blue non foam rubber sheet
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 4008210000 | 35.0% | CN | US | 官方文档 |
| 4008292000 | 37.9% | CN | US | 官方文档 |
商品图片
AI分析
🔵 Blue Non-Foam Rubber Sheet: HS Code Classification & Customs Clearance Guide 2026
🌐 HS Code Reference & Customs Clearance Strategy | Vulcanized Non-Cellular Rubber | Professional Clearance Insights 📌 I. Product Definition & Classification: What is a "Blue Non-Foam Rubber Sheet"?
A "Blue Non-Foam Rubber Sheet" refers to vulcanized rubber products that are solid (non-cellular) and not hard rubber (eureta vulcanized). The color "Blue" is an aesthetic or identification feature and does not change the fundamental chemical classification, but it helps distinguish it from other rubber types in inventory.
In international trade, this product falls under Chapter 40: Rubber and articles thereof. The key distinction lies in whether it is cellular (foamed/spongy) or non-cellular (solid/dense). Since the input specifies "Non foam," it is classified as Non-cellular rubber.
⚠️ Key Classification Logic:
- If it is solid/dense → It is Non-cellular rubber → Look at 4008.
- If it is foamed/spongy → It is Cellular rubber → Look at 4008.19 (Not applicable here).
- If it is Hard Rubber → It is excluded from 4008 → Look at 4002/4003 (Not applicable here).
📦 II. HS Code Classification Details (2026 Latest Tariff Schedule)
Based on the input data, the product is split into two potential sub-categories depending on the shape/processing of the rubber.
| HS Code | Product Description | Applicable Scenario | Shape/Format |
|---|---|---|---|
4008.21.00.00 |
Plates, sheets, and strip of non-cellular vulcanized rubber | Standard flat sheets, large rolls of rubber sheeting, rectangular plates | ✅ Plates, Sheets, Strip |
4008.29.20.00 |
Profile shapes of non-cellular vulcanized rubber (Other) | Custom-extruded profiles, molded shapes with complex cross-sections (not simple sheets/strips) | ✅ Profile Shapes |
🔍 Critical Distinction:
-4008.21.00.00is the most common code for standard rubber sheets and strips used for gaskets, mats, or industrial linings.
-4008.29.20.00is reserved for Profile Shapes (e.g., extruded seals, complex molded parts) that do not fit the simple "sheet/strip" definition.
- If your "Blue Sheet" is a simple flat sheet, it almost certainly belongs to4008.21.00.00.
- If it is a complex extruded profile (e.g., a D-shape seal), it may fall under4008.29.20.00.
💰 III. 2026 Tariff Rate Breakdown (Including Surtaxes & Policy Surcharges)
✅ Applicable Country: USA (US)
✅ Origin: China (CN) (Assumed based on typical context; adjust if origin is different)
✅ Effective Date: 2026 Tariff Schedule
🎯 1. 4008.21.00.00 —— Rubber Plates, Sheets, Strip (Non-Cellular)
| Item | Content |
|---|---|
| Base Tariff | 0.0% (ad valorem) |
| Section 301 Surtax | +25.0% |
| IEEPA Surtax | Not listed in provided data for this specific HS, but typically 0% or included in Section 301 depending on specific USITC rulings. However, the provided data explicitly states "Total Tax: 25.0%". |
| Total Tax Rate | 25.0% |
| Tax Calculation | CIF Value × 25% |
| De Minimis Eligibility | ❌ No (Deny de minimis for goods subject to 301 tariffs) |
| Legal Basis Path | USITC:4008.21.00.00 → FOOTNOTE:301.88.01 (Section 301) |
📌 Explanation:
- Base Rate 0%: Rubber sheets are generally low-tariff items under normal trade.
- 25% Surtax: This is the standard Section 301 tariff for many rubber products from China.
- Total 25%: The provided data confirms the total effective rate is 25%.
- Risk: High audit risk if misclassified as "Plastic Sheets" (which may have different rates).
🎯 2. 4008.29.20.00 —— Other Profile Shapes (Non-Cellular)
| Item | Content |
|---|---|
| Base Tariff | 0.0% (ad valorem) |
| Section 301 Surtax | +0.0% (As per provided data) |
| IEEPA Surtax | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value × 0% |
| De Minimis Eligibility | ✅ Potentially Yes (If total tax is 0%, de minimis may apply depending on volume/value, but check current rules) |
| Legal Basis Path | USITC:4008.29.20.00 → FOOTNOTE:301.88.02 (Exempt from certain 301 lists) |
📌 Explanation:
- 0% Total Tax: This is a significant cost advantage.
- Why 0%?: Some "Profile Shapes" or specific rubber goods are excluded from the 301 surtax list or have different tariff treatment.
- Caution: Ensure the product truly fits the definition of "Profile Shapes" (not sheets) to avoid misclassification penalties.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
✅ 1. Document Preparation Checklist (Must-Haves)
| Document | Required? | Description |
|---|---|---|
| ✅ Product Specification | ✔️ | Must clearly state: "Vulcanized Rubber," "Non-Cellular," "Solid," "Blue," "Material Type (e.g., NBR, EPDM, SBR)." |
| ✅ Physical Samples | ✔️ | Customs may request samples to verify it is not cellular (foam). |
| ✅ Commercial Invoice | ✔️ | Must specify "Rubber Sheet/Profile," not generic "Plastic Sheet." |
| ✅ Packing List | ✔️ | Indicate weight, dimensions, and quantity. |
| ✅ Certification | ✔️ | If used for food contact or medical, provide FDA/LFGB certs. |
✅ 2. Declaration Tips (Key Mnemonic)
🔥 "Solid is Non-Cellular, Foam is Cellular; Sheets are 4008.21, Profiles are 4008.29!"
| Scenario | Correct HS Code | Risk if Wrong |
|---|---|---|
| Standard flat blue rubber sheet | 4008.21.00.00 |
25% Tax |
| Extruded blue rubber seal/profile | 4008.29.20.00 |
0% Tax |
| Mistake: Calling a sheet a "profile" to get 0% tax | ❌ High Risk of Audit | Penalties + Back Taxes |
| Mistake: Calling a profile a "sheet" to simplify | ⚠️ Acceptable | You pay 25% instead of 0% (Cost increase, no penalty) |
✅ 3. Special Considerations
| Situation | Handling Advice |
|---|---|
| Color (Blue) | Does not affect HS Code. Do not declare as "Blue Plastic" or "Blue Rubber Mat" without specifying material. |
| Hardness | If extremely hard (e.g., ebonite), it may be "Hard Rubber" and excluded from 4008. Verify it is vulcanized rubber other than hard rubber. |
| Composition | If mixed with other materials (e.g., fabric backing), it may fall under Chapter 59 or 63. Ensure it is pure rubber for 4008. |
🌍 V. Global Market Comparison (2026)
| Country/Region | Recommended HS Code | Tariff Rate | Notes |
|---|---|---|---|
| 🇺🇸 USA | 4008.21.00.00 |
25% | Section 301 Surtax applies. |
| 🇺🇸 USA | 4008.29.20.00 |
0% | Only if true "Profile Shape." |
| 🇨🇳 China | 4008.21.00.00 |
~5-10% | Import duty varies by origin. |
| 🇪🇺 EU | 4008.21.00 |
~0-2% | Generally low duty for rubber sheets. |
| 🇬🇧 UK | 4008.21.00 |
~0-2% | Post-Brexit tariff follows similar structure. |
📌 Conclusion:
- USA is the highest cost market for standard rubber sheets due to the 25% surtax.
- Profile shapes offer a tax loophole (0%) but must be strictly defined as "Profiles."
- Other markets (EU/UK) have significantly lower tariffs, making them more competitive for Chinese rubber exports.
📌 VI. Common Mistakes & Pitfall Guide (Lessons Learned)
❌ Mistake 1: Declaring "Blue Rubber Sheet" as "Plastic Sheet" (HS 3920)
👉 Consequence: Customs will reclassify to 4008 and assess 25% tax + penalties.
👉 Why: Rubber and Plastic have different chemical structures.
❌ Mistake 2: Using 4008.29.20.00 (0% tax) for a standard flat sheet
👉 Consequence: Audit triggered. Back taxes of 25% + interest.
👉 Why: "Sheet" ≠ "Profile." Profiles have specific cross-sectional shapes.
❌ Mistake 3: Ignoring "Non-Cellular" vs. "Cellular"
👉 Consequence: Wrong HS Code entirely. Cellular rubber (foam) is 4008.19.
👉 Why: Foam rubber has different physical properties and uses.
✅ Correct Declaration Example:
"Blue Vulcanized Non-Cellular Rubber Sheet, Material: EPDM, Thickness: 5mm, Width: 1m, Use: Industrial Gasket."
HS Code:4008.21.00.00
🎯 VII. Conclusion: Professional Declaration, Cost Optimization!
🎯 Remember the Golden Rules:
🔹 "Flat Sheet = 4008.21 (25% Tax in US)"
🔹 "True Profile = 4008.29 (0% Tax in US)"
🔹 "Foam = 4008.19 (Different Code)"
🔹 "Hard Rubber = Not 4008"
📌 Pro Tip:
If you are importing standard rubber sheets into the US, budget for 25% additional cost.
If you are exporting custom rubber profiles, verify if they qualify as "Profile Shapes" to potentially enjoy 0% duty under 4008.29.20.00.
📣 Immediate Action:
📞 Consult a Customs Broker to confirm if your "blue sheet" can be classified as a "Profile" if it has any edge shaping.
🚀 Optimize Your Supply Chain: For US-bound rubber sheets, consider Country of Origin Planning (e.g., sourcing from non-China origins to avoid 25% surtax).
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent of Tax Saved is Pure Profit!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。