plastic bracket 24
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 9032906180 | 36.7% | CN | US | 官方文档 |
| 9033009000 | 39.4% | CN | US | 官方文档 |
| 3926909989 | 22.8% | CN | US | 官方文档 |
| 3926305000 | 22.8% | CN | US | 官方文档 |
商品图片
AI分析
🖥️ Plastic Bracket 24 (Plastic Support/Bracket)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy for US Imports 📌 One, Product Definition & Classification: What exactly is a "Plastic Bracket"?
A plastic bracket is a generic term used in industrial, commercial, and consumer applications to support, hold, or connect other components. In international trade, its classification depends heavily on its function, material, and specific use case.
For the item "Plastic Bracket 24", without further context, it falls into two main categories: 1. Part of a Specific Machine/Device: If it is an exclusive part for an automatic control device or a specific machine. 2. General Plastic Article: If it is a generic connector, connector piece, or structural support not specifically named elsewhere in Chapter 90 or 85.
⚠️ Key Distinction:
- If the bracket is exclusively used for an automatic control device (e.g., a specific part of a sensor housing) → Chapter 90
- If it is a general plastic connector, support, or fastener → Chapter 39
📦 Two, HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the four possible classifications for "Plastic Bracket 24" under US Tariff schedules:
| HS Code | Product Description | Application Scenario | Total Tax Rate (China Origin) |
|---|---|---|---|
9032.90.61.80 |
Parts of Automatic Control Devices | Plastic bracket exclusive to automatic control apparatus; material: plastic. No conflict. | 36.7% |
9033.00.90.00 |
Parts & Accessories of Chapter 90 (Residual) | Generic part/accessory for Chapter 90 articles; material: plastic. Catch-all category. | 39.4% |
3926.90.99.89 |
Other Plastic Articles | General plastic bracket/holder; classified as a plastic article/fixture. | 22.8% |
3926.30.50.00 |
Plastic Fittings/Connectors | Plastic bracket used as a connector or support fixture; material: plastic. | 22.8% |
🔍 Important Reminder:
- Chapter 90 (HS 9032/9033) applies if the bracket is specifically identified as a part of an automatic control system or other Chapter 90 instruments. These have higher duties due to specific trade policies. - Chapter 39 (HS 3926) applies if the bracket is a general-purpose plastic part, connector, or fixture not specifically reserved for machinery/electronics. These have lower duties. - Selection Strategy: If the bracket is generic (e.g., mounting bracket for furniture, general industrial mounting), choose Chapter 39. If it is a specialized part for an automated device, choose Chapter 90.
💰 Three, 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Current tariffs apply (including Section 301, 122, etc.)
🎯 1. 9032.90.61.80 — Parts of Automatic Control Devices
| Item | Details |
|---|---|
| Base Duty Rate | 1.7% |
| Section 301 Add-on | 25.0% |
| Section 122 Add-on | 10.0% |
| Total Effective Rate | 36.7% |
| Tax Calculation | CIF Value × 36.7% |
| De Minimis Eligibility | ❌ Not Eligible (Deny de minimis for this code from China) |
| Legal Basis Path | Base Tariff → IEEPA 301 → Section 122 |
📌 Explanation:
- This code carries a high tariff burden (36.7%) because it is classified under automatic control device parts. - The 25% Section 301 and 10% Section 122 surcharges significantly increase costs. - Strategy: Avoid this code unless legally required by the product’s specific function.
🎯 2. 9033.00.90.00 — Parts & Accessories of Chapter 90 (Residual)
| Item | Details |
|---|---|
| Base Duty Rate | 4.4% |
| Section 301 Add-on | 25.0% |
| Section 122 Add-on | 10.0% |
| Total Effective Rate | 39.4% |
| Tax Calculation | CIF Value × 39.4% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Base Tariff → IEEPA 301 → Section 122 |
📌 Note:
- This is the "catch-all" for Chapter 90 parts. It has the highest total tax rate (39.4%) among all options. - Use only if no other specific Chapter 90 code fits, and be prepared for the highest cost.
🎯 3. 3926.90.99.89 — Other Plastic Articles
| Item | Details |
|---|---|
| Base Duty Rate | 5.3% |
| Section 301 Add-on | 7.5% |
| Section 122 Add-on | 10.0% |
| Total Effective Rate | 22.8% |
| Tax Calculation | CIF Value × 22.8% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Base Tariff → IEEPA 301 → Section 122 |
📌 Explanation:
- This code offers a significant cost saving compared to Chapter 90 codes. - Suitable for general-purpose plastic brackets (e.g., mounting brackets, decorative supports).
🎯 4. 3926.30.50.00 — Plastic Fittings/Connectors
| Item | Details |
|---|---|
| Base Duty Rate | 5.3% |
| Section 301 Add-on | 7.5% |
| Section 122 Add-on | 10.0% |
| Total Effective Rate | 22.8% |
| Tax Calculation | CIF Value × 22.8% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Base Tariff → IEEPA 301 → Section 122 |
📌 Note:
- Identical tax rate to3926.90.99.89. - Suitable if the bracket is explicitly used as a connector or joining piece in plastic assemblies. - Recommendation: If the bracket serves a connecting function, this is a valid and cost-effective choice.
🛠️ Four, Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
✅ 1. Required Documentation Checklist (Mandatory)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must detail dimensions, material (PP/ABS/etc.), load capacity, and intended use. |
| ✅ Product Photos (Clear) | ✔️ | Show the bracket from multiple angles, highlighting its shape and any mounting holes. |
| ✅ Commercial Invoice | ✔️ | Clearly state: "Plastic Bracket for [Specific Use], Material: [Plastic Type]". Avoid vague terms like "Accessory." |
| ✅ Packing List | ✔️ | Ensure quantity matches invoice. |
| ✅ Certificate of Origin (CO) | ✔️ | If claiming any potential exemptions (though unlikely for China origin under current tariffs). |
| ✅ Usage Declaration Letter | ✔️ | If using Chapter 39, declare that it is not a part of an automatic control device. |
✅ 2. Declaration Tips (Key Mantra)
🔥 "General Use = Chapter 39 (Low Tax); Specialized Part = Chapter 90 (High Tax)."
| Scenario | Correct HS Code | Incorrect Practice | Consequence |
|---|---|---|---|
| Generic mounting bracket (e.g., for shelves, pipes) | 3926.90.99.89 or 3926.30.50.00 |
Misdeclare as 9032.90.61.80 |
Overpay by ~14% (36.7% vs 22.8%) |
| Part of an automated sensor housing | 9032.90.61.80 |
Misdeclare as 3926... |
Underpayment → Penalty + Back Taxes |
| Unspecified plastic connector | 3926.30.50.00 |
Misdeclare as 9033.00.90.00 |
Overpay by ~16.6% (39.4% vs 22.8%) |
✅ 3. Special Case Handling
| Scenario | Handling Advice |
|---|---|
| OEM Custom Brackets | Provide design drawings showing generic shape to support Chapter 39 classification. |
| Brackets with Metal Inserts | If metal is >50% by weight, reclassify to Chapter 73/76. If plastic is primary, stay in Chapter 39. |
| Brackets for Medical Devices | If for medical equipment, still likely Chapter 39 unless it’s a part of the diagnostic device itself (Chapter 90). |
| De Minimis (Section 321) | ❌ Not Available for these codes from China. All shipments subject to full duty clearance. |
🌍 Five, Global Market Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3926.90.99.89 |
22.8% | None | Lowest cost option for generic brackets. |
| 🇺🇸 USA | 9032.90.61.80 |
36.7% | None | High cost; only for auto-control parts. |
| 🇨🇳 China | 3926.90.99.89 |
5.3% | None | Low import duty in China. |
| 🇪🇺 EU | 3926.90.97 |
6.5% | CE/RoHS | No Section 301/122 equivalents. |
| 🇦🇺 Australia | 3926.90.90 |
5.0% | C-Tick | Generally lower tariffs. |
📌 Conclusion:
- USA is the most challenging market due to Section 301 and 122 surcharges. - Chapter 39 (General Plastic Articles) is strongly recommended for "Plastic Bracket 24" unless it is indisputably a part of an automatic control device. - Savings: Choosing Chapter 39 over Chapter 90 can save ~14-16.6% in total tariffs.
📌 Six, Common Mistakes & Pitfall Guide (Lessons Learned)
❌ Mistake 1: Using vague description "Plastic Part"
👉 Consequence: CBP may reclassify to the highest applicable code or demand clarification → Delays.
✅ Fix: Specify "Plastic Mounting Bracket for General Use, Material: ABS."
❌ Mistake 2: Misclassifying a generic bracket as an "Automatic Control Device Part"
👉 Consequence: Paying 36.7% instead of 22.8%.
✅ Fix: Use Chapter 39 for non-specialized parts.
❌ Mistake 3: Assuming De Minimis (800 USD) applies
👉 Consequence: Shipment seized or assessed full duties + penalties.
✅ Fix: Plan for full duty clearance for all China-origin plastics under these codes.
❌ Mistake 4: Ignoring "Section 122" impact
👉 Consequence: Budgeting only for Section 301 (25%) but forgetting the additional 10%.
✅ Fix: Always calculate Total Rate = Base + 301 + 122.
🎯 Seven, Conclusion: Precise Classification, Cost Optimization!
🎯 Remember the Mantra:
🔹 "Generic Plastic = Chapter 39 (22.8%); Auto-Control Part = Chapter 90 (36.7%+)."
🔹 "HS Code determines your profit margin; choose wisely, save 14% instantly!"
📌 Pro Tip:
If "Plastic Bracket 24" is not explicitly designed for an automatic control device, always choose Chapter 39 (3926.90.99.89 or 3926.30.50.00) to minimize tax burden.
Provide clear product descriptions and photos to support this classification during customs audits.
📣 Immediate Action:
📞 Consult a licensed customs broker.
📤 Submit product images and usage descriptions.
🚀 Clear customs efficiently, maximize profits, and avoid costly reclassifications!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every dollar of tariff saved is pure profit gained!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。