feeder
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 7323999040 | 88.4% | CN | US | 官方文档 |
| 3926305000 | 22.8% | CN | US | 官方文档 |
| 6911900050 | 22.9% | CN | US | 官方文档 |
| 6911108090 | 38.3% | CN | US | 官方文档 |
| 7323999080 | 88.4% | CN | US | 官方文档 |
商品图片
AI分析
🐾 Pet Feeder (宠物喂食器)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Know What a "Feeder" Is?
A Pet Feeder is a device designed to dispense food for domestic animals (primarily cats and dogs). In international trade, the Harmonized System (HS) classification heavily depends on the material composition of the feeder. There is no single "universal" HS code for feeders; instead, they are categorized by material logic.
Key Distinction Points:
- If the feeder is made of Plastic, it falls under Chapter 39.
- If the feeder is made of Metal (Steel, Aluminum, Copper), it falls under Chapter 73.
- If the feeder is made of Ceramics/Porcelain, it falls under Chapter 69.
⚠️ Critical Warning for Importers:
- The tariff rates vary drastically (from ~22% to ~88%) based on material.
- Metal feeders are subject to aggressive anti-dumping and Section 301 tariffs in the US, leading to some of the highest total tax rates.
- Plastic and Ceramic options offer significantly lower tariff burdens.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Match)
Based on the inferred material of the pet feeder, here are the four most likely HS Code classifications:
| HS Code | Material Inference | Product Description & Logic | Total Tax Rate |
|---|---|---|---|
| 3926.30.50.00 | Plastic 🟢 | "Other塑料制品" (Plastic Products): Fits the "catch-all" category for other plastic articles. Feeders are predominantly plastic. | 22.8% |
| 6911.90.00.50 | Ceramic/Porcelain 🟢 | "Other Ceramics": Deduced material is porcelain. Classified as other vessels for household/pet use. No logical conflict with "Other" categories. | 22.9% |
| 6911.10.80.90 | Porcelain/Earthenware 🟡 | "Kitchenware/Household Ceramics": Inferred material is porcelain or pottery. Form and use have no obvious conflicts. | 38.3% |
| 7323.99.90.40 | Metal 🔴 | "Metal Articles": Deduced material is metal. Used for pet feeding. Acts as a catch-all for non-specific categories. | 88.4% |
| 7323.99.90.80 | Metal 🔴 | "Kitchen/Household Metal Items": Based on catch-all principles, tends to determine a case with no obvious material conflict. | 88.4% |
🔍 Key Insight:
- Plastic (3926.30.50.00) and Standard Ceramic (6911.90.00.50) are the most cost-effective options for US import due to lower total tax rates (~22-23%).
- Metal (7323.99.90.40/80) incurs the highest burden (~88.4%) due to specific Section 122 tariffs on steel, aluminum, and copper products.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: 2025/2026 (Includes subsequent imports)
🎯 1. 3926.30.50.00 — Plastic Pet Feeder (Most Common)
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| Section 301 Surcharge | +7.5% |
| Section 122 Surcharge | +10% |
| Total Tax Rate | 22.8% |
| Tax Calculation | CIF Value × 22.8% |
| De Minimis Exemption | ❌ Not Applicable (High value risk) |
| Legal Path | USITC:3926.30.50.00 → SEC301 → SEC122 |
📌 Explanation:
- This is the most favorable option for plastic feeders.
- The 10% Section 122 tariff applies to certain plastic articles, but the overall rate remains manageable compared to metal.
🎯 2. 6911.90.00.50 — Ceramic/Porcelain Pet Feeder
| Item | Content |
|---|---|
| Base Tariff | 5.4% |
| Section 301 Surcharge | +7.5% |
| Section 122 Surcharge | +10% |
| Total Tax Rate | 22.9% |
| Tax Calculation | CIF Value × 22.9% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Path | USITC:6911.90.00.50 → SEC301 → SEC122 |
📌 Note:
- Very similar to the plastic tariff.
- Suitable for premium, heavy-duty ceramic feeders.
🎯 3. 6911.10.80.90 — Porcelain/Kitchenware Feeder
| Item | Content |
|---|---|
| Base Tariff | 20.8% |
| Section 301 Surcharge | +7.5% |
| Section 122 Surcharge | +10% |
| Total Tax Rate | 38.3% |
| Tax Calculation | CIF Value × 38.3% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Path | USITC:6911.10.80.90 → SEC301 → SEC122 |
📌 Warning:
- This code is for specific porcelain/kitchenware items with higher base tariffs.
- Avoid if possible unless the product is distinctly "kitchenware" rather than general "household plastic/ceramic."
🎯 4. 7323.99.90.40 / 7323.99.90.80 — Metal Pet Feeder (Steel/Aluminum/Copper)
| Item | Content |
|---|---|
| Base Tariff | 3.4% |
| Section 301 Surcharge | +25.0% |
| Section 122 Surcharge | +10% |
| Special Surcharge | Steel/Aluminum/Copper: +50% |
| Total Tax Rate | 88.4% |
| Tax Calculation | CIF Value × 88.4% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Path | USITC:7323.99.90.40 → SEC301 → SEC122 → SEC122_METAL |
📌 Critical Alert:
- This is the highest tax category.
- The 50% surcharge on Steel, Aluminum, and Copper products is the primary driver.
- Even though the base tariff is low (3.4%), the additive taxes push the total to nearly 88.4%.
- Recommendation: Do NOT import metal feeders from China to the US unless you have a specific exemption or alternative origin (e.g., Vietnam, Mexico).
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
✅ 1. Material Declaration is Key
| Material | Recommended HS Code | Tax Rate | Clearance Tip |
|---|---|---|---|
| Plastic | 3926.30.50.00 |
22.8% | Clearly state "Plastic Pet Feeder" in invoice. Avoid vague terms like "Feeder." |
| Ceramic | 6911.90.00.50 |
22.9% | Specify "Porcelain" or "Ceramic." Provide material safety certs (lead-free). |
| Metal | 7323.99.90.40 |
88.4% | High Risk. Consider alternative materials. If must import, prepare for high duties. |
✅ 2. Declaration Best Practices
🔥 Golden Rule:
"Material First, Use Second. Don't Guess the Code!"
| Scenario | Correct Declaration | Error Consequence |
|---|---|---|
| Plastic Feeder | Plastic Pet Feeder, Model XYZ, 3926.30.50.00 |
Low risk, low tax |
| Ceramic Feeder | Ceramic Pet Feeder, Model XYZ, 6911.90.00.50 |
Low risk, low tax |
| Metal Feeder | Stainless Steel Pet Feeder, Model XYZ, 7323.99.90.40 |
88.4% Tax! |
| Mixed Materials | Separate by Material | Mixed claims lead to audit delays |
✅ 3. Special Situation Handling
| Situation | Handling Advice |
|---|---|
| Multi-Material Feeder | If a feeder has a plastic bowl and metal stand, split the shipment or declare the main material (usually the bowl). Consult a customs broker. |
| OEM Custom Feeder | Provide design drawings to prove material composition. |
| Electronic Auto-Feeder | If it has electronic components, it might fall under different chapters (e.g., 8543). Contact a specialist. |
| Origin Transshipment | If metal feeders are assembled in Vietnam/Mexico, you may avoid Section 122 metal surcharges. Verify rules of origin. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code (Plastic) | Tariff (China Origin) | Key Certs | Note |
|---|---|---|---|---|
| 🇺🇸 USA | 3926.30.50.00 |
22.8% | FCC (if electronic), CPSIA | High tax on Metal (88.4%) |
| 🇨🇳 China | 3926.30.50.00 |
5.0% | CCC (if applicable) | Low import duty |
| 🇪🇺 EU | 3926.90.97 |
4.5% | CE, REACH | No Section 301/122 |
| 🇦🇺 Australia | 3926.90.90 |
5.0% | SAA | No special surcharges |
| 🇯🇵 Japan | 3926.30.00 |
0-8% | PSE (if electronic) | Generally low tariffs |
📌 Conclusion:
- USA is the most expensive market for pet feeders due to Section 301 and Section 122 tariffs.
- Plastic and Ceramic are the only viable material choices for US import from China to keep taxes under 25%.
- Metal feeders are financially unviable for direct import to the US from China without significant margin protection.
📌 VI. Common Mistakes & Pitfall Guide (Blood & Tears Lessons)
❌ Mistake 1: Declaring a Metal Feeder as 9618.00 (Clothing Accessories)
👉 Consequence: Customs rejects it. Re-classified to 7323 → 88.4% tax + penalties!
❌ Mistake 2: Ignoring the Section 122 10% Surcharge on plastics/ceramics
👉 Consequence: Underpaying duties. Expected 22.8%, paid 12.8%. Back taxes + interest.
❌ Mistake 3: Combining Plastic and Metal parts into one HS Code
👉 Consequence: Customs may seize the whole shipment for misclassification. Split shipment recommended.
❌ Mistake 4: Not checking for Electronic Components
👉 Consequence: If the feeder has a timer/motor, it might be 8543 or 8509. Consult a specialist.
✅ Correct Action:
"Pet Feeder, Plastic, Manual, 2L Capacity, Model ABC, HS Code 3926.30.50.00"
"Pet Feeder, Ceramic, Dishwasher Safe, Model DEF, HS Code 6911.90.00.50"
🎯 VII. Conclusion: Professional Classification, Save Money, Clear Customs Smoothly!
🎯 Remember the Mantra:
🔹 "Plastic & Ceramic are Safe (~23%)!
🔹 Metal is Dangerous (~88%)!
🔹 Declare Material Clearly, Avoid Surprises!"
📌 Pro Tip:
If your product is an Automatic Electronic Feeder, it may fall under Chapter 85 (Electrical machinery).
- Base Tariff: ~0-5%
- Section 301: +25%
- Section 122: +10%
- Total: ~35-40%
Consult a specialist for electronic feeders!
📣 Immediate Action:
📞 Contact a Professional Customs Broker + Provide Product Photos + Request Advance Ruling
🚀 Let Your Pet Feeder Clear Customs Smoothly, Keep Costs Low, and Maximize Profits!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Penny of Duty Costs, Calculated Precisely!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。