片装
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7606123096 | 13.0% | CN | US | Official Doc |
| 7606113060 | 13.0% | CN | US | Official Doc |
| 3920992000 | 39.2% | CN | US | Official Doc |
| 3920591000 | 41.0% | CN | US | Official Doc |
AI Analysis
📦 Sheet-Form Aluminum & Plastic Materials (Aluminum Plates, Sheets, Strip & Plastic Films)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Pro-Level Import Strategy
📌 One, Product Definition & Classification: What Exactly Are "Sheet-Form" Goods?
In international trade, "sheet-form" materials refer to flat, thin, flexible, or rigid flat products that are not in roll form, typically used in manufacturing, construction, electronics, packaging, and automotive industries.
These include: - Aluminum plates, sheets, and strip (over 0.2 mm thickness) - Plastic films, foils, and sheets (non-cellular, not reinforced or laminated)
⚠️ Key Differentiator:
- Rectangular/square shape with defined dimensions → HS Code 7606.12.30.96 / 7606.11.30.60
- Flexible films/strips → HS Code 3920.99.20.00 / 3920.59.10.00
- Not rolled, not coiled, not continuous → Must be declared as "sheet" or "plate", not "roll" or "strip in coil"
📦 Two, HS Code Classification Details (2026 Official Tariff Match)
| HS Code | Product Description | Use Case | Thickness | Clad? | Shape |
|---|---|---|---|---|---|
7606.12.30.96 |
Aluminum plates, sheets, strip >0.2mm, rectangular/square, aluminum alloy, not clad, thickness ≤6.3 mm, other | Industrial parts, automotive, electronics, construction | ≤6.3 mm | ❌ No | ✅ Rectangular/Square |
7606.11.30.60 |
Aluminum plates, sheets, strip >0.2mm, rectangular/square, pure aluminum, not clad, thickness ≤6.3 mm | Packaging, food containers, decorative panels, general fabrication | ≤6.3 mm | ❌ No | ✅ Rectangular/Square |
3920.99.20.00 |
Other plastic sheets, films, foils, strip (non-cellular, not reinforced/laminated), flexible, other plastics | Packaging films, protective wraps, industrial liners, consumer goods | N/A | N/A | ✅ Flexible, flat |
3920.59.10.00 |
Plastic sheets, films, foils, strip (non-cellular, not reinforced/laminated), acrylic polymers, flexible | Transparent covers, signage, display panels, lenses, medical packaging | N/A | N/A | ✅ Flexible, flat |
🔍 Critical Insight:
- Aluminum alloy ≠ pure aluminum → Different HS Code
- "Not clad" means no surface coating (e.g., no PVC, no paint, no other metal layer)
- "Flexible" means it can bend without breaking → Key for plastic films
- "Rectangular/square" excludes circular, oval, or irregular shapes
💰 Three, 2026 Latest Tariff Breakdown (Including附加 Taxes & Policy Levies)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 (and onward)
🎯 1. 7606.12.30.96 — Aluminum Alloy Sheets (Rectangular, ≤6.3mm, Not Clad)
| Item | Detail |
|---|---|
| Base Duty | 3.0% (ad valorem) |
| Additional Tariff (USITC) | 0.0% |
| IEEPA Surcharge | 0.0% |
| Total Duty Rate | 3.0% |
| Tax Calculation | CIF Value × 3.0% |
| De Minimis Threshold | ✅ Yes (10% de minimis applies) |
| Legal Basis Path | 7606.12.30.96 → USITC:8524.11.10.00 (no additional footnotes) |
📌 Explanation:
- This is aluminum alloy, not pure aluminum → Higher base duty than pure Al
- No USITC or IEEPA surcharge → No extra 25% or 10%
- Only 3% total duty → Low-risk, high-efficiency clearance
- De minimis applies → If value ≤10% of total shipment, duty-free entry
🎯 2. 7606.11.30.60 — Pure Aluminum Sheets (Rectangular, ≤6.3mm, Not Clad)
| Item | Detail |
|---|---|
| Base Duty | 0.0% |
| Additional Tariff (USITC) | 0.0% |
| IEEPA Surcharge | 0.0% |
| Total Duty Rate | 0.0% |
| Tax Calculation | CIF Value × 0.0% |
| De Minimis Threshold | ✅ Yes (10% de minimis applies) |
| Legal Basis Path | 7606.11.30.60 → No footnotes or surcharges |
📌 Explanation:
- Pure aluminum → Exempt from most trade actions
- No additional tariffs → Zero duty
- Perfect for cost-sensitive shipments
- Can be cleared duty-free if under de minimis threshold
🎯 3. 3920.99.20.00 — Other Plastic Films/Sheets (Flexible, Non-Cellular, Not Laminated)
| Item | Detail |
|---|---|
| Base Duty | 0.0% |
| Additional Tariff (USITC) | 0.0% |
| IEEPA Surcharge | 0.0% |
| Total Duty Rate | 0.0% |
| Tax Calculation | CIF Value × 0.0% |
| De Minimis Threshold | ✅ Yes |
| Legal Basis Path | 3920.99.20.00 → No surcharges |
📌 Explanation:
- Generic plastic film (e.g., polyethylene, PP, PET) → Not specialty or high-tech
- No trade war impact → No 25% or 10% surcharges
- Zero duty → Ideal for packaging, protective covers, industrial wraps
🎯 4. 3920.59.10.00 — Acrylic Polymer Films/Sheets (Flexible, Non-Cellular)
| Item | Detail |
|---|---|
| Base Duty | 0.0% |
| Additional Tariff (USITC) | 0.0% |
| IEEPA Surcharge | 0.0% |
| Total Duty Rate | 0.0% |
| Tax Calculation | CIF Value × 0.0% |
| De Minimis Threshold | ✅ Yes |
| Legal Basis Path | 3920.59.10.00 → No surcharges |
📌 Explanation:
- Acrylic (PMMA) films → Used in signage, lenses, display covers
- Not subject to additional tariffs → Unlike some high-tech plastics
- Zero duty → Cost-effective for transparent, durable films
🛠️ Four, Customs Clearance Best Practices (Pro Tips to Avoid Delays)
✅ 1. Required Documentation (Must-Have List)
| Document | Required? | Why It Matters |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Shows material, thickness, dimensions, shape |
| ✅ Material Safety Data Sheet (MSDS) | ✔️ | For chemical compliance (especially plastics) |
| ✅ Product Photos (with dimensions) | ✔️ | Prove shape is rectangular/square, not circular |
| ✅ Commercial Invoice | ✔️ | Must state "Sheet", "Plate", or "Flexible Film" |
| ✅ Certificate of Origin (CO) | ✔️ | Needed for de minimis or preferential treatment |
| ✅ Third-Party Test Report (e.g., RoHS, REACH, FDA) | ✔️ | For plastics used in food, medical, or electronics |
| ✅ Packing List | ✔️ | Clarify quantity, weight, and packaging type |
✅ 2.申报技巧 (Key Rules to Remember)
🔥 "Shape Matters, Thickness Counts, Cladding Kills!"
| Scenario | Correct HS Code | Wrong Choice | Why It’s Wrong |
|---|---|---|---|
| Rectangular aluminum alloy sheet, ≤6.3 mm, not clad | 7606.12.30.96 |
7606.11.30.60 |
Wrong alloy → higher duty |
| Pure aluminum sheet, same shape & thickness | 7606.11.30.60 |
7606.12.30.96 |
Pure Al ≠ alloy → lower duty |
| Flexible plastic film, not laminated | 3920.99.20.00 |
3920.59.10.00 |
Not acrylic → wrong subcategory |
| Acrylic flexible film | 3920.59.10.00 |
3920.99.20.00 |
Must specify acrylic polymer |
✅ 3. Special Cases & How to Handle Them
| Situation | Recommended Action |
|---|---|
| Aluminum sheet with coating (e.g., paint, PVC) | ❌ Not "not clad" → Not eligible for these codes → May require different HS Code |
| Circular or irregular-shaped sheets | ❌ Not "rectangular" → Not eligible → May fall under 7606.19.90.00 (other) |
| Plastic sheets over 1 mm thick | ✅ Still eligible if flexible and non-laminated |
| Laminated or reinforced plastic | ❌ Not eligible → Must use 3920.61.00.00 or 3920.62.00.00 |
| Shipment under $800 (de minimis) | ✅ Duty-free entry if all items qualify |
🌍 Five, Global Market Comparison (2026)
| Country/Region | Recommended HS Code | Duty Rate | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 7606.12.30.96, 7606.11.30.60, 3920.99.20.00, 3920.59.10.00 |
0.0%–3.0% | FDA, RoHS, REACH | De minimis applies |
| 🇨🇳 China | Same | 5% (VAT + 0–3% customs) | CCC, RoHS | No extra tariffs |
| 🇪🇺 EU | Same | 0% (if CE compliant) | CE, REACH | No IEEPA/USITC |
| 🇦🇺 Australia | Same | 5% | RCM | No additional surcharges |
| 🇯🇵 Japan | Same | 0% | PSE | No extra tariffs |
📌 Takeaway:
- USA is the only market with a 3% duty on aluminum alloys
- All other markets are duty-free or low-duty
- Plastic films are universally low-risk
📌 Six, Common Mistakes & How to Avoid Them (Real-World Pitfalls)
❌ Mistake 1: Calling a flexible acrylic film a "plastic sheet" without specifying "acrylic"
👉 Result: Incorrect HS Code → Audit risk, penalties
❌ Mistake 2: Declaring clad aluminum (e.g., with PVC coating) under 7606.12.30.96
👉 Result: Invalid classification → Rejection or seizure
❌ Mistake 3: Shipment of circular aluminum sheets under "rectangular" code
👉 Result: Misdeclaration → Delayed clearance, fines
❌ Mistake 4: Not including product photos showing shape and dimensions
👉 Result: Customs can’t verify → Hold-up or return
✅ Correct Declaration Example:
"Aluminum Alloy Sheet, Rectangular, 5 mm Thick, 1000x2000 mm, Not Clad, HS: 7606.12.30.96"
"Flexible Acrylic Film, 0.2 mm Thick, 1000x1500 mm, Not Laminated, HS: 3920.59.10.00"
🎯 Seven, Conclusion: Precision Pays Off!
🎯 Remember the Golden Rules:
🔹 "Shape defines code, thickness sets duty, cladding breaks eligibility!"
🔹 "Pure Al = 0%, Alloy = 3%, Plastics = 0% — All under de minimis!"
🔹 "Photos + specs = fast clearance, no fines!"
📌 Pro Tip:
If your aluminum sheets are made in Vietnam, Mexico, Thailand, or Malaysia, you may qualify for IEEPA/USITC exemptions → 0% duty even on alloys.
🚀 Action Step:
🔹 Contact a customs broker
🔹 Submit product photos, specs, and invoice
🔹 Apply for HS Code pre-ruling (Advance Ruling) → Guarantee correct classification
📣 Ready to Ship?
📞 Get your HS Code confirmed today
🚛 Avoid delays, save costs, and ship with confidence!
✨ Smart Clearance Starts with Smart Classification!
💼 Your product’s future depends on the right HS Code.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.