drying pad
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 4016910000 | 37.7% | CN | US | 官方文档 |
| 4016990500 | 20.9% | CN | US | 官方文档 |
| 3924901050 | 13.3% | CN | US | 官方文档 |
| 3924104000 | 13.4% | CN | US | 官方文档 |
| 7323999080 | 88.4% | CN | US | 官方文档 |
商品图片
AI分析
🍽️ Drying Pad / Silica Gel Draining Mat (Silicone Kitchen Mat)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy 📌 One, Product Definition & Classification: Do You Really Know the "Drying Pad"?
The Drying Pad (often made of silicone, silica gel, or synthetic resin) is a common household item used in kitchens and bathrooms to drain water from dishes, fruits, vegetables, or utensils. In international trade, its classification depends heavily on its material composition and specific form/function.
Silicone Rubber Mats: If made of vulcanized rubber/silicone, it falls under Chapter 40. Plastic/Synthetic Resin Mats: If made of hard or soft plastic, it falls under Chapter 39. Metal Mats: If made of stainless steel or iron (rare for "silica gel" description, but possible for "draining racks"), it falls under Chapter 73.
⚠️ Key Distinction Point: - If it is flexible, heat-resistant, and made of silicone/elastomer → HS 4016 (Rubber Goods) - If it is rigid or semi-rigid plastic/synthetic resin → HS 3924 (Plastic Tableware/Household Articles) - If it is metal mesh/structure → HS 7323 (Iron/Steel Articles)
📦 Two, HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data for "Drying Pad", here are the five potential HS Codes and their corresponding tax profiles.
| HS Code | Product Description | Material/Form | Applicability |
|---|---|---|---|
4016.91.00.00 |
Silicone Draining Mat (Vulcanized Rubber) | Rubber/Elaster | Flexible mats, heat-resistant silicone pads |
4016.99.05.00 |
Other Household Articles (Vulcanized Rubber) | Rubber/Elaster | Other non-specified rubber household items |
3924.90.10.50 |
Plastic/Tableware Mat (Synthetic Resin) | Plastic/Resin | General plastic draining mats, synthetic materials |
3924.10.40.00 |
Household Use Articles (Plastic) | Plastic/Synthetic | Specific plastic household draining pads |
7323.99.90.80 |
Kitchen Draining Pad (Iron/Steel) | Steel/Aluminum/Copper | Note: Only applies if metal, NOT silicone |
🔍 Critical Note: - Most "Silica Gel" (Silicone) drying pads are misclassified. If the material is silicone (elastomer), it MUST be classified under Chapter 40 (
4016.xx.xx), NOT Chapter 39 (Plastics). - Misclassifying Silicone (4016) as Plastic (3924) can lead to customs audits, penalties, and underpayment of duties. - HS 7323 is included for completeness but is unlikely for "silica gel" products. It carries the highest tax burden.
💰 Three, 2026 Latest Tariff Rate Breakdown (Including Additional Taxes & Policy Surcharges)
✅ Applicable Country: United States (US) ✅ Origin: China (CN) ✅ Effective Time: 2025/2026 Import Period
🎯 1. 4016.91.00.00 —— Silicone Rubber Mat (Vulcanized Rubber)
| Item | Content |
|---|---|
| Base Tariff | 2.7% |
| Section 301 Surcharge | +25.0% |
| Section 122 Surcharge | +10.0% |
| Total Tax Rate | 37.7% |
| Tax Calculation | CIF Value × 37.7% |
| De Minimis Exemption | ❌ Not Eligible (High tax rate usually excludes $800 de minimis benefit in strict interpretations, or high duty makes it financially unviable) |
| Legal Basis Path | Section 301 + Section 122 + USITC:4016.91.00.00 |
📌 Explanation: - This is the standard classification for silicone mats. - The total tax of 37.7% is significant. The 25% Section 301 tariff is the main driver. - Strategy: Verify if the product qualifies for any exclusions (check USTR exclusion lists for HS 4016.91.00.00).
🎯 2. 4016.99.05.00 —— Other Household Rubber Articles
| Item | Content |
|---|---|
| Base Tariff | 3.4% |
| Section 301 Surcharge | +7.5% |
| Section 122 Surcharge | +10.0% |
| Total Tax Rate | 20.9% |
| Tax Calculation | CIF Value × 20.9% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | Section 301 (Footnote for this subheading) + Section 122 + USITC:4016.99.05.00 |
📌 Note: - This rate is much lower (20.9%) than
4016.91.00.00. - Risk: Customs may reclassify a standard silicone mat as4016.91if it’s a "mat," arguing it fits the "mats" definition in91.00. Use this code only if the product doesn't fit "mats" but is still a rubber household item.
🎯 3. 3924.90.10.50 —— Plastic/Synthetic Resin Household Mat
| Item | Content |
|---|---|
| Base Tariff | 3.3% |
| Section 301 Surcharge | 0.0% |
| Section 122 Surcharge | +10.0% |
| Total Tax Rate | 13.3% |
| Tax Calculation | CIF Value × 13.3% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | Section 122 + USITC:3924.90.10.50 |
📌 Explanation: - This is the LOWEST tax rate for plastic-based products. - CRITICAL WARNING: You can ONLY use this code if the product is NOT Silicone. It must be classified as "Plastic" or "Synthetic Resin." - If you mislabel Silicone as Plastic (
3924) to save tax, Customs will demand back taxes + penalties (37.7% - 13.3% = 24.4% difference + fines).
🎯 4. 3924.10.40.00 —— Other Plastic Household Articles
| Item | Content |
|---|---|
| Base Tariff | 3.4% |
| Section 301 Surcharge | 0.0% |
| Section 122 Surcharge | +10.0% |
| Total Tax Rate | 13.4% |
| Tax Calculation | CIF Value × 13.4% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | Section 122 + USITC:3924.10.40.00 |
📌 Note: - Very similar to
3924.90.10.50(13.4% vs 13.3%). - Also Plastic-only. Ensure material certificates support "Plastic/Synthetic" not "Silicone/Elastomer."
🎯 5. 7323.99.90.80 —— Iron/Steel Kitchen Articles
| Item | Content |
|---|---|
| Base Tariff | 3.4% |
| Section 301 Surcharge | +25.0% |
| Section 122 Surcharge | +10.0% |
| Section 122 (Metal Surcharge) | +50.0% (Additional for Steel/Aluminum/Copper) |
| Total Tax Rate | 88.4% |
| Tax Calculation | CIF Value × 88.4% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | Section 301 + Section 122 (Metal) + USITC:7323.99.90.80 |
📌 Warning: - This rate is EXTREMELY HIGH (88.4%). - This applies ONLY if the drying pad is made of Stainless Steel, Iron, Aluminum, or Copper. - If your product is Silicone or Plastic, DO NOT use this code.
🛠️ Four, Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
✅ 1. Material Certification is King (Mandatory)
| Document | Must Provide | Purpose |
|---|---|---|
| ✅ Material Safety Data Sheet (MSDS) / TDS | ✔️ | Proves if it is Silicone (Rubber) or Plastic. |
| ✅ Composition Statement | ✔️ | Explicitly state: "100% Food-Grade Silicone" or "Polypropylene Plastic." |
| ✅ Product Photos | ✔️ | Show texture, flexibility, and any branding. |
| ✅ FDA Compliance Report | ✔️ | For food-contact items (drying mats are food contact). |
| ✅ Commercial Invoice | ✔️ | Accurate description matching HS Code. |
| ✅ Packing List | ✔️ | Weight and dimensions. |
🔥 Golden Rule: "Silicone = Rubber (4016); Plastic = Plastic (3924). Never mix them!"
✅ 2. Declaration Tips (Key Mantra)
| Scenario | Correct Declaration | Wrong Action |
|---|---|---|
| Silicone Mat | Silicone Drying Mat, Food Grade, Heat Resistant → HS 4016.91.00.00 |
Declare as "Plastic Mat" → Audit Risk |
| Plastic Mat | Plastic Draining Mat, PP Material → HS 3924.90.10.50 |
Declare as "Rubber Mat" → Overpay Tax |
| Metal Rack | Stainless Steel Draining Rack → HS 7323.99.90.80 |
None (High tax unavoidable) |
✅ 3. Special Situation Handling
| Situation | Handling Suggestion |
|---|---|
| Mixed Materials | If the mat has a silicone top and a plastic base, consult customs. Usually, the dominant material or principal function determines the code. Often, silicone top → Chapter 40. |
| OEM/Private Label | Ensure the supplier’s material certificate matches your declared HS Code. |
| De Minimis ($800) Strategy | Due to high tariffs (13%–88%), De Minimis exemption is often not worth it if the duty exceeds the value of the exemption. For shipments >$800, proper entry is required. For < $800, check if the carrier accepts high-duty items under de minimis (some carriers block it). |
| Section 122 & 301 Exclusions | Check the latest USTR exclusion lists for HS 4016 and 3924. Some specific types of silicone mats may have exclusions. |
🌍 Five, Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Total Tax (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 4016.91.00.00 (Silicone) |
37.7% | FDA + Prop 65 | High tax due to Sec 301 + Sec 122 |
| 🇺🇸 USA | 3924.90.10.50 (Plastic) |
13.3% | FDA + Prop 65 | Lower tax, but only for plastic |
| 🇨🇳 China | 4016.91.00.00 |
~2.7% | CCC (if applicable) | No Section 301/122 |
| 🇪🇺 EU | 4016.91 |
4.2% | REACH + LFGB | No US-style surcharges |
| 🇬🇧 UK | 4016.91 |
4.2% | UKCA + LFGB | Post-Brexit rules apply |
📌 Conclusion: - USA is the most complex market for drying pads due to multiple surcharges. - Silicone (4016) is taxed heavily (37.7%). - Plastic (3924) is cheaper (13.3%), but material must be verified.
📌 Six, Common Errors & Pitfalls (Lessons Learned)
❌ Error 1: Declaring Silicone as Plastic (3924) to save tax.
👉 Consequence: Customs audit → Back taxes (24.4% difference) + Fines + Potential seizure.
❌ Error 2: Using HS 7323 for Silicone Mats. 👉 Consequence: 88.4% Tax! Unnecessary financial loss.
❌ Error 3: Ignoring Section 122 (10%) and Section 301 (25% or 7.5%). 👉 Consequence: Underpayment → Delays + Penalties.
✅ Correct Practice:
"Silicone Drying Mat, Food Grade, Heat Resistant up to 230°C, Model XYZ, FDA Compliant" → HS 4016.91.00.00 → Total Tax: 37.7%
🎯 Seven, Conclusion: Professional Declaration Saves Money!
🎯 Remember the Mantra:
🔹 "Silicone is Rubber (4016), Plastic is Plastic (3924)." 🔹 "Check Material First, Then Choose Code." 🔹 "37.7% for Silicone, 13.3% for Plastic (in US)."
📌 Tips: - If your product is 100% Silicone, accept the 37.7% rate or seek an exclusion. - If your product can be made of Plastic, consider switching material to save 24.4% in duties (if quality allows). - Always keep Material Certificates ready for customs inspection.
📣 Immediate Action:
📞 Contact your supplier for MSDS/Composition Report. 🚀 Confirm HS Code with a licensed US Customs Broker BEFORE shipment.
✨ Professional Clearance Starts with Accurate Classification! 💼 Every cent of duty counts!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。