Plastic Coated Men's/Boys' Uniforms
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 6113001005 | 21.3% | CN | US | Official Doc |
| 6203499045 | 20.3% | CN | US | Official Doc |
| 6210403500 | 13.8% | CN | US | Official Doc |
| 6210407500 | 20.8% | CN | US | Official Doc |
| 6203499010 | 20.3% | CN | US | Official Doc |
Product Images
AI Analysis
π§₯ Plastic Coated Men's/Boys' Uniforms
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
π I. Product Definition & Classification: Do You Understand "Plastic-Coated Workwear"?
Men's and boys' uniforms coated, covered, or impregnated with plastic materials are critical protective gear in industrial, construction, chemical, and agricultural sectors. In international trade, the classification hinges on:
- The type of coating: Is it "impregnated," "coated," or "covered"?
- The base material: Is the underlying fabric textile-based?
- The garment type: Is it a jacket, trousers, overall, or a set?
β οΈ Key Classification Distinctions:
- Impregnated with Rubber/Plastic: If the fabric is fully saturated or coated with rubber/plastic β 6113.00.10.05 (Knitted/Woven) or 6210 series (Woven).
- Surface Coating Only: If plastic is merely applied to the surface without saturation β 6210.40.35.00 or 6210.40.75.00.
- Overall/Pant Style: If the garment is a full-body suit or bib-and-brace design β 6203.49.90.10 (Textile base).
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority)
| HS Code | Product Description | Application Scenario | Tax Rate (Total) |
|---|---|---|---|
| 6113.00.10.05 | Men's/Boys' Workwear, impregnated/coated with rubber/plastic materials, falls under jacket/blazer category | Heavy-duty raincoats, chemical-resistant jackets, full-body protective suits | 21.3% |
| 6203.49.90.45 | Men's/Boys' Workwear, other textile materials, plastic coating does not conflict | Lighter work trousers/pants with waterproof finish, multi-purpose coveralls | 20.3% |
| 6203.49.90.10 | Men's/Boys' Workwear, Bib-and-Brace Trousers/Suits, Textile Base | Overalls, dungarees, protective sets with textile base | 20.3% |
| 6210.40.35.00 | Men's/Boys' Garments, outer layer coated/covered/impregnated with plastic, textile base | Specialized industrial coats, lightweight plastic-laminated uniforms | 13.8% |
| 6210.40.75.00 | Men's/Boys' Garments, outer layer plastic-coated, covering underlying fabric | Fully coated outerwear, dual-layer protective garments | 20.8% |
π Critical Insight:
- 6113.00.10.05 is specific to knitted or specific jacket styles with heavy rubber/plastic impregnation.
- 6203 series (49.90) is for trousers/overalls. The distinction between 10 (Bib-and-Brace) and 45 (Other) depends on the cut and style.
- 6210 series is for woven fabrics treated with plastic. The tax rate varies significantly based on the depth of coating (3.8% base vs. 3.3% base).
π° III. 2026 Latest Tariff Rate Breakdown (US Market Focus)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Date: Current (Including Section 301 & 122 Tariffs)
π― 1. HS Code 6113.00.10.05 β Rubber/Plastic Impregnated Workwear
| Item | Content |
|---|---|
| Basic Duty Rate | 3.8% (Standard MFN) |
| Section 301 Tariff (Tr. List 3) | +7.5% (China-specific retaliation) |
| Section 122 Tariff (Tr. List 122) | +10.0% (China-specific trade measure) |
| Total Tariff Rate | 21.3% |
| Tax Calculation | CIF Value Γ 21.3% |
| De Minimis Exemption | β Not Applicable (Deny De Minimis) |
| Legal Pathway | USITC:6113.00.10.05 β Section 301:1023 β Section 122:1036 |
π Explanation:
- 3.8%: Standard base tariff for textile workwear.
- 7.5%: Section 301 Tariff (Trade Remedies) applied to Chinese textile products.
- 10%: Section 122 Tariff (Trade Action 122), a specific surcharge on Chinese imports.
- Total 21.3%: A significant cost factor for importers.
π― 2. HS Code 6203.49.90.45 & 6203.49.90.10 β Workwear Trousers/Overalls
| Item | Content |
|---|---|
| Basic Duty Rate | 2.8% (Textile base) |
| Section 301 Tariff | +7.5% |
| Section 122 Tariff | +10.0% |
| Total Tariff Rate | 20.3% |
| Tax Calculation | CIF Value Γ 20.3% |
| De Minimis Exemption | β Not Applicable |
| Legal Pathway | USITC:6203.49.90.xx β Section 301:1023 β Section 122:1036 |
π Note:
- These items have a lower base duty (2.8% vs 3.8%) but still face the full 17.5% in combined surcharges.
- Whether it is 6203.49.90.10 (Bib-and-Brace) or 6203.49.90.45 (Other) does not change the tax rate, but accurate description is vital for customs clearance.
π― 3. HS Code 6210.40.35.00 β Plastic Coated/Woven Garments (Lowest Tax)
| Item | Content |
|---|---|
| Basic Duty Rate | 3.8% |
| Section 301 Tariff | +0.0% (Specific exemption for this subheading) |
| Section 122 Tariff | +10.0% |
| Total Tariff Rate | 13.8% |
| Tax Calculation | CIF Value Γ 13.8% |
| De Minimis Exemption | β Not Applicable |
| Legal Pathway | USITC:6210.40.35.00 β Section 122:1036 |
π Strategic Opportunity:
- This is the LOWEST tax rate (13.8%) among the options!
- Why? Section 301 (7.5%) is NOT applied here. Only Base (3.8%) + Section 122 (10%) = 13.8%.
- Condition: Must strictly fall under "6210.40.35.00" description (Outer layer coated/covered/impregnated, textile base, specific construction). Do not misclassify as 6210.40.75.00 to save money.
π― 4. HS Code 6210.40.75.00 β Plastic Coated Garments (Higher Tax)
| Item | Content |
|---|---|
| Basic Duty Rate | 3.3% |
| Section 301 Tariff | +7.5% |
| Section 122 Tariff | +10.0% |
| Total Tariff Rate | 20.8% |
| Tax Calculation | CIF Value Γ 20.8% |
| De Minimis Exemption | β Not Applicable |
| Legal Pathway | USITC:6210.40.75.00 β Section 301:1023 β Section 122:1036 |
π Warning:
- Despite a lower base duty (3.3%), the Section 301 (7.5%) applies here, pushing the total to 20.8%.
- This is a "trap" code if not carefully managed.
π οΈ IV. Customs Clearance Practical Suggestions (Real-World Pitfall Avoidance)
β 1. Documentation Checklist (Mandatory)
| Document | Required | Reason |
|---|---|---|
| Product Specification Sheet | βοΈ | Must explicitly state "Plastic Coated," "Rubber Impregnated," or "Laminated." |
| Material Composition Label | βοΈ | Confirm % of textile vs. plastic material to justify HS Code. |
| Product Photos (Side/Back) | βοΈ | Show coating texture, seams, and closure type (zippers/buttons). |
| Factory Test Report | βοΈ | Waterproof test, tensile strength, coating adhesion test (crucial for 6210). |
| Commercial Invoice | βοΈ | Must match HS Code description exactly (e.g., "Woven Garment, Plastic Coated"). |
| Packing List | βοΈ | Show dimensions and weight for duty assessment. |
| Certificate of Origin | βοΈ | Essential for Section 301/122 applicability. |
β 2. Declaration Strategy (Key Mantra)
π₯ "Coating Depth Matters! Base Material Defines the Code! Textile vs. Plastic Ratio!"
| Scenario | Correct Declaration | Wrong Practice | Consequence |
|---|---|---|---|
| Heavy Rubber Impregnation | 6113.00.10.05 |
Report as 6210 |
Risk of audit/penalty |
| Light Plastic Coating (Woven) | 6210.40.35.00 |
Report as 6210.40.75.00 |
Overpay 7% (13.8% vs 20.8%) |
| Bib-and-Brace Overalls | 6203.49.90.10 |
Report as 6203.49.90.45 |
No tax difference, but Compliance Risk |
| Trousers with Light Finish | 6203.49.90.45 |
Report as 6113 |
21.3% instead of 20.3% |
β 3. Special Handling Scenarios
| Scenario | Handling Advice |
|---|---|
| "Plastic" vs. "Rubber" | If the coating is Rubber, it MUST go to 6113. If Plastic, check 6210 or 6203. |
| Mixed Materials | If the garment has a textile base + plastic coating, it is generally 6210. If fully saturated, it is 6113. |
| OEM Customization | Provide design drawings showing the "plastic layer" to prove it's not just a "textile" garment. |
| Section 122 Exemptions | Currently, NO exemptions for these textile categories. Prepare for full payment. |
π V. Global Market Comparison (2026)
| Country/Region | Recommended HS Code | Duty Rate (China) | Key Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 6210.40.35.00 |
13.8% (Lowest) | FCC (if electronic), N/A for cloth | High risk of Section 301 on other codes |
| πͺπΊ EU | 6210.40.35.00 |
0-4% | CE, REACH | No Section 301/122 |
| π―π΅ Japan | 6210.40.35.00 |
8-10% | PSE (if electronic) | Stable rates |
| π¦πΊ Australia | 6210.40.35.00 |
5% | RCM | Low risk |
π Conclusion:
- USA is the most critical market due to Section 301 (7.5%) and Section 122 (10%) surcharges.
- Optimize Classification: If your product qualifies for 6210.40.35.00, you save 7% compared to others. Do not default to 6210.40.75.00.
π VI. Common Mistakes & Pitfall Avoidance (Lessons Learned)
β Mistake 1: Calling "Plastic Coated" as "Waterproof Textile"
π Result: May be classified as standard textile (lower base rate) but face Section 122 anyway. Misleading declaration leads to fines.
β Mistake 2: Confusing "Rubber" vs. "Plastic" Coating
π Result: 6113.00.10.05 (Rubber) has 21.3% tax. If you claim "Plastic" to get 13.8%, but the product is Rubber, Customs will seize/reject.
β Mistake 3: Reporting 6210.40.75.00 when 6210.40.35.00 applies
π Result: Overpay 7% (20.8% vs 13.8%). A simple code swap can save thousands.
β Mistake 4: Splitting "Coated Jacket" + "Lining" for lower duty
π Result: If the coating covers the whole garment, it must be one code. Splitting is fraud.
β Correct Approach:
"Men's Workwear, Woven Fabric Base, Outer Layer Coated with PVC Plastic, Water Resistant, Model XYZ, Certified for Industrial Use."
π― VII. Conclusion: Precision in Classification, Savings in Duty!
π― Remember the Mantra:
πΉ "Rubber = 21.3%, Plastic-Coated = 13.8% (if 6210.40.35.00), Overalls = 20.3%."
πΉ "Section 301 (7.5%) is the killer! Avoid it by choosing 6210.40.35.00 if possible!"
πΉ "Don't split the garment! Declare the whole coated unit!"
π Pro Tip:
If your product is plastic-coated but the coating is very thin (not "impregnated"), try to qualify for 6210.40.35.00 to avoid the 7.5% Section 301 surcharge.
Consult a Customs Broker for a Pre-Classification Ruling before shipping to ensure you don't get hit with 21.3% or 20.8% by mistake.
π£ Take Action Now:
π Contact your Customs Broker + Provide Product Photos + Request 6210.40.35.00 classification
π Save 7% in duties, ensure smooth customs clearance, and maximize your profit!
β¨ Professional Customs, Starts with the Right HS Code!
πΌ Every Dollar of Duty Counts!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.