Fingerless Rubber Coated Gloves
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 4015129000 | 49.0% | CN | US | 官方文档 |
| 3926201020 | 10.0% | CN | US | 官方文档 |
| 3926204010 | 16.5% | CN | US | 官方文档 |
| 6307909875 | 24.5% | CN | US | 官方文档 |
| 6307909891 | 24.5% | CN | US | 官方文档 |
商品图片
AI分析
🧤 Fingerless Rubber Coated Gloves: The Ultimate HS Code & Tariff Guide | 2026 Customs Clearance Strategy
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Compliance Strategy
📌 Part 1: Product Definition & Classification – Do You Really Know "Fingerless Rubber Coated Gloves"?
Fingerless rubber-coated gloves are versatile protective gear used in construction, automotive repair, industrial maintenance, and light medical scenarios. They combine the dexterity of fingerless designs with the grip and protection of rubber/synthetic coatings.
In international trade, they are not a single unified category. They are split based on material composition (textile vs. plastic/synthetic) and specific chemical composition (natural rubber vs. synthetic). Misclassification can lead to massive tariff discrepancies (up to 45% difference!).
⚠️ Key Distinction Points:
- If the base material is cotton/textile and the coating is vulcanized rubber → It falls under Chapter 40 (Rubber).
- If the base material is fiber/textile but classified as a general "made-up article" without specific rubber heading preference → It may fall under Chapter 63 (Other Made-Up Textile Articles).
- If the coating is plastic/synthetic polymer (not classified as "rubber" under Chapter 40 definitions) → It falls under Chapter 39 (Plastics).
📦 Part 2: HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the exact HS Codes and their corresponding tax structures. We will analyze why each applies.
| HS Code | Product Description | Material/Base | Why This Code Applies? |
|---|---|---|---|
4015.12.90.00 |
Rubber-coated cotton gloves, vulcanized rubber, for medical or protective use | Cotton + Vulcanized Rubber | Specifically covers "Gloves, gauntlets and mittens, of vulcanized rubber other than hard rubber," including those coated on textile bases (cotton). This is the most accurate for traditional rubber-coated work gloves. |
3926.20.10.20 |
Coated gloves, plastic/synthetic coating | Plastic/Synthetic Polymer | Falls under "Articles of plastics... gloves." Used if the coating is technically classified as plastic (e.g., PVC, PU) rather than "vulcanized rubber" under Chapter 40. |
3926.20.40.10 |
Coated gloves, plastic/synthetic material | Plastic/Synthetic Material | Similar to above, but different sub-heading for specific plastic compositions or types of coated articles. |
6307.90.98.75 |
Fiber fingerless gloves, other made-up articles | Fiber/Textile (General) | If the product is deemed a "fingerless glove" primarily as a textile article, and the coating doesn't change its essential character to "rubber glove," it may fall here. Often used for fashion/light utility fiber gloves with minor coating. |
6307.90.98.91 |
Fiber fingerless gloves, other made-up articles | Fiber/Textile (General) | Another sub-heading for "Other made-up articles" under Chapter 63, for fiber-based fingerless gloves. |
🔍 Critical Reminder:
-4015.12.90.00has the highest tax burden due to being classified as a "rubber" product subject to multiple surcharges.
-3926.20.10.20has the lowest base tax (0%) but is still subject to IEEPA surcharges.
-6307.90.98.xxare classified as "other made-up textile articles," which may be subject to different duty rates but still incur high surcharges.
💰 Part 3: 2026 Latest Tariff Rate Breakdown (Including Surcharges, Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Ongoing (including post-Nov 2025 imports)
🎯 1. 4015.12.90.00 —— Rubber-Coated Cotton Gloves (Vulcanized Rubber)
| Item | Content |
|---|---|
| Base Tariff Rate | 14.0% |
| Section 301 Surcharge | +25.0% |
| IEEPA Surcharge | +10.0% (China/HK origin) |
| Total Tax Rate | 49.0% |
| Tax Calculation | CIF Value × 49% |
| De Minimis Eligibility | ❌ No (High risk of seizure if under $800) |
| Legal Basis Path | USITC:4015.12.90.00 → 301:Footnote 9903.01.24 → IEEPA:9903.01.25 |
📌 Explanation:
- This code is classified under Chapter 40 (Rubber), which is heavily targeted by US trade policies.
- The 49% total rate makes this the most expensive option for importers.
- Must ensure the product is indeed "vulcanized rubber" to justify this code; misclassification can lead to penalties.
🎯 2. 3926.20.10.20 —— Coated Gloves (Plastic/Synthetic)
| Item | Content |
|---|---|
| Base Tariff Rate | 0.0% |
| Section 301 Surcharge | 0.0% |
| IEEPA Surcharge | +10.0% |
| Total Tax Rate | 10.0% |
| Tax Calculation | CIF Value × 10% |
| De Minimis Eligibility | ❌ No (Still subject to IEEPA) |
| Legal Basis Path | USITC:3926.20.10.20 → IEEPA:9903.01.25 |
📌 Note:
- Lowest total tariff among the options.
- Suitable if the coating is technically plastic (e.g., PVC, PU) rather than rubber.
- Requires careful material declaration to avoid being reclassified as rubber (4015).
🎯 3. 3926.20.40.10 —— Coated Gloves (Plastic/Synthetic Material)
| Item | Content |
|---|---|
| Base Tariff Rate | 6.5% |
| Section 301 Surcharge | 0.0% |
| IEEPA Surcharge | +10.0% |
| Total Tax Rate | 16.5% |
| Tax Calculation | CIF Value × 16.5% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | USITC:3926.20.40.10 → IEEPA:9903.01.25 |
📌 Note:
- Mid-range option.
- Applies to specific plastic-coated glove types.
- Still significantly cheaper than the rubber classification (4015).
🎯 4. & 5. 6307.90.98.75 & 6307.90.98.91 —— Fiber Fingerless Gloves (Textile)
| Item | Content |
|---|---|
| Base Tariff Rate | 7.0% |
| Section 301 Surcharge | +7.5% |
| IEEPA Surcharge | +10.0% |
| Total Tax Rate | 24.5% |
| Tax Calculation | CIF Value × 24.5% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | USITC:6307.90.98.xx → 301:Footnote 9903.88.01 → IEEPA:9903.01.25 |
📌 Note:
- Classified as textile articles, not rubber or plastic.
- Suitable for fingerless gloves where the fiber base is dominant.
- Higher base tax than plastic (3926), but lower than rubber (4015).
🛠️ Part 4: Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
✅ 1. Documentation Checklist (Non-Negotiable)
| Document | Required | Notes |
|---|---|---|
| ✅ Product Spec Sheet | ✔️ | Must clearly state: Base material (Cotton/Fiber/Plastic), Coating material (Vulcanized Rubber/PVC/PU), Fingerless design |
| ✅ Material Composition Report | ✔️ | Lab test confirming % of rubber vs. textile vs. plastic |
| ✅ Product Photos | ✔️ | Show cross-section if possible, label, and fingerless design |
| ✅ Commercial Invoice | ✔️ | Use precise description: e.g., "Fingerless Gloves, Cotton Base, PVC Coating" NOT just "Gloves" |
| ✅ Packing List | ✔️ | Detail weight, dimensions, and quantity |
| ✅ Certificate of Origin | ✔️ | For verifying China origin and applying correct IEEPA rates |
✅ 2. Declaration Tips (Key Mnemonics)
🔥 “Material Dictates Code, Code Dictates Cost!”
| Scenario | Correct HS Code | Risk if Wrong |
|---|---|---|
| Cotton base + Vulcanized Rubber | 4015.12.90.00 (49%) |
If declared as plastic → Severe penalty for misdeclaration |
| Fiber base + PVC/PU Coating | 3926.20.10.20 (10%) |
If declared as rubber → Overpayment of 39% |
| Fiber base + Light Coating (Textile dominant) | 6307.90.98.75 (24.5%) |
If declared as plastic → 14.5% underpayment → Audit risk |
| Plastic base + Plastic Coating | 3926.20.40.10 (16.5%) |
If declared as rubber → 32.5% overpayment |
✅ 3. Special Handling Cases
| Case | Handling Advice |
|---|---|
| Mixed Materials | If glove has rubber fingers and fabric palm, consult a customs broker. Likely 4015 if rubber is essential character. |
| Medical vs. Industrial | 4015.12.90.00 mentions "medical or protective." If for medical use, ensure compliance with FDA if applicable, but tariff remains same. |
| Fingerless Design | Critical for 6307 codes. If full-fingered, 6307 may not apply. Ensure description explicitly states "Fingerless." |
| Origin Marking | Must be "Made in China." Failure to mark properly can lead to additional duties under 19 U.S.C. § 1304. |
🌍 Part 5: Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Est. Total Duty | Notes |
|---|---|---|---|
| 🇺🇸 USA | Varies by material (see above) | 10% – 49% | Highest complexity due to Section 301 & IEEPA. |
| 🇨🇳 China | Varies | ~5-10% | Lower duties, but imports into China have different rules. |
| 🇪🇺 EU | 4015 or 3926 |
~4-7% | No equivalent to US Section 301 surcharges. |
| 🇬🇧 UK | 4015 or 3926 |
~4-6% | Post-Brexit tariffs similar to EU but independent. |
| 🇨🇦 Canada | 4015 or 3926 |
~0-6% | CUSMA may apply for US-origin goods, not CN. |
📌 Conclusion:
- USA is the most challenging market due to layered surcharges.
- Material declaration is critical. A 0.5% difference in rubber vs. plastic classification can save thousands of dollars per container.
📌 Part 6: Common Mistakes & Pitfalls (Lessons Learned)
❌ Mistake 1: Calling all coated gloves "Rubber Gloves"
👉 Consequence: If made of PVC, you pay 49% instead of 10%. Overpayment!
❌ Mistake 2: Ignoring "Fingerless" in description
👉 Consequence: If declared as "Gloves" without specifying "Fingerless," customs may classify under broader, higher-tariff categories.
❌ Mistake 3: Assuming "Coated" means "Plastic"
👉 Consequence: If coating is natural rubber, it must go under 4015. Misclassification leads to back taxes and penalties.
✅ Correct Practice:
"Fingerless Gloves, Cotton Base, PVC Coating, Industrial Use, Model XYZ, China Origin"
🎯 Part 7: Conclusion – Professional Declaration, Save Time & Money!
🎯 Remember the Motto:
🔹 "Material is King, Code is Queen, Tariff is the Throne!"
🔹 "One small classification error can cost you 39% in tariffs!"
📌 Pro Tip:
If your gloves are originating from Vietnam, Thailand, or Malaysia, you may qualify for IEEPA exemptions or lower rates under FTAs.
Recommend Advance Ruling from CBP to lock in the HS Code and avoid post-clearance audits.
📣 Immediate Action:
📞 Contact a licensed customs broker.
📸 Provide high-res photos and material composition sheets.
🚀 Get a Pre-Ruling from CBP before shipping.
✨ Professional Clearance Starts with Precise Classification!
💼 Every Dollar of Tariff Saved is Pure Profit!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。