man made fiber blend plastic/rubber gloves

🛡️ Man Made Fiber Blend Plastic/Rubber Gloves – HS Code & Tariff Guide (2026 Update)

🌐 HS Code Classification & Customs Clearance Strategy | 2026 Tariff Breakdown | Expert-Level Compliance Guide

📌 1. Product Definition & Classification: What Exactly Are These Gloves?

These are protective gloves made from a composite material: - Primary Material: Man-Made Fibers (e.g., polyester, nylon)
- Coating/Impregnation: Plastic or Rubber (e.g., PVC, latex, nitrile, rubber coating)

✅ Key Features: - Fabric base: Man-made fibers (not natural rubber or cotton) - Surface treatment: Coated, impregnated, or laminated with plastic or rubber - Use case: Industrial, medical, cleaning, chemical handling — high protection

⚠️ Critical Distinction: - If the glove is made of rubber (even with fiber blend), it falls under rubber gloves. - If the glove is made of man-made fiber fabric and coated with plastic/rubber, it belongs to textile-based gloves with plastic/rubber coating.

📦 2. HS Code Classification Breakdown (2026 Official Tariff Matrix)

🔍 Why Multiple Codes Apply?
- 6116.10.75.20 and 6216.00.26.00 are textile-based (man-made fiber fabric) with plastic/rubber coating → Lower tax - 4015.19.51.00 and 4015.19.11.50 are rubber-based, even if with fiber blend → Higher tax

💰 3. 2026 Tariff Rate Breakdown (U.S. Market, China Origin)

🎯 1. 6116.10.75.20 — Man-Made Fiber Gloves, Plastic/Rubber Coated

📌 Why This Rate?
- The primary material is man-made fiber (textile) → falls under textile gloves
- Coated with plastic/rubber → still qualifies under 6116.10.75.20
- No Section 301 tariff (not on the 301 list)
- Only 10% IEEPA 122 Clause applies

🎯 2. 6216.00.26.00 — Gloves of Man-Made Fibers, Coated/Impregnated

📌 Why Slightly Higher?
- Section 301 tariff applies (7.5%) due to China origin
- 122 Clause (IEEPA) applies to all Chinese-origin goods
- Base duty is lower (7%), but additional tariffs push total to 24.5%

🎯 3. 4015.19.51.00 — Rubber Gloves, Including Man-Made Fiber Blend

📌 Why So High?
- Classified as rubber gloves → Section 301 tariff applies (25%)
- 122 Clause (IEEPA) applies → 10%
- Base duty is 14%
- Total: 49% → Extremely high

⚠️ Warning: If the glove is rubber-coated, even on a man-made fiber base, it may be reclassified as rubber gloves → 49% tax

🎯 4. 4015.19.11.10 & 4015.19.11.50 — Vulcanized Rubber Gloves (Coated)

📌 Note:
- These are rubber gloves, even if coated with rubber
- Low base duty (3%), but 25% Section 301 + 10% IEEPA → 38% total

🛠️ 4. Customs Clearance Best Practices (Pro Tips)

✅ 1. Documentation Checklist (MUST-HAVE)

✅ 2.申报技巧（Key Tips）

🔥 "Textile Base = Lower Tax, Rubber Base = Higher Tax!"

📌 Pro Tip:
- Label the product clearly: "Gloves, Man-Made Fiber Base, PVC-Coated"
- Avoid words like "rubber glove" unless it's pure rubber
- Use "plastic/rubber coated" only if the base is textile

✅ 3. Special Cases & Risk Mitigation

🌍 5. Global Market Tariff Comparison (2026)

📌 Insight:
- U.S. is the only market with 301 + IEEPA tariffs
- China-origin goods face 23.2%–24.5% in U.S.
- EU/Japan/Australia offer clean, low-tax entry

📌 6. Common Mistakes & How to Avoid Them

❌ Mistake 1: Labeling as "Rubber Gloves" when base is man-made fiber
👉 Result: Tax jumps to 49% → Massive cost overrun

❌ Mistake 2: Not specifying coating material in invoice
👉 Result: Customs may assume rubber → 49% tax

❌ Mistake 3: Using 4015.19.51.00 for textile-based gloves
👉 Result: Overpayment, rejection, delay

✅ Correct Approach:

Use "Man-Made Fiber Gloves, Plastic-Coated"
Avoid words like "rubber" unless it's pure rubber
Provide material test reports

🎯 7. Final Verdict: Choose Your HS Code Wisely!

🔥 Best Strategy for China-Origin Goods: - Use 6116.10.75.20 or 6216.00.26.00
- Avoid 4015.19.51.00 at all costs
- Save 25%+ in tariffs
- Prevent 49% tax nightmare

📌 Golden Rule:

"If it's made of man-made fiber and coated — it's textile, not rubber!"

📣 Take Action Now!

📞 Contact a U.S.-licensed customs broker + request HS Code pre-ruling
🚀 Submit product specs, photos, and material reports
💼 Avoid costly reclassification, delays, and penalties

✨ Professional Classification = Smooth Clearance = Profit Protection!
💼 Your product’s tax rate is not set in stone — it’s in your hands!

📌 Pro Tip: If you’re exporting from Vietnam, Mexico, or Thailand, you may avoid 301 and IEEPA tariffs → Total tax drops to 13.2% or lower.

🚀 Ready to ship?

✅ Confirm HS Code
✅ Verify Material Composition
✅ Prepare Documentation
✅ Get Pre-Ruling

🔐 Your gloves are ready. Your tax is under control. Your business is protected.