sewing tool kit black
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 9605000000 | 18.1% | CN | US | 官方文档 |
| 4823908680 | 35.0% | CN | US | 官方文档 |
| 7319901000 | 67.5% | CN | US | 官方文档 |
| 7319909000 | 70.4% | CN | US | 官方文档 |
商品图片
AI分析
🧵 Sewing Tool Kit (Black) | Complete HS Code Classification & Customs Clearance Guide
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Compliance Strategy
📌 I. Product Definition & Classification: What Exactly is a "Sewing Tool Kit"?
A Sewing Tool Kit is a collection of tools designed for mending, crafting, or professional tailoring. In international trade, classification depends heavily on: 1. Material Composition: Are the tools made of plastic, metal, wood, or a mix? 2. Form Factor: Is it a loose set, or packaged in a specific container (e.g., pouch, case)? 3. Primary Function: Is it for domestic hand-sewing or industrial use?
⚠️ Key Classification Dilemma:
- If the kit is plastic/combined materials and packaged as a set → Often classified under Ch. 96 (Miscellaneous Manufactured Articles) as "sets."
- If the kit contains metal needles/tools primarily → May fall under Ch. 73 (Articles of Iron or Steel) or Ch. 48 (Paper products) if packaged in paper sleeves.
- Misclassification Risk: Declaring as "textile accessories" when it’s a metal tool set can lead to higher duties (up to 70%+) vs. lower duty sets (18%).
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Cross-Reference)
Based on the provided data, here are the only valid HS codes derived from the input "sewing tool kit black," along with the rationale and tax implications.
| HS Code | Product Description | Classification Rationale | Total Tax Rate |
|---|---|---|---|
9605.00.00.00 |
Sewing Kits (Sets) | Matches usage (sewing tools) and form (set/package). No material conflict. Most likely for plastic/wood/mixed kits in a case. | 18.1% |
4823.90.86.80 |
Other Paper Articles | Inferred from packaging: If the "kit" is primarily a paper-based sewing aid (e.g., paper pattern guides, paper-wrapped tools), it falls under "other paper products." | 35.0% |
7319.90.10.00 |
Iron/Steel Sewing Needles/Tools | Matches usage (sewing) and inferred material (iron/steel). Assumes the kit is dominated by metal needles/tools. | 67.5% |
7319.90.90.00 |
Other Iron/Steel Articles | Broad category for "other" sewing-related iron/steel items not specifically listed elsewhere. Fits general metal sewing tools. | 70.4% |
🔍 Critical Distinction:
-9605.00.00.00is the most favorable if the kit is a true "set" (e.g., in a fabric bag, plastic box, or wooden case) and not purely metal.
-7319.xxxxcodes attract heavy additional tariffs (50% Section 301 + 10% IEEPA) because they are classified as steel/iron products from China.
-4823.90.86.80is risky if the product is not predominantly paper; customs may reclassify it as metal, leading to penalties.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: 2025–2026 (Current Trade Environment)
🎯 1. 9605.00.00.00 —— Sewing Kits (Sets)
| Item | Detail |
|---|---|
| Base Tariff | 8.1% |
| Section 301 Surcharge | 0.0% |
| IEEPA Section 122 Surcharge | +10.0% |
| Total Tax Rate | 18.1% |
| Tax Calculation | CIF Value × 18.1% |
| De Minimis Eligibility | ❌ No (Deny de minimis if value > $800 or if specifically targeted; however, 18.1% is moderate) |
| Legal Authority | USITC:9605.00.00.00 → IEEPA:9903.01.25 (122 clause) |
📌 Explanation:
- This is the best-case scenario.
- The 10% IEEPA surcharge applies to all Chinese-origin goods under Section 122 (if active) or general trade war tariffs.
- No Section 301 (25%) applies here because it’s not classified as steel or specific tech goods.
🎯 2. 4823.90.86.80 —— Other Paper Articles
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surcharge | +25.0% |
| IEEPA Section 122 Surcharge | +10.0% |
| Total Tax Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Eligibility | ❌ No |
| Legal Authority | USITC:4823.90.86.80 → IEEPA:9903.01.24 → USITC:FOOTNOTE |
📌 Explanation:
- High risk. If customs determines the kit contains metal needles, they will reject this classification and reassign it to Ch. 73, triggering 67.5%–70.4% taxes.
- Only suitable if the kit is 100% paper-based (e.g., paper sewing patterns, paper thimbles, no metal).
🎯 3. 7319.90.10.00 —— Iron/Steel Sewing Needles/Tools
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surcharge | +7.5% |
| IEEPA Section 122 Surcharge | +10.0% |
| Section 301 Steel/Aluminum/Copper Surcharge | +50.0% |
| Total Tax Rate | 67.5% |
| Tax Calculation | CIF Value × 67.5% |
| De Minimis Eligibility | ❌ No |
| Legal Authority | USITC:7319.90.10.00 → IEEPA:9903.01.24 → USITC:FOOTNOTE:Steel/Al/Cu |
📌 Explanation:
- Severe Penalty: The 50% surcharge for steel/iron products from China is devastating.
- Applies if the kit is primarily metal needles/tools.
- Even a small set of metal needles can trigger this high rate.
🎯 4. 7319.90.90.00 —— Other Iron/Steel Articles
| Item | Detail |
|---|---|
| Base Tariff | 2.9% |
| Section 301 Surcharge | +7.5% |
| IEEPA Section 122 Surcharge | +10.0% |
| Section 301 Steel/Aluminum/Copper Surcharge | +50.0% |
| Total Tax Rate | 70.4% |
| Tax Calculation | CIF Value × 70.4% |
| De Minimis Eligibility | ❌ No |
| Legal Authority | USITC:7319.90.90.00 → IEEPA:9903.01.24 → USITC:FOOTNOTE:Steel/Al/Cu |
📌 Explanation:
- The highest possible tax rate for this product.
- Avoid this code unless the product is strictly metal and cannot be classified as a "sewing kit" (9605).
- The 50% steel surcharge is the key driver.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
✅ 1. Required Documentation Checklist
| Document | Must Provide | Purpose |
|---|---|---|
| ✅ Product Photos | ✔️ | Show the kit contents: Is it in a bag? Are tools plastic or metal? |
| ✅ Bill of Materials (BOM) | ✔️ | List all items: e.g., "10 plastic thimbles, 5 wooden pins, 1 metal needle" |
| ✅ Commercial Invoice | ✔️ | Clearly describe as "Sewing Kit, Plastic/Mixed Materials, in Cloth Bag" |
| ✅ Packing List | ✔️ | Confirm no heavy metal tools dominate the value |
| ✅ Origin Certificate | ✔️ | If non-China origin, can reduce tariffs |
✅ 2. Declaration Strategy (Key Mnemonic)
🔥 "Set vs. Tool: Plastic Wins, Metal Burns!"
| Scenario | Correct HS Code | Risk |
|---|---|---|
| Kit in a fabric/plastic case with mixed tools | 9605.00.00.00 |
✅ Low Risk (18.1%) |
| Kit with ONLY metal needles | 7319.90.10.00 |
❌ High Risk (67.5%) |
| Kit with ONLY paper patterns | 4823.90.86.80 |
⚠️ Medium Risk (35.0%) |
| Kit with metal tools but declared as paper | 4823.90.86.80 |
❌ Rejection & Penalty |
✅ 3. Special Handling Tips
| Situation | Recommendation |
|---|---|
| Mixed Material Kit | Emphasize "set" and "non-metal dominance" in description to push for 9605. |
| Pure Metal Kit | Accept the 67.5%–70.4% tax. Consider sourcing from non-China countries for US export. |
| Small Gift Sets | If value < $800, check de minimis rules, but steel tools are often excluded. |
| OEM Custom Kits | Provide design files showing material composition to justify 9605. |
🌍 V. Global Market Comparison (2026)
| Country/Region | Recommended HS Code | Duty Rate | Notes |
|---|---|---|---|
| 🇺🇸 USA | 9605.00.00.00 |
18.1% | Best option. Avoid Ch. 73 due to 50% steel surcharge. |
| 🇨🇳 China | 9605.00.00.00 |
5% | No additional surcharges for domestic trade. |
| 🇪🇺 EU | 9605.00.00 |
6.5% | Standard rate. No trade war surcharges. |
| 🇬🇧 UK | 9605.00.00 |
6.5% | Post-Brexit alignment with EU. |
📌 Conclusion:
- USA is the most challenging market due to Section 301 and IEEPA surcharges on steel/paper products.
-9605.00.00.00is the only competitive option for US exports from China.
- If your kit contains metal needles, consider repositioning as a "sewing accessory set" with non-metal dominance to qualify for 9605.
📌 VI. Common Mistakes & Pitfalls (Blood Lessons)
❌ Mistake 1: Declaring a metal needle kit as 9605.00.00.00
👉 Consequence: Customs reclassifies to 7319, imposing 67.5% tax + penalties.
❌ Mistake 2: Ignoring the 50% steel surcharge
👉 Consequence: Profit margin erased. A $10 kit becomes $17.04 in taxes.
❌ Mistake 3: Using vague descriptions like "Sewing Tools"
👉 Consequence: Customs defaults to the highest duty code (7319.90.90.00 at 70.4%).
✅ Correct Practice:
"Sewing Kit, Plastic & Wooden Tools, in Cloth Bag, Model ABC, 18.1% Duty Eligible"
🎯 VII. Conclusion: Precise Classification Saves Thousands!
🎯 Remember the Mnemonic:
🔹 "Plastic/Mixed = 18.1%, Metal = 67.5%+!"
🔹 "Set it as 9605, avoid the 50% steel tax!"
🔹 "HS Code is King, 49% difference can kill your profit!"
📌 Pro Tip:
If you export metal sewing tools to the US, consider shifting production to Vietnam or Mexico to avoid the 50% steel surcharge and qualify for FTAA/USMCA benefits.
📣 Immediate Action:
📞 Consult a licensed customs broker
📷 Provide clear photos of your kit’s contents
📄 Apply for an Advance Ruling if the kit has mixed materials
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Every Percentage Point of Tax is a Point of Profit Lost!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。