Ethylene Polymer Mixture For Injection Molding
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3902900050 | 41.5% | CN | US | 官方文档 |
| 3902300000 | 41.5% | CN | US | 官方文档 |
| 3901101000 | 41.5% | CN | US | 官方文档 |
| 3901201000 | 41.5% | CN | US | 官方文档 |
| 3901101000 | 41.5% | CN | US | 官方文档 |
商品图片
AI分析
🧪 Ethylene Polymer Mixture for Injection Molding
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Understand "Ethylene Polymer Mixtures"?
Ethylene Polymer Mixture for Injection Molding refers to raw plastic materials primarily composed of ethylene units, designed for processing via injection molding machines. In international trade, these materials are classified under Chapter 39 (Plastics and Articles Thereof), specifically within the sub-heading for Polymers of Ethylene.
Despite the generic name "Mixture," customs classification depends heavily on the dominant polymer type and the physical form (usually primary forms like pellets, granules, or powders).
⚠️ Key Distinction Points:
- If the material is primarily Ethylene → Classify under Heading 3901.
- If the material is primarily Propylene or other olefins → Classify under Heading 3902.
- If the composition is complex/mixed without a single dominant olefin → May fall under 3902.90.
- Form Matters: All entries in the provided data specify "Primary Form" (pellets, granules, raw state), which is standard for injection molding feeds.
📦 II. HS Code Classification Details (Based on Provided Data)
| HS Code | Product Description | Application Scenario | Physical Form |
|---|---|---|---|
3902.90.00.50 |
Ethylene polymer mixture, for injection molding, classified under ethylene-type olefin polymers, primary form | Complex blends, non-specific olefin mixes | Primary Form (Pellets/Granules) |
3902.30.00.00 |
Ethylene polymer mixture, for injection molding, conforms to propylene or other olefin polymers category, primary form | Propylene-rich blends or specific olefin copolymers | Primary Form (Raw Shape) |
3901.10.10.00 |
Ethylene polymer mixture, for injection molding, material is ethylene polymer, primary form | Standard Polyethylene (PE) resins | Primary Form |
3901.20.10.00 |
Ethylene polymer mixture, for injection molding, material is ethylene polymer, pellet or raw material state | Pelletized Polyethylene for industrial use | Pellets/Raw Material |
3901.10.10.00 |
Ethylene polymer injection material, material is ethylene polymer, primary form | General PE injection molding grade | Primary Form |
🔍 Important Note:
- Although the product name suggests "Ethylene," codes under 3902 (Propylene/Other Olefins) are listed in the data. This implies the "Mixture" may contain significant propylene or other alpha-olefins, or the classification strategy allows flexibility based on specific supplier declarations.
- Do Not Split Shipments: If the goods are a homogeneous mixture, they must be declared under one HS code. Do not split into multiple lines to manipulate tariffs.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: Rates apply to imports from China
🎯 Unified Tariff Structure for All Listed Codes
According to the provided data, all listed HS codes share the exact same tax structure for Chinese-origin goods.
| Item | Detail |
|---|---|
| HS Codes Covered | 3902.90.00.50, 3902.30.00.00, 3901.10.10.00, 3901.20.10.00 |
| Basic Customs Duty (MFN) | 6.5% |
| Section 301 Surcharge (Additional Tariff) | 25.0% |
| Section 122 Tariff (IEEPA/Specific Clause) | 10.0% |
| Total Tax Rate | 41.5% |
| Tax Calculation | CIF Value × 41.5% |
| De Minimis Exemption | ❌ Not Eligible (These are bulk industrial raw materials, not de minimis shipments) |
📌 Explanation of Tax Components:
- Basic Duty (6.5%): The standard Most Favored Nation (MFN) tariff rate for plastics/polyethylene/propylene under the Harmonized Tariff Schedule (HTS).
- Section 301 Surcharge (25%): Imposed under US Trade Law Section 301 on goods from China, targeting industrial inputs like polymers.
- Section 122 Tariff (10%): A specific additional tariff clause (often related to national security or trade remedies under IEEPA) applied to this category.
- Total Burden: 41.5% is a high tariff burden. This significantly impacts cost competitiveness for US importers.
🛠️ IV. Clearance Operational Advice (Practical Pitfall Avoidance Guide)
✅ 1. Documentation Checklist (Mandatory)
| Document | Required | Description |
|---|---|---|
| ✅ Commercial Invoice | ✔️ | Must clearly state: "Ethylene Polymer Mixture for Injection Molding," CIF value, and HS Code. |
| ✅ Packing List | ✔️ | Detail net weight, gross weight, and package count (bags/pallets). |
| ✅ Certificate of Origin (CO) | ✔️ | Crucial: Must confirm Chinese origin to apply Section 301 & 122 correctly. |
| ✅ Product Specification Sheet | ✔️ | Must include: Polymer type (PE/PP), Melt Flow Index (MFI), density, and intended use (Injection Molding). |
| ✅ Material Safety Data Sheet (MSDS) | ✔️ | Required for chemical compliance and safe handling during customs inspection. |
| ✅ Bill of Lading (B/L) | ✔️ | Ensure commodity description matches invoice exactly. |
✅ 2. Declaration Tips (Key Mantras)
🔥 "Describe Accurately, Don't Hide Origins, Match the Code, Avoid Penalties!"
| Scenario | Correct Declaration | Incorrect Practice |
|---|---|---|
| Pure Polyethylene (PE) | 3901.10.10.00 or 3901.20.10.00 |
Misdeclaring as "Plastic Granules" under generic code → Risk of audit |
| Propylene/Olefin Mix | 3902.30.00.00 |
Forcing declaration into 3901 → Classification error |
| Complex Mixture | 3902.90.00.50 |
Ambiguous description "Plastic Mix" → Customs delay |
| OEM Private Label | Include Buyer Info + Supplier Info | Missing supplier details → Prohibited by US CBP for origin verification |
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| Multi-Component Blends | If the mixture contains >10% other non-olefin polymers, re-evaluate HS Code. If it’s still primarily olefin-based, current codes apply. |
| Colorants/Additives | If additives make up <5% by weight, classify by base polymer. If >5%, consult customs broker for potential reclassification. |
| Recycled Content | If using post-consumer recycled ethylene polymers, ensure documentation supports "Recycled" status if claiming any preferential treatment (though 41.5% likely still applies). |
| Free Trade Agreements (FTA) | ❌ No FTA Benefit: China is not part of US FTAs (like USMCA). No tariff reduction possible via FTA. |
🌍 V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 United States | 3901.10.10.00 / 3902.30.00.00 |
41.5% | None for plastics | High tariff burden; Section 301 & 122 apply |
| 🇨🇳 China | 3901.10.10.00 |
~1% - 6.5% | None | Low import duty for foreign polymers |
| 🇪🇺 European Union | 3901.10.90 |
~6.5% | REACH Registration | REACH compliance is mandatory for chemical substances |
| 🇯🇵 Japan | 3901.10.000 |
~0% - 6% | Food Safety (if applicable) | Generally lower tariffs than US |
| 🇻🇳 Vietnam | 3901.10.90 |
~0% - 5% | None | Potential for supply chain shift to avoid US tariffs |
📌 Conclusion:
- The US is the most expensive market for this product due to the 41.5% total tax rate.
- EU and Japan have significantly lower baseline tariffs.
- Strategic Suggestion: If targeting the US market, consider supply chain diversification (e.g., sourcing from Vietnam, Malaysia, or Middle East) to mitigate Section 301 duties, provided the Rules of Origin are met.
📌 VI. Common Errors & Pitfall Guide (Lessons Learned)
❌ Error 1: Declaring "Plastic Pellets" without specifying "Ethylene Polymer"
👉 Consequence: Customs may detain shipment for classification review → Delay & Storage Fees
❌ Error 2: Ignoring the "Section 122" and "301" surcharges in cost calculation
👉 Consequence: Under-quoting CIF value → Budget Overrun & Profit Loss
❌ Error 3: Using generic "Polymer" in the description
👉 Consequence: CBP may assess highest possible duty rate → Audit Risk
❌ Error 4: Claiming FTA benefit for Chinese goods
👉 Consequence: Penalty & Fraud Accusations → China has no US FTA.
✅ Correct Practice:
"Ethylene Copolymer Resin, Injection Molding Grade, Pellets, 1000 Bags, Origin: China, HS: 3901.10.10.00"
🎯 VII. Conclusion: Professional Declaration, Save Costs, Ensure Compliance
🎯 Remember the Mantra:
🔹 "41.5% is the number, 301 & 122 are the traps, Don't split the shipment, Origin is the key!"
🔹 "HS Code determines tax, 41.5% is steep, Declare honestly, sleep at night!"
📌 Pro Tip:
If your polymer mixture is not exclusively from China (e.g., blended with US-sourced or third-country material), consult a customs attorney for substantial transformation rules. However, if 100% Chinese, the 41.5% rate is mandatory.
📣 Immediate Action:
📞 Contact a licensed US Customs Broker
📤 Provide Product Spec Sheet + MSDS
📊 Calculate Landed Cost with 41.5% Duty before placing orders
✨ Professional Clearance Starts with Precise Classification!
💼 Every cent of tax is a cent of profit lost—optimize your supply chain today!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。