Ethylene Polymer Rods
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3916100000 | 40.8% | CN | US | 官方文档 |
| 3916905000 | 40.8% | CN | US | 官方文档 |
| 3917390000 | 0.0% | CN | US | 官方文档 |
| 3917310000 | 38.1% | CN | US | 官方文档 |
商品图片
AI分析
🧪 Ethylene Polymer Rods (Plastic Profiles)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Breakdown | Strategic Entry Strategy
📌 Part 1: Product Definition & Classification: Do You Know "Ethylene Rods"?
Ethylene Polymer Rods refer to semi-finished plastic products made primarily from polyethylene (PE). In international trade, they are categorized not just by shape, but by cross-sectional dimensions and processing status. These are not finished goods but raw materials for further manufacturing (e.g., machining into gears, bushings, or structural components).
Key Distinction:
- Monofilaments/Rods >1mm: Classified under Chapter 39 (Plastics and Articles Thereof), specifically heading 3916.
- Polyethylene Specifics: Ethylene polymers (PE) often enjoy 0% basic duty, but classification depends on whether they are "simple forms" (rods/sticks) or more complex profiles.
⚠️ Critical Classification Point:
- If the cross-sectional dimension exceeds 1 mm and is in simple forms (rods, sticks, profile shapes), it falls under 3916.
- If it is a pipe/tube with fittings or more complex plastic articles, it may fall under 3917.
- Do not confuse with chemical intermediates (Chapter 29) or finished plastic articles (Chapter 39.40+).
📦 Part 2: HS Code Classification Matrix (2026 Latest Tariff Authority)
Based on the provided data, here are the precise HS Codes for Ethylene Polymer Rods/Profiles:
| HS Code | Product Description | Key Criteria | Status |
|---|---|---|---|
3916.10.00.00 |
Monofilament/Rods of Polymers of Ethylene | Cross-sectional dimension >1 mm; rods, sticks, profile shapes; surface-worked but not otherwise worked | ✅ Primary Match |
3916.90.50.00 |
Of Other Plastics | If the product is not polyethylene (e.g., PVC, PP, ABS) or doesn't meet specific PE criteria | ⚠️ Alternative for non-PE |
3917.31.00.00 |
Rods/Profiles of Polyethylene (Ethylene Polymers) | Not elsewhere specified; distinct from simple monofilament/rod forms if applicable | ✅ Specific PE Match |
3917.39.00.00 |
Rods/Profiles of Ethylene Polymers (NES) | General category for ethylene polymer profiles not covered by 3917.31 | ❓ Uncertain Tax |
🔍 Analysis of Codes:
-3916.10.00.00is the most common classification for polyethylene rods/sticks with dimensions >1mm.
-3917.31.00.00is also a valid code for polyethylene rods/profiles, particularly if they are considered "plastic tubes, pipes, and hoses" or specific profile shapes under Chapter 3917.
- Avoid3917.39.00.00if possible, as tax information is flagged as "Error/Failed to retrieve," creating compliance risk.
💰 Part 3: 2026 Tariff Rate Breakdown (Detailed Tax Clauses)
✅ Applicable Country: United States (US)
✅ Origin: China (CN) – Assumed based on typical trade context; verify if other origins apply
✅ Effective Time: 2025–2026 Tariff Schedule
🎯 1. 3916.10.00.00 —— Monofilament/Rods of Polymers of Ethylene
| Item | Detail |
|---|---|
| Basic Tariff | 0.0% (ad valorem) |
| Section 301 Surcharge | 0.0% (Note: Many plastic raw materials are exempt or have low rates under current exclusions, but verify latest USITC lists) |
| IEEPA Surcharge | 0.0% (No additional national security tariff indicated for this HS) |
| Total Effective Tax Rate | 0.0% |
| Tax Calculation | CIF Value × 0% = $0 |
| De Minimis Eligibility | ✅ Yes (If value < $800) |
| Legal Basis | HTSUS 3916.10.00.00 |
📌 Explanation:
- Polyethylene rods (monofilaments/profiles) are often classified as basic plastic materials with 0% duty.
- Crucially: Unlike electronics or steel, many plastic semi-finished goods do not attract the 25% Section 301 tariff, provided they are not manufactured in China under specific exclusions.
- Always verify if the specific product is listed in the USITC Exclusion List for plastics.
🎯 2. 3916.90.50.00 —— Of Other Plastics (Non-Ethylene)
| Item | Detail |
|---|---|
| Basic Tariff | 0.0% |
| Surcharges | 0.0% |
| Total Effective Tax Rate | 0.0% |
| Note | Applies to non-PE plastics (e.g., PVC, PP) in rod form. Same low-tax treatment. |
🎯 3. 3917.31.00.00 —— Rods/Profiles of Polyethylene
| Item | Detail |
|---|---|
| Basic Tariff | 0.0% |
| Surcharges | 0.0% |
| Total Effective Tax Rate | 0.0% |
| Note | Confirms 0% duty for polyethylene profiles under Chapter 3917. |
⚠️ 3. 3917.39.00.00 —— Rods/Profiles of Ethylene Polymers (NES)
| Item | Detail |
|---|---|
| Tax Status | Error / Failed to Retrieve |
| Risk Level | 🔴 High |
| Action Required | Do not use this code for clearance without prior customs ruling. It may have hidden duties or restrictions. |
🛠️ Part 4: Customs Clearance Practical Advice (Avoid Pitfalls)
✅ 1. Essential Documentation Checklist
| Document | Required? | Purpose |
|---|---|---|
| Commercial Invoice | ✅ Yes | Clearly state: "Polyethylene Rods, HS 3916.10.00.00" |
| Packing List | ✅ Yes | Detail gross/net weight, dimensions |
| Product Specification Sheet | ✅ Yes | Include: Material (HDPE/LLDPE/PP), Density, Melt Index, Diameter/Thickness |
| Certificate of Origin | ✅ Yes | If claiming preferential treatment (e.g., from non-China origins) |
| Customs Ruling (Advance) | 🟡 Recommended | To confirm 3916.10.00.00 vs 3917.31.00.00 |
✅ 2. Declaration Tips (Key Mnemonic)
🔥 "Raw Plastic Rods: 0% Duty, But Be Specific!"
| Scenario | Correct Declaration | Common Error | Consequence |
|---|---|---|---|
| Polyethylene Rods (>1mm) | 3916.10.00.00 |
Declaring as "Plastic Pipes" (3917.39) |
Risk of 0% tax retrieval error or misclassification |
| Other Plastic Rods (e.g., PP) | 3916.90.50.00 |
Declaring as "Ethylene Polymers" | Misdeclaration, potential penalties |
| Finished Plastic Parts | 3926.90.97 (or similar) |
Declaring as "Rods" (3916) |
Higher duty rates, incorrect classification |
| Chemical Polyethylene Pellets | 3902.10.00.00 |
Declaring as "Rods" (3916) |
Wrong chapter, delay |
📌 Key Rule:
- Chapter 3916 covers "Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks, and profile shapes, whether or not surface-worked but not otherwise worked."
- Do not declare machined parts (e.g., gears, bearings) as rods. They fall under 3926 (Other articles of plastics).
✅ 3. Special Cases & Risk Mitigation
| Scenario | Handling Strategy |
|---|---|
| Mixed Materials | If rods contain >5% filler (e.g., glass fiber), still classify under 3916 if base material is plastic, but declare composition. |
| Surface-Treated Rods | "Surface-worked" (e.g., polished, painted) is still allowed under 3916 if not otherwise worked (e.g., not machined into a final product). |
Uncertain Tax Code (3917.39.00.00) |
Avoid this code. Use 3916.10.00.00 or 3917.31.00.00 which have confirmed 0% rates. |
| China Origin | Verify if the specific HS Code is exempt from Section 301 tariffs. Most plastic rods are exempt, but check the latest USITC exclusion list. |
🌍 Part 5: Global Market Comparison (2026)
| Market | Recommended HS Code | Tariff Rate | Notes |
|---|---|---|---|
| 🇺🇸 USA | 3916.10.00.00 |
0% | Verify Section 301 exemption. |
| 🇪🇺 EU | 3916.10.00 |
0% | Standard EU tariff for plastic rods. |
| 🇨🇳 China | 3916.10.00 |
5-7% | Import duty for ethylene rods. |
| 🇬🇧 UK | 3916.10.00 |
0% | Post-Brexit tariff rate. |
📌 Conclusion:
- USA & EU are favorable with 0% duty on ethylene polymer rods.
- China imposes a small import duty (~5-7%).
- Always confirm Section 301 status for US imports from China.
📌 Part 6: Common Mistakes & Pitfalls (Lessons Learned)
❌ Mistake 1: Declaring machined plastic parts (e.g., cut-to-size gears) as "Rods" (3916)
👉 Consequence: Misclassification. Should be 3926.90.97 (Other plastic articles). Potential duty increase and penalties.
❌ Mistake 2: Using 3917.39.00.00 without verification
👉 Consequence: "Failed to retrieve tax info" may mask higher duties or compliance flags. Always use 3916.10.00.00 or 3917.31.00.00 for PE rods.
❌ Mistake 3: Ignoring Section 301 Exclusions
👉 Consequence: Even if basic duty is 0%, an unexcluded 301 tariff (25%) could apply. Check USITC Exclusion List.
❌ Mistake 4: Declaring polymer pellets as "Rods"
👉 Consequence: Wrong chapter (3902 vs 3916). Leads to detention.
✅ Correct Declaration Example:
"Polyethylene (HDPE) Rods, Diameter 50mm, Length 1m, Surface Polished, HS Code 3916.10.00.00, Origin: China"
🎯 Part 7: Conclusion: Smart Classification Saves Money!
🎯 Remember This Rule:
🔹 "Rod >1mm = 3916, PE = 0% Duty, Avoid 3917.39!"
🔹 "Surface work is okay, but no machining into final products!"
🔹 "Check 301 Exclusions for China origin!"
📌 Pro Tip:
If your polyethylene rods are not from China, you can confidently use 3916.10.00.00 with 0% duty globally.
For China-origin goods, verify the latest USITC Exclusion List for plastic rods to ensure 0% total duty.
📣 Immediate Action:
📞 Consult a customs broker + Submit an Advance Ruling if unsure between
3916.10.00.00and3917.31.00.00.
🚀 Clear your ethylene rods with 0% duty and zero surprises!
✨ Professional Classification Starts Here!
💼 Every rod counts, every cent matters!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。