Crankshaft Removal Tool
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 7326908688 | 87.9% | CN | US | 官方文档 |
| 8205591000 | 42.2% | CN | US | 官方文档 |
| 7326190080 | 87.9% | CN | US | 官方文档 |
| 8205595560 | 40.3% | CN | US | 官方文档 |
商品图片
AI分析
🔧 Crankshaft Removal Tool (Hand Tools & Mechanical Tools)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Crankshaft Removal Tools"?
A Crankshaft Removal Tool is a specialized instrument used in automotive and industrial maintenance to extract crankshafts from engines. In international trade, its classification depends heavily on material, specific function, and whether it is considered a "hand tool" or a general mechanical part.
Based on the provided data, there are three primary classification paths depending on the tool's specific design and material:
1. Hand Tools (8205 Series): If the tool is a simple lever, puller, or wrench designed for manual operation, it falls under "Hand Tools." 2. General Iron/Steel Articles (7326 Series): If the tool is a complex mechanical fixture, bracket, or part that doesn't fit specific hand tool descriptions, it may be classified as "Other articles of iron or steel." 3. Forged/Stamped Parts (7326 Series): If the tool is a basic forged or stamped component without further working, it may fall under "Other forged/stamped articles."
⚠️ Key Distinction Point:
- If the tool has a handle and is operated by hand → Hand Tools (8205).
- If the tool is a structural part or complex assembly without a dedicated handle → Iron/Steel Articles (7326).
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Material/Workmanship |
|---|---|---|---|
8205.59.10.00 |
Hand tools; spanners; wrenches; other hand tools; parts thereof | Manual crankshaft pullers, simple lever tools | Metal hand tools, functional consistency with pipe wrenches |
8205.59.55.60 |
Other hand tools | General hand-operated extraction tools | Iron or steel hand tools |
7326.90.86.88 |
Other articles of iron or steel; mechanical tools | Complex mechanical fixtures, non-hand-held tools | Iron/Steel, mechanical tool category |
7326.19.00.80 |
Other forged or stamped articles of iron or steel | Basic forged/stamped tool parts | Iron/Steel, forged/stamped, no further processing |
🔍 Important Reminder:
- Hand Tools (8205) generally have lower total tariffs compared to general steel articles due to specific exemptions or lower base rates, but they are subject to Section 301 tariffs. - General Steel Articles (7326) are often subject to the highest additional tariffs (Section 232 Steel/Aluminum duties + Section 301).
💰 III. 2026 Latest Tariff Rate Details (Including Additional Taxes)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: Current tariffs apply (Section 301 + Section 232)
🎯 1. 8205.59.10.00 —— Hand Tools (Manual Crankshaft Pullers)
| Item | Content |
|---|---|
| Base Tariff | 7.2% |
| Section 301 Additional Tariff | +25.0% |
| Total Rate | 42.2% |
| Tax Calculation | CIF Value × 42.2% |
| De Minimis Exemption | ❌ Not Available (Subject to Section 301) |
| Legal Basis Path | HTSUS 8205.59.10.00 → Section 301 Footnote |
📌 Explanation:
- This classification applies to tools that are clearly "hand tools" (e.g., wrenches, levers). - The 25% additional tariff is applied on top of the base 7.2%. - Total: 42.2%. This is the lowest tariff option among the listed codes.
🎯 2. 8205.59.55.60 —— Other Hand Tools
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| Section 301 Additional Tariff | +25.0% |
| Total Rate | 40.3% |
| Tax Calculation | CIF Value × 40.3% |
| De Minimis Exemption | ❌ Not Available |
| Legal Basis Path | HTSUS 8205.59.55.60 → Section 301 Footnote |
📌 Note:
- Slightly lower base rate (5.3%) than8205.59.10.00, resulting in a 40.3% total rate. - Suitable for general hand-operated tools that don't fit specific sub-categories like spanners.
🎯 3. 7326.90.86.88 —— Other Articles of Iron or Steel (Mechanical Tools)
| Item | Content |
|---|---|
| Base Tariff | 2.9% |
| Section 301 Additional Tariff | +25.0% |
| Section 232 Additional Tariff (Steel/Aluminum) | +50.0% |
| Total Rate | 87.9% |
| Tax Calculation | CIF Value × 87.9% |
| De Minimis Exemption | ❌ Not Available |
| Legal Basis Path | HTSUS 7326.90.86.88 → Section 232 & 301 |
📌 Warning:
- This classification triggers both Section 301 (25%) and Section 232 (50% for steel/aluminum). - Total: 87.9%. This is an extremely high tariff. Avoid this classification if possible.
🎯 4. 7326.19.00.80 —— Other Forged or Stamped Articles of Iron or Steel
| Item | Content |
|---|---|
| Base Tariff | 2.9% |
| Section 301 Additional Tariff | +25.0% |
| Section 232 Additional Tariff (Steel/Aluminum) | +50.0% |
| Total Rate | 87.9% |
| Tax Calculation | CIF Value × 87.9% |
| De Minimis Exemption | ❌ Not Available |
| Legal Basis Path | HTSUS 7326.19.00.80 → Section 232 & 301 |
📌 Warning:
- Same as above: 87.9% total rate due to dual additional tariffs (Steel/Aluminum). - Applies to tools that are classified as basic forged/stamped parts rather than finished hand tools.
🛠️ IV. Customs Clearance Practical Advice (Avoiding Pitfalls)
✅ 1. Recommended Strategy: Classify as Hand Tools
| Situation | Recommended HS Code | Total Rate | Reason |
|---|---|---|---|
| Manual Crankshaft Puller (with handle) | 8205.59.55.60 |
40.3% | Lowest tariff; clearly a hand tool |
| Simple Lever Tool | 8205.59.10.00 |
42.2% | Clearly a hand tool; slightly higher base rate |
| Complex Mechanical Fixture | 7326.90.86.88 |
87.9% | High tariff; avoid if possible |
| Basic Forged Part | 7326.19.00.80 |
87.9% | High tariff; avoid if possible |
🔥 Key Insight:
- Classifying as a "Hand Tool" (8205) saves you 45.7%–47.6% in tariffs compared to classifying as a "General Steel Article" (7326). - Evidence is Key: Provide photos showing the tool has a handle, is operated manually, and is not part of a larger machine.
✅ 2. Declaration Tips (Critical)
| Situation | Correct Declaration | Incorrect Declaration |
|---|---|---|
| Manual Puller | "Hand Tool: Crankshaft Removal Puller, Manual, Steel" | "Steel Part: Mechanical Tool" |
| Complex Fixture | "Mechanical Tool Part: Crankshaft Extraction Bracket" | "Hand Tool" (if it lacks a handle) |
| Forged Component | "Forged Steel Part: Crankshaft Support" | "Hand Tool" |
📌 Documentation Required:
- Product Photos: Clear images showing the tool’s structure, handles, and operation method. - User Manual: If available, extract pages showing manual operation. - Commercial Invoice: Clearly state "Hand Tool" for 8205 codes; avoid vague terms like "Machine Part" for hand tools.
✅ 3. Special Cases
| Situation | Advice |
|---|---|
| OEM Custom Tools | Provide design drawings to prove manual operation if claiming 8205. |
| Electric/Pneumatic Tools | If the tool requires power, it may not qualify as a "Hand Tool" under 8205; re-evaluate classification. |
| Set of Tools | If sold as a kit, declare the primary tool (usually the hand tool) as the main item. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Notes |
|---|---|---|---|
| 🇺🇸 USA | 8205.59.55.60 |
40.3% | Lowest US tariff for crankshaft tools |
| 🇪🇺 EU | 8205.59 | ~6.5% | No Section 301/232 duties |
| 🇨🇳 China | 8205.59 | ~5-7% | Low import duty for hand tools |
| 🇯🇵 Japan | 8205.59 | ~5% | No additional duties |
📌 Conclusion:
- USA is the most expensive market due to Section 301 and Section 232 tariffs. - EU, China, and Japan have much lower tariffs for hand tools. - Strategy: If exporting to the US, ensure your product is clearly marketed and documented as a Hand Tool to maximize tariff savings.
📌 VI. Common Mistakes & Pitfalls (Lessons Learned)
❌ Mistake 1: Declaring a manual puller as "Steel Part" (7326)
👉 Consequence: Tariff jumps from 40.3% to 87.9%.
Result: Significant cost increase, potential audit flag.
❌ Mistake 2: Using vague terms like "Mechanical Tool" without proof of hand operation
👉 Consequence: Customs may reclassify to 7326 with 87.9% tariff.
Result: Delays, penalties, and back taxes.
❌ Mistake 3: Ignoring Section 232 Steel/Aluminum Duties
👉 Consequence: If classified under 7326, 50% additional tariff applies.
Result: Total 87.9% tariff.
✅ Correct Approach:
"Manual Crankshaft Puller, Hand Tool, Steel, Model XYZ"
HS Code:8205.59.55.60
Tariff: 40.3%
🎯 VII. Conclusion: Smart Classification, Save Money!
🎯 Remember:
🔹 "Hand Tool? Use 8205. Pay 40%. Steel Part? Use 7326. Pay 88%."
🔹 "Photos Prove, Invoice Clarifies, Save Thousands."
📌 Pro Tip:
If your crankshaft tool is electric or pneumatic, it may fall under different HS codes (e.g., 8467). Re-evaluate your classification if it’s not a manual tool.
📣 Immediate Action:
📞 Consult a licensed customs broker.
📷 Provide clear photos of your tool.
📝 Ensure your commercial invoice says "Hand Tool".
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent Saved is Profit Gained!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。