheet, made of polymethyl methacrylate (PMMA), sheet form | PMMA (Acrylic) | Sheet | Matches 3920.51.50.90: "Plates, sheets, film, etc., of PMMA" |
3906.90.20.00 |
Acrylic plastic thermoforming sheet, acrylic polymer, in primary form | Acrylic Polymer | Sheet | Fits 3906.90.20.00: "Other primary forms of plastic" |
3906.10.00.00 |
Acrylic plastic thermoforming sheet, PMMA, in primary form | PMMA | Sheet | Matches 3906.10.00.00: "Primary forms of acrylic polymers" |
✅ Bottom Line:
- Acrylic = PMMA = Acrylic Polymer → Use 3920.51.50.90 or 3920.59.10.00
- General plastic = not pure acrylic → Use 3921.19.00.90 or 3921.90.50.50
- Raw, unprocessed sheet → Use 3906.10.00.00 or 3906.90.20.00
💰 III. 2026 Tariff Breakdown (US Market – China Origin)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025
✅ All rates apply to CIF value
🎯 1. 3920.59.10.00 – Acrylic Sheet (Acrylic Polymer, Sheet)
| Item | Value |
|---|---|
| Base Tariff | 6.0% |
| Section 301 (USITC) Additional Duty | +25.0% |
| Section 122 (IEEPA) Emergency Duty | +10.0% |
| Total Effective Tariff | 41.0% |
| Tax Calculation | CIF × 41.0% |
| De Minimis Exemption | ❌ Not available (denied under 9903.01.25) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3920.59.10.00 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- 25% USITC = 301 Tariff on Chinese goods under Section 301 of Trade Act
- 10% IEEPA = Emergency powers on China-origin goods (since 2025)
- Total: 41% — High-risk, high-cost — Must verify material purity!
🎯 2. 3921.19.00.90 – Other Plastic Sheet (General Plastic, Sheet)
| Item | Value |
|---|---|
| Base Tariff | 6.5% |
| USITC Additional Duty | +25.0% |
| IEEPA Emergency Duty | +10.0% |
| Total Effective Tariff | 41.5% |
| Tax Calculation | CIF × 41.5% |
| De Minimis Exemption | ❌ Not available |
| Legal Basis Path | IEEPA:9901.25 → IEEPA:9903.01.24 → USITC:3921.19.00.90 → FOOTNOTE:9903.88.01 |
📌 Note:
- Even if the sheet is acrylic, if not declared as pure acrylic polymer, it may be misclassified → 41.5% instead of 41.0%
- Small error = 0.5% higher tax → $5,000 more on $1M shipment!
🎯 3. 3921.90.50.50 – Other Plastic Sheet (General Plastic, Sheet)
| Item | Value |
|---|---|
| Base Tariff | 4.8% |
| USITC Additional Duty | +25.0% |
| IEEPA Emergency Duty | +10.0% |
| Total Effective Tariff | 39.8% |
| Tax Calculation | CIF × 39.8% |
| De Minimis Exemption | ❌ Not available |
| Legal Basis Path | IEEPA:9901.25 → IEEPA:9903.01.24 → USITC:3921.90.50.50 → FOOTNOTE:9903.88.01 |
📌 Why Lower?
- Lower base rate (4.8%) due to non-acrylic plastic classification
- Still subject to 25% + 10% — Total 39.8%
- Only valid if material is NOT acrylic — Misclassification risk!
🎯 4. 3920.51.50.90 – PMMA Sheet (Polymethyl Methacrylate, Sheet)
| Item | Value |
|---|---|
| Base Tariff | 6.5% |
| USITC Additional Duty | +25.0% |
| IEEPA Emergency Duty | +10.0% |
| Total Effective Tariff | 41.5% |
| Tax Calculation | CIF × 41.5% |
| De Minimis Exemption | ❌ Not available |
| Legal Basis Path | IEEPA:9901.25 → IEEPA:9903.01.24 → USITC:3920.51.50.90 → FOOTNOTE:9903.88.01 |
📌 Key Insight:
- PMMA = Acrylic = Acrylic Polymer → Should be 3920.59.10.00
- But if declared as PMMA, US Customs may apply 41.5%
- Always verify whether 3920.59.10.00 is the correct code for PMMA sheet
🎯 5. 3906.90.20.00 – Primary Form, Acrylic Polymer
| Item | Value |
|---|---|
| Base Tariff | 6.3% |
| USITC Additional Duty | +25.0% |
| IEEPA Emergency Duty | +10.0% |
| Total Effective Tariff | 41.3% |
| Tax Calculation | CIF × 41.3% |
| De Minimis Exemption | ❌ Not available |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3906.90.20.00 → FOOTNOTE:9903.88.01 |
📌 When to Use?
- Only if the sheet is in primary form (i.e., not yet thermoformed, not cut, not shaped)
- If already thermoformed, do NOT use this code → Risk of audit & penalty
🎯 6. 3906.10.00.00 – Primary Form, PMMA
| Item | Value |
|---|---|
| Base Tariff | 6.3% |
| USITC Additional Duty | +25.0% |
| IEEPA Emergency Duty | +10.0% |
| Total Effective Tariff | 41.3% |
| Tax Calculation | CIF × 41.3% |
| De Minimis Exemption | ❌ Not available |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3906.10.00.00 → FOOTNOTE:9903.88.01 |
📌 Use Only If:
- Sheet is raw, unprocessed, uncut, unshaped
- Not thermoformed
- No surface treatment (e.g., anti-reflective coating, UV protection)
🛠️ IV. Customs Clearance Best Practices (Pro Tips to Save $10K+)
✅ 1. Required Documentation (MUST Provide)
| Document | Required? | Why It Matters |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Prove material is acrylic polymer or PMMA |
| ✅ Material Safety Data Sheet (MSDS) | ✔️ | Confirm no additives or composite layers |
| ✅ Certificate of Origin (CO) | ✔️ | If from China → 41%+ tax applies |
| ✅ Lab Test Report (e.g., FTIR, DSC) | ✔️ | Prove acrylic polymer composition |
| ✅ Commercial Invoice | ✔️ | Must state: "Acrylic Plastic Thermoforming Sheet, PMMA, Sheet Form" |
| ✅ Product Photos (with label) | ✔️ | Show thickness, size, surface finish |
| ✅ Packing List | ✔️ | Show total weight, number of sheets, packaging |
✅ 2.申报技巧 (Key Rules)
🔥 "Material First, Form Second, Origin Last!"
| Scenario | Correct HS Code | Wrong Code | Risk |
|---|---|---|---|
| Pure acrylic sheet, uncut | 3920.59.10.00 or 3920.51.50.90 |
3921.19.00.90 |
+0.5% tax |
| PMMA sheet, labeled as acrylic | 3920.51.50.90 |
3906.10.00.00 |
Wrong form → audit risk |
| Already thermoformed | 3920.59.10.00 |
3906.10.00.00 |
Wrong classification → penalty |
| Mixed plastic (not acrylic) | 3921.19.00.90 |
3920.59.10.00 |
False claim → fines |
✅ 3. Special Cases & Solutions
| Case | Solution |
|---|---|
| Acrylic sheet with UV coating | Still 3920.59.10.00 — no change |
| Acrylic sheet with anti-glare film | Still 3920.59.10.00 — as long as not laminated |
| Acrylic sheet with embossing | Use 3920.59.10.00 — if still sheet form |
| Acrylic sheet cut into shapes | Use 3920.59.10.00 — if not assembled into product |
| Acrylic sheet used in medical device | Can apply for non-commercial exemption — requires FDA letter |
🌍 V. Global Market Tariff Comparison (2026)
| Country | Recommended HS Code | Tariff | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA (China origin) | 3920.59.10.00 |
41.0% | None (but must prove material) | Highest tariff |
| 🇨🇳 China | 3920.59.10.00 |
5% | CCC | No extra duties |
| 🇪🇺 EU | 3920.59.10.00 |
0% | CE | No 301/IEEPA |
| 🇦🇺 Australia | 3920.59.10.00 |
5% | RCM | No extra duties |
| 🇯🇵 Japan | 3920.59.10.00 |
0% | PSE | No extra duties |
📌 Insight:
- Only the US imposes 41%+ tariffs on acrylic sheets from China
- China, EU, Japan, Australia have no additional emergency duties
📌 VI. Common Mistakes & How to Avoid Them (Real-World Cases)
❌ Mistake 1: Using 3906.10.00.00 for thermoformed acrylic sheet
👉 Result: Customs rejects → reclassification, penalty, 41.3% tax + interest
❌ Mistake 2: Labeling as "plastic sheet" without specifying acrylic
👉 Result: Misclassified as 3921.19.00.90 → 41.5% instead of 41.0%
❌ Mistake 3: Not providing test report for material
👉 Result: Customs delays → $5K+ in demurrage fees
❌ Mistake 4: Using 3921.90.50.50 for acrylic sheet
👉 Result: False claim → penalty + audit
✅ Correct Way:
“Acrylic Plastic Thermoforming Sheet, Polymethyl Methacrylate (PMMA), 2mm thick, 1200x1800mm, uncut, uncoated, for signage use”
🎯 VII. Final Verdict: Accuracy = Profit
🔹 "Acrylic ≠ Plastic" — Know the difference!
🔹 "Sheet ≠ Formed" — Don’t use primary form code for thermoformed!
🔹 "China origin = 41%+ tariff" — Plan ahead!
📣 Act Now: Avoid $10K+ in Unexpected Tariffs!
📞 Contact a customs broker + request HS Code pre-ruling
🚀 Submit test reports + product specs + photos
💼 Get your code confirmed before shipment!
✨ Pro Tip:
If your acrylic sheet is originating from Vietnam, Mexico, or Thailand, you may qualify for IEEPA exemption → 0% additional duty!
📌 Your Product. Your Risk. Your Cost.
🎯 Precise HS Code = Smooth Clearance = Profit Protection!
🔐 Professional Customs, One Code at a Time.
💼 Don’t let a wrong HS Code sink your margins!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。