general plastic hose
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3917390050 | 38.1% | CN | US | 官方文档 |
| 3917310000 | 38.1% | CN | US | 官方文档 |
| 3917290050 | 38.1% | CN | US | 官方文档 |
| 3917320020 | 38.1% | CN | US | 官方文档 |
| 3917330000 | 38.1% | CN | US | 官方文档 |
商品图片
AI分析
🌊 General Plastic Hose (Plastic Tubing & Hoses)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Full Analysis | Professional-Level Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "General Plastic Hose"?
General Plastic Hoses are flexible or rigid tubes made of plastic, used for conveying liquids, gases, or granular materials in industrial, agricultural, and household applications. In international trade, they are primarily classified under Chapter 39 (Plastics and Articles Thereof), specifically Heading 3917.
The classification depends on three key factors: 1. Material Composition: PVC, PE, PP, etc. 2. Form/Rigidity: Rigid pipe vs. Flexible hose/tube. 3. Reinforcement: Whether it has metallic or other non-plastic reinforcement (which would change the HS code entirely).
⚠️ Key Distinction Points:
- If it is flexible and made of plastic → Typically 3917.39 or 3917.31/32/33.
- If it is rigid (pipe) → Typically 3917.29.
- If it contains metal reinforcement → It may NOT be classified under 3917 but under 8481 or other headings depending on function. Note: The data provided below assumes purely plastic hoses without metal reinforcement.
📦 II. HS Code Classification Details (2026 Latest Tariff Authoritative对照)
| HS Code | Product Description | Material/Form | Applicable Scenarios |
|---|---|---|---|
3917.39.00.50 |
Plastic High-Pressure Hose, material: plastic, form: hose | Plastic / Flexible | High-pressure fluid transfer, hydraulic lines, industrial suction/discharge hoses. |
3917.31.00.00 |
Plastic Hose, material: plastic, form: hose | Plastic / Flexible | General-purpose plastic tubing, garden hoses, low-pressure fluid conveyance. |
3917.29.00.50 |
Plastic Rigid Hose (Pipe), material: plastic, form: rigid pipe | Plastic / Rigid | Construction piping, drainage, irrigation main lines (rigid tubes). |
3917.32.00.20 |
Plastic PE Hose, material: PE (Polyethylene), form: hose | PE / Flexible | Water supply lines, gas pipelines (flexible), chemical resistance applications. |
3917.33.00.00 |
Plastic PE Hose, material: PE (Polyethylene), form: hose | PE / Flexible | Similar to above; often distinguished by specific sub-classification for PE hoses in certain trade zones. |
🔍 Important Reminder:
- Rigid vs. Flexible: HS Code 3917.2x is for rigid tubes/pipes. HS Code 3917.3x is for flexible hoses/tubes. Do not confuse "rigid hose" (which doesn't exist) with "rigid pipe." - Material Specifics: PE (Polyethylene) hoses have specific sub-headings (3917.32/33). If the material is not specifically PE or PVC, it often falls under 3917.39 (Other). - High-Pressure: If the hose is designed for high pressure, customs may scrutinize whether it fits 3917.39.00.50 specifically, depending on local tariff nomenclature definitions.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Surcharges)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: 2025-11-10 onwards (including subsequent imports)
🎯 1. All General Plastic Hoses (HS Codes: 3917.29, 3917.31, 3917.32, 3917.33, 3917.39)
| Item | Content |
|---|---|
| Base Tariff Rate | 3.1% (Ad Valorem) |
| Section 301 Surtax | +25.0% (From USITC Footnote for Chinese Imports) |
| Section 122 Surtax | +10.0% (Specific surcharge on certain plastic products) |
| Total Tariff Rate | 38.1% |
| Tax Calculation | CIF Value × 38.1% |
| De Minimis Exemption Eligible? | ❌ NO (deny_de_minimis) |
| Legal Basis Path | Base Tariff: 3.1% → 301 Tariff: 25.0% → 122 Tariff: 10.0% |
📌 Explanation:
- "Base Tariff 3.1%": Standard MFN (Most Favored Nation) duty for plastic hoses under Chapter 39.
- "Section 301 Tariff 25%": The major penalty tariff imposed on Chinese goods under US Trade Act Section 301.
- "Section 122 Tariff 10%": An additional surcharge applied to specific plastic products (including hoses) under Section 122 of the Trade Expansion Act.
- Total 38.1%: This is a very high combined rate. Importers must account for this in their cost structure.
- No De Minimis: These items are explicitly excluded from the $800 de minimis exemption, meaning all shipments, regardless of value, are subject to customs clearance and duty payment.
🛠️ IV. Customs Clearance Practical Advice (实战避坑指南)
✅ 1. Required Document Checklist (Must-Haves)
| Document | Mandatory | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must specify material (PE, PVC, etc.), diameter, wall thickness, pressure rating. |
| ✅ Material Safety Data Sheet (MSDS) | ✔️ | If used for chemical conveyance, proves chemical compatibility. |
| ✅ Commercial Invoice | ✔️ | Clearly state "Plastic Hose" and HS Code. Avoid vague terms like "Tubing." |
| ✅ Packing List | ✔️ | Detail net/gross weight, number of rolls/lengths. |
| ✅ Original Proof of Origin | ✔️ | Essential for confirming China origin (and thus applying the 38.1% rate). |
| ✅ Third-Party Test Report | ✔️ | For pressure ratings, especially for "High-Pressure" claims (3917.39.00.50). |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Material First, Flexibility Second, Pressure Third!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| PE Hose | 3917.32.00.20 or 3917.33.00.00 |
Misdeclare as "PVC Hose" → Wrong HS, potential audit. |
| Rigid Plastic Pipe | 3917.29.00.50 |
Declare as "Hose" → Misclassification, penalty. |
| High-Pressure Hose | 3917.39.00.50 |
Declare as "General Hose" → May still be correct, but ensure pressure specs are visible. |
| Metal-Reinforced Hose | NOT 3917 | Declare as Plastic Hose → Major Misclassification, severe fines. |
✅ 3. Special Situation Handling
| Situation | Handling Advice |
|---|---|
| Mixed Containers | If one container has plastic hoses + metal valves, valves may be classified separately. Ensure clear separation in packing list. |
| "High-Pressure" Claim | Customs may request test reports to verify if it truly qualifies for 3917.39.00.50 (if specific sub-category exists in your jurisdiction). |
| Re-exported Goods | If goods transited through Vietnam/Mexico, provide full chain of custody. China origin remains key for surtaxes unless substantial transformation occurred. |
| Sample Shipments | Even samples are subject to 38.1% duty. Do not use "Free Sample" to evade declaration. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3917.39.00.50 (etc.) |
38.1% | No specific (except FDA if for food/water) | Highest duty due to 301+122. |
| 🇨🇳 China | 3917.39.00 |
3.1% (Import) | CCC (if applicable) | Low duty for import into China. |
| 🇪🇺 EU | 3917.23/3917.29 |
4.0% - 6.5% | CE (if applicable) | No Section 301 equivalent. |
| 🇦🇺 Australia | 3917.23/3917.39 |
5.0% | G-Mark | Standard import duty. |
| 🇯🇵 Japan | 3917.23/3917.39 |
6.0% | JIS | No surtaxes. |
📌 Conclusion:
- USA is the most expensive market due to the cumulative 38.1% tariff.
- EU, Australia, Japan offer significantly lower duty rates (~4-6%).
- Strategy: Consider near-shoring (Mexico/Vietnam) if targeting the US, but verify origin rules strictly.
📌 VI. Common Mistakes & Pitfalls (Blood & Tears Lessons)
❌ Mistake 1: Declaring "Plastic Pipe" for "Flexible Hose"
👉 Consequence: Wrong HS Code (3917.29 vs 3917.39). While duty might be same in this data, it triggers manual review, delaying clearance by weeks.
❌ Mistake 2: Ignoring the "122 Clause"
👉 Consequence: If you only account for 301 (25%) and not 122 (10%), your cost projection is off by 10%. This can erase profit margins.
❌ Mistake 3: Using "De Minimis" for Small Batches
👉 Consequence: Customs will seize and fine. Plastic hoses are excluded from the $800 exemption. Pay the duty upfront.
❌ Mistake 4: Vague Description "Plastic Tubing"
👉 Consequence: Customs may classify it under a higher-duty general plastics category if material isn't specified.
✅ Correct Description:
"Flexible Plastic Hose, Made of Polyethylene (PE), Diameter 1 inch, for Water Conveyance, HS Code 3917.32.00.20"
🎯 VII. Conclusion: Precision in Classification Saves Money!
🎯 Remember the Mantra:
🔹 "38.1% is the Reality for US Imports."
🔹 "Rigid is 3917.2x, Flexible is 3917.3x."
🔹 "No De Minimis – Every Shipment Pays."
📌 Pro Tip:
If you are importing large volumes, apply for a Binding Tariff Ruling from US Customs and Border Protection (CBP) to confirm the specific HS Code for your exact product specifications. This protects you from retroactive duty assessments.
📣 Immediate Action:
📞 Engage a Licensed Customs Broker
📄 Prepare Detailed Product Specifications (Material, Pressure, Dimensions)
💰 Budget for 38.1% of CIF Value in duties for US Imports
🚀 Smooth Clearance, Accurate Costs, Profitable Trade!
✨ Professional Clearance Starts with Accurate Classification!
💼 Your Every Cent is Worth Precise Calculation!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。