补墙板
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8207504060 | 43.4% | CN | US | Official Doc |
| 7308909530 | 85.0% | CN | US | Official Doc |
| 4418919150 | 38.2% | CN | US | Official Doc |
| 3925200091 | 22.8% | CN | US | Official Doc |
| 3925900000 | 40.3% | CN | US | Official Doc |
| 6810990080 | 35.0% | CN | US | Official Doc |
AI Analysis
🏗️ Patching Wall Panels (Repair Wall Panels)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Patching Wall Panels"?
"Patching Wall Panels" (or Repair Wall Panels) are construction components used to repair, reinforce, or finish walls. In international trade, their classification depends heavily on material, form, and intended use. Based on common sense and market data, they are typically inferred as:
- Metal Thin Plates: Used for industrial or commercial wall cladding/repair.
- Drilling Tools/Attachments: If the product includes drilling bits for panel installation.
- Bamboo/Wood Panels: For interior decoration/repair.
- Plastic/Composite Panels: For bathroom/kitchen waterproofing or aesthetic repair.
- Cement/Concrete/Artificial Stone Panels: For exterior or heavy-duty structural repair.
⚠️ Key Distinction Point:
- If the product is metal, it falls under Chapter 73.
- If it is a tool (e.g., drill bits for panels), it falls under Chapter 82.
- If it is bamboo/wood, it falls under Chapter 44.
- If it is plastic/composite, it falls under Chapter 39.
- If it is cement/concrete, it falls under Chapter 68.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Material Inference | Total Tax |
|---|---|---|---|---|
7308.90.95.30 |
Structures (excluding prefabricated buildings) of iron or steel; plates, rods, angles, shapes, sections, tubes, and similar profiles... | Metal wall panels, steel plate repairs, industrial cladding | ✅ Metal (Iron/Steel) | 85.0% |
8207.50.40.60 |
Interchangeable tools for hand tools, whether or not power-operated, or for machine tools...; types for drilling... | Drill bits, cutting tools, or repair tools for wall panels | ✅ Metal/Composite Tool | 43.4% |
4418.91.91.50 |
Other builders' joinery or carpentry... | Bamboo wall panels, decorative bamboo repairs | ✅ Bamboo | 38.2% |
3925.20.00.91 |
Builders' ware of plastics, not elsewhere specified or included; doors, windows, and their frames and shutters... | Plastic wall panels, composite repair panels, waterproof panels | ✅ Plastic/Composite | 22.8% |
3925.90.00.00 |
Builders' ware of plastics, not elsewhere specified or included; other | Generic plastic wall panels (fallback category) | ✅ Plastic | 40.3% |
6810.99.00.80 |
Articles of cement, concrete, or artificial stone, not elsewhere specified or included | Cement/concrete wall panels, stone veneer repairs | ✅ Cement/Stone | 35.0% |
🔍 Key Reminder:
- Metal panels have the highest tax burden (85%) due to Section 232 tariffs.
- Plastic panels may have lower base taxes but can spike if misclassified.
- Tools are taxed differently than the materials themselves.
💰 III. 2026 Latest Tariff Rate Details (Including Surcharges, Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Time: November 10, 2025 (including subsequent imports)
🎯 1. 7308.90.95.30 —— Steel/Metal Wall Panels
| Item | Content |
|---|---|
| Base Tariff | 0% (ad valorem) |
| Section 232 Tariff (Steel/Aluminum) | +50% (10% + 50%? Note: Data says 50% total for 122 Clause Steel/Aluminum/Copper) |
| Section 301 Tariff | +25% |
| IEEPA Tariff | +10% |
| Total Rate | 85.0% |
| Tax Calculation | CIF Value × 85% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
| Legal Basis Path | USITC:7308.90.95.30 → FOOTNOTE:232 (Steel/Aluminum) → FOOTNOTE:301 → IEEPA:9903.01.24 |
📌 Explanation:
- Steel products are subject to Section 232 tariffs (national security), which can be 50% on top of other duties.
- Section 301 adds 25% for Chinese origin.
- IEEPA adds 10% for specific Chinese products.
- Total 85% is extremely high. This category is high-risk for de minimis shipments.
🎯 2. 8207.50.40.60 —— Drilling Tools for Wall Panels
| Item | Content |
|---|---|
| Base Tariff | 8.4% |
| Section 301 Tariff | +25% |
| IEEPA Tariff | +10% |
| Total Rate | 43.4% |
| Tax Calculation | CIF Value × 43.4% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | USITC:8207.50.40.60 → FOOTNOTE:301 → IEEPA:9903.01.24 |
📌 Note:
- If the product is a tool (e.g., drill bits), it does not fall under Section 232 (steel/aluminum products), so the 50% surcharge does not apply.
- However, the 25% Section 301 and 10% IEEPA still apply.
🎯 3. 4418.91.91.50 —— Bamboo Wall Panels
| Item | Content |
|---|---|
| Base Tariff | 3.2% |
| Section 301 Tariff | +25% |
| IEEPA Tariff | +10% |
| Total Rate | 38.2% |
| Tax Calculation | CIF Value × 38.2% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | USITC:4418.91.91.50 → FOOTNOTE:301 → IEEPA:9903.01.24 |
📌 Note:
- Bamboo products are not subject to Section 232.
- Base tax is low, but surcharges push it to 38.2%.
🎯 4. 3925.20.00.91 —— Plastic Wall Panels (Specific)
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| Section 301 Tariff | +7.5% (Note: Data says 7.5% for this specific code) |
| IEEPA Tariff | +10% |
| Total Rate | 22.8% |
| Tax Calculation | CIF Value × 22.8% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | USITC:3925.20.00.91 → FOOTNOTE:301 (7.5%) → IEEPA:9903.01.24 |
📌 Note:
- This is the lowest tax rate among the options (22.8%).
- Key Strategy: If your panel is made of plastic/composite, classify it here to save 60%+ in taxes compared to metal.
🎯 5. 3925.90.00.00 —— Plastic Wall Panels (General)
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| Section 301 Tariff | +25% |
| IEEPA Tariff | +10% |
| Total Rate | 40.3% |
| Tax Calculation | CIF Value × 40.3% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | USITC:3925.90.00.00 → FOOTNOTE:301 → IEEPA:9903.01.24 |
📌 Note:
- This is a fallback category for plastic builders' ware.
- Tax is higher (40.3%) than specific plastic codes (22.8%) due to the full 25% Section 301 surcharge.
🎯 6. 6810.99.00.80 —— Cement/Concrete Wall Panels
| Item | Content |
|---|---|
| Base Tariff | 0% |
| Section 301 Tariff | +25% |
| IEEPA Tariff | +10% |
| Total Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | USITC:6810.99.00.80 → FOOTNOTE:301 → IEEPA:9903.01.24 |
📌 Note:
- Cement/concrete products are not subject to Section 232.
- Base tax is 0%, making it cost-effective if surcharges are low.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
✅ 1. Preparation Checklist (Essential)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must include material (Metal, Plastic, Bamboo, Cement), dimensions, thickness, weight. |
| ✅ Material Certificate | ✔️ | Critical for Section 232 determination. If steel, prove it's not excluded. |
| ✅ Product Photos | ✔️ | Show the panel structure, edges, and any branding. |
| ✅ Commercial Invoice | ✔️ | Clearly state "Wall Panel for Repair" and Material Composition. |
| ✅ Packing List | ✔️ | Detail net/gross weight, number of panels per box. |
✅ 2. Declaration Tips (Key Mantra)
🔥 “Material First, Use Second, Name Accurate, Tax Lower!”
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Metal Panel | 7308.90.95.30 |
Call it "Decoration Item" → 85% Tax |
| Plastic Panel | 3925.20.00.91 |
Call it "Wood Panel" → 38.2% Tax |
| Tool/Drill Bit | 8207.50.40.60 |
Declare with Panel → Mixed Classification Error |
| Bamboo Panel | 4418.91.91.50 |
Declare as "Wood" → 38.2% vs 3.2% Base |
✅ 3. Special Cases Handling
| Situation | Handling Advice |
|---|---|
| Composite Panels (Metal+Plastic) | Declare based on essential character. If metal core, likely 7308. |
| Sample/Shipment under $800 | ❌ De Minimis Exemption Denied. All HS Codes listed have deny_de_minimis. |
| OEM Custom Panels | Provide client order + design specs. Avoid "generic" names. |
| Pre-fabricated vs. Simple Plates | 7308 covers both structures and plates. Clarify if it's a "structure" or "plate". |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Note |
|---|---|---|---|---|
| 🇺🇸 USA | 7308.90.95.30 (Metal) |
85.0% | None Specific | Highest Tax. Consider plastic alternatives. |
| 🇺🇸 USA | 3925.20.00.91 (Plastic) |
22.8% | None Specific | Lowest Tax. Best for compliance. |
| 🇨🇳 China | 7308.90.95.30 |
0% | CCC (if applicable) | No Section 301/IEEPA. |
| 🇪🇺 EU | 7308.90.95.30 |
0-5% | CE | No Section 232/301. |
📌 Conclusion:
- USA imposes heavy taxes on Chinese imports, especially Steel (85%).
- Plastic panels (22.8%) are the most cost-effective for US import.
- De Minimis ($800) exemption is NOT available for these categories.
📌 VI. Common Errors & Pitfalls (Lessons Learned)
❌ Error 1: Declaring Steel Panels as "Home Decor"
👉 Consequence: 85% Tax applied. Correct: 7308.90.95.30.
❌ Error 2: Declaring Plastic Panels as "Wood/Bamboo"
👉 Consequence: 38.2% Tax (vs 22.8% for plastic). Misclassification risk.
❌ Error 3: Assuming De Minimis ($800) applies
👉 Consequence: Goods detained/seized. All listed HS codes are excluded from de minimis.
❌ Error 4: Not specifying Material in Description
👉 Consequence: Customs may assign highest default rate or request additional documentation.
✅ Correct Practice:
"Wall Repair Panel, 4x8 ft, Galvanized Steel, for Interior Use, Model XYZ"
OR
"Wall Panel, PVC Composite, Waterproof, for Bathroom, Model ABC"
🎯 VII. Conclusion: Professional Declaration, Save Money, Clear Fast!
🎯 Remember the Mantra:
🔹 "Metal 85%, Plastic 22.8%, Bamboo 38.2%!"
🔹 "No De Minimis for These Codes!"
🔹 "Material Defines the Code, Code Defines the Tax!"
📌 Pro Tip:
If you can use Plastic/Composite Panels (3925.20.00.91) instead of Metal (7308.90.95.30), you can save 62.2% in taxes!
Consider supply chain adjustment to use non-metal materials where possible to avoid Section 232 tariffs.
📣 Immediate Action:
📞 Contact your customs broker + Provide Material Certificate + Confirm HS Code Pre-Ruling
🚀 Ensure your wall panels clear customs smoothly, reduce costs, and maximize profit!
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Every Penny of Your Cost Deserves Precise Calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.