white fabric lint remover
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 9603908050 | 70.3% | CN | US | 官方文档 |
| 8510905500 | 39.2% | CN | US | 官方文档 |
| 8479897000 | 35.0% | CN | US | 官方文档 |
| 8479896500 | 20.3% | CN | US | 官方文档 |
商品图片
AI分析
🧶 White Fabric Lint Remover (去毛球器)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level通关 Strategy
📌 I. Product Definition & Classification: Is It a Tool, a Machine, or a Part?
A "White Fabric Lint Remover" is a device used for removing pills, fuzz, and lint from fabric surfaces. The critical classification hinges on its power mechanism and functional independence:
- Manual Mechanical Tool: If it is hand-cranked or push-pull without any motor, it falls under household cleaning/organizing tools.
- Electric Appliance: If it contains a self-contained electric motor, it is classified as a small household electrical machine or appliance.
- Component: If it is sold only as a replacement part (e.g., a motor assembly without the casing or functional head), it may be classified differently.
⚠️ Key Distinction Point:
- No Motor → Classified as a Manual Tool (Section 96).
- Has Motor + Independent Function → Classified as a Small Electrical Machine (Section 84).
- Motor Only/Part → Classified as a Part/Accessory (Section 85).
📦 II. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
Based on the provided data, here are the three potential classifications depending on the product's specific configuration:
| HS Code | Product Description | Scenario | Power Source |
|---|---|---|---|
9603.90.80.50 |
Manual Fabric Lint Remover: Non-electric, mechanical tool for cleaning/grooming. | Hand-cranked shaver, push-type blade remover. | ❌ No Motor |
8479.89.70.00 |
Electric Lint Remover (General): Small electrical household machine with independent function. | Standard electric shaver with casing, battery/AC powered. | ✅ Has Motor |
8479.89.65.00 |
Electric Lint Remover (Specific): Machine with self-contained motor, specific sub-category logic. | Electric shaver, potentially different regulatory footnote treatment. | ✅ Has Motor |
8510.90.55.00 |
Part/Accessory for Hair Trimmers/Shavers: Equipment parts or related accessories. | Note: Data suggests this applies if classified as a "part" or under specific trimmer accessory rules. | 🔧 Component |
🔍 Critical Reminder:
- Do not classify an electric lint remover as a "part" (8510) if it is a complete, functioning unit. It must be8479.
- Do not classify a manual lint remover as an "electrical machine." It must be9603.
- Misclassification leads to massive duty differences (e.g., 70.3% vs. 20.3%).
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties & Policy Surcharges)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Time: Current Trade Restrictions (Section 301 & IEEPA)
🎯 1. 9603.90.80.50 —— Manual Fabric Lint Remover (Non-Electric)
| Item | Content |
|---|---|
| Base Tariff | 2.8% (ad valorem) |
| Section 301 Additional Duty | +7.5% |
| Section 122 Duty (Steel/Aluminum/Copper) | +50% (⚠️ Note: This seems high/unusual for plastic/textile tools, but strictly follows provided data context for "Steel/Aluminum parts" or specific legislative overlap. Verify physical composition.) |
| IEEPA Additional Duty | +10% |
| Total Tax Rate | 70.3% |
| Tax Calculation | CIF Value × 70.3% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | Base Rate → USITC Footnote → Section 122 → IEEPA:9903.01.25 |
📌 Explanation:
- The 70.3% rate is extremely high. This includes a potential 50% Section 122 duty if the product contains significant steel/aluminum components (e.g., metal blades, metal housing) and is interpreted under specific industrial material restrictions.
- Risk: If the product is mostly plastic with a small metal blade, the 50% steel tax might be challenged, but currently, the data indicates this total.
- Base 2.8% + Add-on 7.5% + IEEPA 10% + Section 122 50% = 70.3%.
🎯 2. 8510.90.55.00 —— Parts/Accessories for Hair Trimmers/Shavers
| Item | Content |
|---|---|
| Base Tariff | 4.2% |
| Section 301 Additional Duty | +25.0% |
| Section 122 Duty | None (Not applicable in this line item per data) |
| IEEPA Additional Duty | +10% |
| Total Tax Rate | 39.2% |
| Tax Calculation | CIF Value × 39.2% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | Base Rate → USITC → IEEPA:9903.01.24 |
📌 Explanation:
- This classification treats the lint remover as a part or accessory to a broader category (like hair trimmers).
- 39.2% is still very high due to the 25% Section 301 duty.
- Caution: This is likely an incorrect classification for a complete unit. Only use if importing replacement heads or motor assemblies only.
🎯 3. 8479.89.70.00 —— Electric Lint Remover (Small Electrical Machine)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Duty | +25.0% |
| Section 122 Duty | None |
| IEEPA Additional Duty | +10% |
| Total Tax Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | Base Rate → USITC → IEEPA:9903.01.24 |
📌 Explanation:
- Classified as a "Machine Having Individual Function" (Small Household Appliance).
- 35.0% total duty.
- Base rate is 0%, but Section 301 (25%) and IEEPA (10%) apply.
🎯 4. 8479.89.65.00 —— Electric Lint Remover (Specific Sub-category)
| Item | Content |
|---|---|
| Base Tariff | 2.8% |
| Section 301 Additional Duty | +7.5% |
| Section 122 Duty | None |
| IEEPA Additional Duty | +10% |
| Total Tax Rate | 20.3% |
| Tax Calculation | CIF Value × 20.3% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | Base Rate → USITC → IEEPA:9903.01.24 |
📌 Explanation:
- This is the OPTIMAL classification for electric lint removers if available.
- 20.3% is significantly lower than9603(70.3%) and8479.89.70.00(35.0%).
- It assumes the product is a "Machine with self-contained motor" falling into this specific sub-heading, likely with a lower Section 301 burden (7.5% vs 25%).
- Strategy: Argue for this classification by emphasizing the "self-contained motor" and "specific machine function" rather than generic "household appliance."
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance Guide)
✅ 1. Preparation Checklist (Must-Haves)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state: Motor Type (DC/AC), Voltage, Wattage, Dimensions. |
| ✅ Photos | ✔️ | Clear images of the motor interior (if disassembled) or plug/power cord to prove it's electric. |
| ✅ Commercial Invoice | ✔️ | Describe as "Electric Fabric Lint Remover, Model XYZ, 120V/60Hz". Avoid generic "Cleaning Tool." |
| ✅ Part Number List | ✔️ | If selling heads/blades separately, list them distinctly to avoid being grouped into 8510 (39.2%) if possible, or justify 8479.89.65.00. |
| ✅ FCC Certification | ✔️ | Required for any electronic device with a motor in the US. |
✅ 2. Declaration Strategy (Key Mnemonics)
🔥 “Electric vs. Manual, Code Matters, Duty Drops Fast!”
| Scenario | Correct HS Code | Duty Rate | Risk if Misdeclared |
|---|---|---|---|
| Electric Lint Remover | 8479.89.65.00 |
20.3% | Misdeclaring as 9603 (Manual) → 70.3% (Huge Penalty!) |
| Electric Lint Remover | 8479.89.70.00 |
35.0% | Acceptable if 8479.89.65.00 is rejected. |
| Manual Lint Remover | 9603.90.80.50 |
70.3% | Note: High duty due to Section 122. Check if plastic/metal mix can be argued differently. |
| Replacement Heads Only | 8510.90.55.00 |
39.2% | Do not declare as full machine. |
📌 Crucial Insight:
- The difference between 20.3% (8479.89.65.00) and 70.3% (9603.90.80.50) is 50 percentage points.
- Always declare Electric devices as8479series, never as9603(manual tools), even if they look similar.
- Within8479, fight for8479.89.65.00to benefit from the lower 7.5% Section 301 duty instead of 25%.
✅ 3. Special Circumstances
| Situation | Handling Advice |
|---|---|
| Plastic Body, Metal Blade | For 9603, argue against Section 122 steel tax if the metal component is minor (<5% weight/value). Provide Bill of Materials. |
| Battery-Powered | Still 8479.89.65.00. Declare as "Rechargeable Electric Lint Remover." |
| OEM for US Brand | Provide authorization letter. May help in proving "specific machine function" for 8479.89.65.00. |
| Sample/Shipment < $800 | ❌ No De Minimis Exemption. All these codes are explicitly listed as not eligible for de minimis (Section 321). Tax applies from $1. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Duty (China Origin) | Key Requirement |
|---|---|---|---|
| 🇺🇸 USA | 8479.89.65.00 |
20.3% | FCC, Detailed Specs |
| 🇪🇺 EU | 8479.89.95 |
~0-5% (CE Mark) | CE, RoHS |
| 🇨🇳 China | 8510.90 |
~0-5% | CCC (if electric) |
| 🇬🇧 UK | 8479.89 |
~0-5% | UKCA |
📌 Conclusion:
- The USA is the most complex due to Section 301 and IEEPA surcharges.
- Electronics are cheaper than Manual Tools in the US duty structure due to base rate differences and Section 122 applicability on manual items.
📌 VI. Common Errors & Pitfalls (Blood & Tears Lessons)
❌ Error 1: Declaring an Electric lint remover as 9603 (Manual).
👉 Consequence: Tax jumps from 20.3% to 70.3%. Penalty for undervaluation/misclassification!
❌ Error 2: Using generic name "Fabric Cleaner" in invoice.
👉 Consequence: Customs assigns default high tariff code. Delays + Extra Tax.
❌ Error 3: Assuming De Minimis ($800) applies.
👉 Consequence: No exemption. You pay tax on every single unit, even small shipments.
❌ Error 4: Ignoring Section 122 for manual metal blades.
👉 Consequence: Unexpected 50% steel/aluminum duty on 9603 classification.
✅ Correct Declaration Example:
"Electric Fabric Lint Remover, Rechargeable, Model XYZ, 120V/60Hz, 15W, Plastic Housing with Stainless Steel Blades, FCC Certified, HS: 8479.89.65.00"
🎯 VII. Conclusion: Precision Classification Saves Money!
🎯 Remember the Mnemonic:
🔹 "Electric is 8479, Manual is 9603."
🔹 "65.00 is Best (20.3%), 70.00 is Mid (35.0%), 9603 is Worst (70.3%)."
🔹 "No De Minimis, Tax on Every Unit, Start from $0."
📌 Pro Tip:
If your product is Electric, ALWAYS aim for
8479.89.65.00. Provide technical data sheets proving it is a "machine with individual function" and "self-contained motor."
If it is Manual, expect 70.3% unless you can successfully challenge the Section 122 steel tax (requires strong legal argument on material composition).
📣 Immediate Action:
📞 Consult Customs Broker: Request Pre-Ruling for
8479.89.65.00.
📄 Document Everything: Keep specs, photos, and motor details ready for CBP audit.
🚀 Optimize Supply Chain: If possible, shift manual production to avoid 70.3% duty, or accept electric classification for lower 20.3%.
✨ Professional Clearance, Starts with Exact Classification!
💼 Every 1% of Duty Saved is Pure Profit!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。