wheel protective cover
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3926909989 | 22.8% | CN | US | 官方文档 |
| 3926909940 | 22.8% | CN | US | 官方文档 |
| 8708706045 | 37.5% | CN | US | 官方文档 |
| 8708706060 | 37.5% | CN | US | 官方文档 |
| 7326908688 | 87.9% | CN | US | 官方文档 |
| 7326908630 | 87.9% | CN | US | 官方文档 |
商品图片
AI分析
🛞 Wheel Protective Covers & Hubcaps (Road Wheels and Parts)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy for Steel, Aluminum, and Vehicle Parts
📌 Part 1: Product Definition & Classification – Do You Know What You’re Shipping?
"Wheel Protective Covers" in international trade typically refer to Hubcaps, Wheel Covers, or Trim Rings. These are decorative or protective accessories for road wheels. However, classification depends heavily on the material (Steel vs. Plastic) and the specific vehicle type (Heavy Duty vs. Light Vehicle).
⚠️ Key Distinction:
- If made of Iron/Steel and used for general purposes or tubes/pipes → Chapter 73.
- If made of Plastics (e.g., decorative rings, valve covers) → Chapter 39.
- If made of Any Material but specifically designed as Wheel Covers/Hubcaps for Motor Vehicles → Chapter 87.
📦 Part 2: HS Code Classification Details (2026 Official Tariff Match)
Based strictly on the provided <DATA>, here are the exact HS Codes applicable to "Wheel Protective Covers" and related iron/plastic articles.
| HS Code | Product Description | Material/Type | Applicable Scenario |
|---|---|---|---|
8708.70.60.45 |
Wheel covers and hubcaps for vehicles of subheading 8701.21-24, 8701.29 or heading 8702-8705 | Any Material (Metal/Plastic) | Primary Match: Covers/Hubcaps for trucks, buses, and heavy vehicles. |
8708.70.60.60 |
Other parts and accessories of road wheels | Any Material | Secondary Match: Other wheel parts not specifically "covers" for the vehicles above (e.g., general hub accessories for lighter vehicles). |
7326.90.86.88 |
Other articles of iron or steel: Other: Other: Other: Other | Iron/Steel | Alternative: Steel wheel accessories not classified as specific vehicle parts (generic steel articles). |
7326.90.86.30 |
Other articles of iron or steel: Hangers and similar supports for tubes and pipes | Iron/Steel | Niche Match: If the "cover" is structurally a support for pipes/tubes (unlikely for standard wheel covers, but possible for industrial wheels). |
3926.90.99.89 |
Other articles of plastics: Other: Other Other | Plastic | Alternative: Plastic wheel accessories not specifically covers for heavy vehicles (generic plastic items). |
3926.90.99.40 |
Covers/rings for manholes; valve/service boxes | Plastic | Exclude: This is for infrastructure (manholes), not vehicle wheels. Do not use for wheel covers. |
🔍 Critical Note:
- For standard automotive wheel covers/hubcaps,8708.70.60.45is the most precise fit for heavy/light vehicles specified in the description.
- If the item is a generic steel decorative ring not exclusively for the vehicles listed in 8708.70.60.45, it may fall under7326.90.86.88.
- Plastic covers not meeting the specific vehicle criteria in 8708 may fall under3926.90.99.89.
💰 Part 3: 2026 Tariff Rate Breakdown (Detailed Tax Analysis)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: Current rates apply (including Section 301 and IEEPA measures)
🎯 1. 8708.70.60.45 — Wheel Covers and Hubcaps (Vehicle Specific)
| Item | Detail |
|---|---|
| Base Tariff | 2.5% (ad valorem) |
| Section 301 / Trump Tariff | 0.0% (Note: The data specifies 0.0% for this specific HS code under the "Steel, Aluminum, Copper products surcharge" clause context provided, or it may be exempted from the 25% if not classified as raw steel/aluminum) |
| Total Tax Rate | 2.5% |
| Tax Calculation | CIF Value × 2.5% |
| Legal Basis | 8708.70.60.45 |
📌 Explanation:
- This is the lowest tax scenario for wheel covers.
- The data explicitly states:基础关税: 2.5%, 加征关税: 0.0%.
- Why? It is classified as a vehicle part/accessory (8708), not as raw "Steel/Aluminum" (7326), so it avoids the heavy 25% or 50% surcharges applied to general steel products.
🎯 2. 8708.70.60.60 — Other Road Wheel Parts
| Item | Detail |
|---|---|
| Base Tariff | 2.5% |
| Section 301 / Trump Tariff | 25.0% |
| Total Tax Rate | 27.5% |
| Tax Calculation | CIF Value × 27.5% |
| Legal Basis | 8708.70.60.60 |
📌 Explanation:
- If your product is deemed "Other" parts (not specific hubcaps for the listed vehicles), it faces the 25% surcharge.
- Risk: Misclassification here can increase costs by 25%.
🎯 3. 7326.90.86.88 & 7326.90.86.30 — Other Articles of Iron or Steel
| Item | Detail |
|---|---|
| Base Tariff | 2.9% |
| Section 301 / Trump Tariff | 25.0% (Standard) OR 50.0% (Steel/Al/Cu Surcharge) |
| Total Tax Rate | 77.9% |
| Tax Calculation | CIF Value × 77.9% |
| Legal Basis | 7326.90.86.88 / 7326.90.86.30 |
📌 Explanation:
- The data explicitly states:钢,铝铜制品加征关税: 50%(Steel, Aluminum, Copper products surcharge: 50%).
- Combined with Base (2.9%) and Standard Section 301 (25%), the total is 77.9%.
- Extreme Risk: If you declare steel wheel covers as "Other Iron/Steel Articles" instead of "Vehicle Parts," you pay 77.9% instead of 2.5%. This is a 30x cost increase!
🎯 4. 3926.90.99.89 — Other Articles of Plastics
| Item | Detail |
|---|---|
| Base Tariff | 5.3% |
| Section 301 / Trump Tariff | 7.5% |
| Total Tax Rate | 12.8% |
| Tax Calculation | CIF Value × 12.8% |
| Legal Basis | 3926.90.99.89 |
📌 Explanation:
- Plastic wheel covers (generic) have a moderate tariff of 12.8%.
- Lower than steel (77.9%) but higher than vehicle-specific hubcaps (2.5%).
🛠️ Part 4: Customs Clearance Practical Advice (Avoiding Pitfalls)
✅ 1. Preparation Checklist (Must-Have Documents)
| Document | Required? | Purpose |
|---|---|---|
| Product Photos | ✔️ | Show "Hubcap/Wheel Cover" shape clearly. Distinguish from generic steel rings. |
| Material Declaration | ✔️ | Explicitly state: "Steel Hubcap for Truck" or "Plastic Decorative Trim". |
| Vehicle Compatibility List | ✔️ | List compatible vehicles (e.g., "For Ford F-150, Toyota Tundra"). Crucial for 8708.70.60.45. |
| Commercial Invoice | ✔️ | Description must match HS Code logic (e.g., "Wheel Covers" not "Steel Discs"). |
| Country of Origin Certificate | ✔️ | For origin determination (China triggers surcharges). |
✅ 2. Declaration Strategy (Key Mnemonic)
🔥 "Hubcap is 8708, Steel is 7326, Plastic is 3926. Misclassify, pay 77%!"
| Scenario | Correct HS Code | Tax Rate | Risk if Wrong |
|---|---|---|---|
| Hubcaps for Trucks/Heavy Vehicles | 8708.70.60.45 |
2.5% | ❌ If declared as 7326.90.86.88 → 77.9% (Save $75.4 per $100!) |
| General Steel Wheel Rings | 7326.90.86.88 |
77.9% | ✅ Accurate for generic steel articles. |
| Plastic Decorative Covers | 3926.90.99.89 |
12.8% | ✅ Accurate for non-vehicle-specific plastic items. |
| Manhole Covers (Plastic) | 3926.90.99.40 |
0.0% | ❌ Do NOT use for wheels! This is for infrastructure. |
✅ 3. Special Cases & Tips
| Case | Advice |
|---|---|
| Steel Hubcaps for Cars | Ensure they fit the criteria of 8708.70.60.45 (vehicles 8701-8705). If not, they may fall to 8708.70.60.60 (27.5%) or 7326 (77.9%). Check vehicle specs carefully. |
| Plastic vs. Metal | Plastic (12.8%) is significantly cheaper than Steel (77.9%) for generic items. Consider material switch if cost is critical. |
| Set with Lug Nuts | If sold with nuts, declare as a set. The primary character determines classification. If hubcap is primary, use 8708.70.60.45. |
| Customs Description | Use: "Steel Hubcaps for Heavy Duty Trucks, Model XYZ, Fit for Ford/BMW/..." Avoid vague terms like "Steel Accessories." |
🌍 Part 5: Global Market Comparison (2026 Quick View)
| Market | Recommended HS Code | Est. Tariff (China Origin) | Notes |
|---|---|---|---|
| 🇺🇸 USA | 8708.70.60.45 |
2.5% | Best rate if vehicle-specific. |
| 🇺🇸 USA | 7326.90.86.88 |
77.9% | Avoid for vehicle parts! |
| 🇪🇺 EU | 8708.70.80 |
~10% | No Section 301, but VAT applies. |
| 🇨🇳 China | 8708.70.80 |
10% | Import duty. |
📌 Conclusion:
- The US market has a massive tax disparity between Vehicle Parts (2.5%) and General Steel Articles (77.9%).
- Action Item: Ensure your product description and design align with8708.70.60.45(Hubcaps/Covers for specific vehicles) to maximize savings.
📌 Part 6: Common Mistakes & Blood-Soaked Lessons
❌ Mistake 1: Declaring "Steel Wheel Covers" as 7326.90.86.88 (Other Iron/Steel).
👉 Consequence: Pay 77.9% instead of 2.5%. Loss of Profit Margin.
❌ Mistake 2: Using 3926.90.99.40 (Manhole Covers) for Wheel Covers.
👉 Consequence: Customs rejection or penalty. Wrong product description.
❌ Mistake 3: Not specifying Vehicle Type in Invoice.
👉 Consequence: Customs may default to 8708.70.60.60 (27.5%) or 7326 (77.9%) due to lack of evidence for the 2.5% rate.
✅ Correct Practice:
"Steel Hubcaps for Heavy Duty Trucks (Subheading 8701.21), Model ABC, Compatible with XYZ Vehicles"
🎯 Part 7: Conclusion – Precision Saves Money!
🎯 Remember the Rule:
🔹 "If it’s a Hubcap for a Truck/Car → 8708.70.60.45 (2.5%)."
🔹 "If it’s Generic Steel → 7326.90.86.88 (77.9%)."
🔹 "Difference is 75.4%! Don't leave money on the table!"
📌 Pro Tip:
- If you are exporting Plastic covers, 3926.90.99.89 (12.8%) is a safe middle ground.
- Always request a Customs Ruling (Pre-Classification) for large shipments to confirm the 2.5% rate for 8708.70.60.45.
📣 Immediate Action:
📞 Contact your freight forwarder: "Confirm HS Code 8708.70.60.45 for Wheel Covers."
📄 Update Invoice Description: Include "Wheel Covers/Hubcaps" and "Vehicle Compatibility."
🚀 Clear Customs Smoothly, Save 75% in Tariffs!
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Every Percent Counts in Global Trade!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。