Long Rubber Gloves
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 4006905000 | 37.7% | CN | US | 官方文档 |
| 4015191110 | 38.0% | CN | US | 官方文档 |
| 4015195100 | 49.0% | CN | US | 官方文档 |
| 3926201020 | 10.0% | CN | US | 官方文档 |
| 3926204010 | 16.5% | CN | US | 官方文档 |
| 3926204050 | 16.5% | CN | US | 官方文档 |
商品图片
AI分析
🧤 Long Rubber Gloves (加厚橡胶手套)
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 1. Product Definition & Classification: Do You Truly Understand "Long Rubber Gloves"?
Long rubber gloves are protective wear primarily used in industrial, medical, or household cleaning scenarios. In international trade, they are classified based on their material state (vulcanized vs. unvulcanized) and composition (rubber vs. plastic). This distinction is critical because it determines whether the product falls under Chapter 40 (Rubber) or Chapter 39 (Plastics), leading to vastly different tariff rates.
⚠️ Key Distinction Point:
- If the material is Unvulcanized Rubber (uncured, soft, pliable before final curing) → Classify under 4006.90.50.00
- If the material is Vulcanized Rubber (cured, elastic, finished product) → Classify under 4015.19.11.10 / 4015.19.51.00
- If the material is Plastic (even if called "rubber-like") → Classify under 3926.20.10.20 / 3926.20.40.10 / 3926.20.40.50
📦 2. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
| HS Code | Product Description | Applicable Scenario | Material State |
|---|---|---|---|
4006.90.50.00 |
Thickened rubber gloves, made of rubber, form of gloves, falls under other categories of unvulcanized rubber products | Unvulcanized industrial gloves, raw material state | ❌ Unvulcanized |
4015.19.11.10 |
Plastic/rubber gloves, material is vulcanized rubber, purpose is gloves, form matches | Finished vulcanized rubber gloves (general) | ✅ Vulcanized |
4015.19.51.00 |
Plastic/rubber gloves, material is vulcanized rubber or synthetic rubber, purpose is gloves, reasonable inference | Finished vulcanized synthetic/rubber gloves | ✅ Vulcanized |
3926.20.10.20 |
Plastic gloves, material is plastic, form is gloves, no clear purpose, judged as fallback category | Generic plastic gloves | ✅ Plastic (Plastic) |
3926.20.40.10 |
Plastic gloves, material is plastic, form is gloves, meets plastic product and glove use characteristics | Specific plastic gloves with clear use | ✅ Plastic (Plastic) |
3926.20.40.50 |
Rubber agricultural gloves, material is rubber, purpose is gloves, classification logic consistent with plastic products due to specific agricultural use | Agricultural gloves classified similarly to plastics | ✅ Rubber (Agri-Logic) |
🔍 Important Reminder:
- "Rubber" vs. "Plastic": Even if the product is called "Rubber Gloves," if it is made of synthetic polymer resins (plastics), it may fall under Chapter 39. The key is the chemical composition and manufacturing process. - Vulcanization Status: Unvulcanized rubber (4006) has different duty structures compared to finished vulcanized goods (4015).
💰 3. 2026 Latest Tariff Rate Breakdown (Including Surtaxes, Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: 2025 November 10 onwards (for subsequent imports)
🎯 1. 4006.90.50.00 —— Thickened Rubber Gloves (Unvulcanized)
| Item | Content |
|---|---|
| Base Tariff | 2.7% (ad valorem) |
| Section 301 Surtax | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Tariff | 37.7% |
| Tax Calculation | CIF Value × 37.7% |
| De Minimis Eligibility | ❌ Not Eligible (deny_de_minimis) |
| Legal Basis Path | Base Tariff: 2.7% → Section 301: 25.0% → Section 122: 10.0% |
📌 Explanation:
- This classification applies if the gloves are made of unvulcanized rubber.
- The 37.7% total rate is high due to the combination of base tariff and multiple surtaxes.
- Must be declared as "Unvulcanized" to qualify.
🎯 2. 4015.19.11.10 —— Vulcanized Rubber Gloves
| Item | Content |
|---|---|
| Base Tariff | 3.0% |
| Section 301 Surtax | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Tariff | 38.0% |
| Tax Calculation | CIF Value × 38.0% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Base Tariff: 3.0% → Section 301: 25.0% → Section 122: 10.0% |
📌 Note:
- Applies to vulcanized rubber gloves.
- Total rate 38.0%. Slightly higher than 4006 due to higher base tariff.
🎯 3. 4015.19.51.00 —— Vulcanized Synthetic/Rubber Gloves
| Item | Content |
|---|---|
| Base Tariff | 14.0% |
| Section 301 Surtax | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Tariff | 49.0% |
| Tax Calculation | CIF Value × 49.0% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Base Tariff: 14.0% → Section 301: 25.0% → Section 122: 10.0% |
📌 Critical Warning:
- This is the highest rate among rubber classifications.
- Applies if the gloves are vulcanized synthetic rubber or specific rubber blends not covered by 4015.19.11.10.
- Avoid misclassification to prevent paying 49% instead of 38% or 37.7%.
🎯 4. 3926.20.10.20 —— Plastic Gloves (Fallback Category)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surtax | 0.0% |
| Section 122 Tariff | +10.0% |
| Total Tariff | 10.0% |
| Tax Calculation | CIF Value × 10.0% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Base Tariff: 0.0% → Section 301: 0.0% → Section 122: 10.0% |
📌 Opportunity:
- If the gloves are made of plastic (e.g., PVC, PE) and do not have a specific agricultural use, this is the most cost-effective option.
- Total rate is only 10.0%.
- Must confirm material is truly plastic, not rubber.
🎯 5. 3926.20.40.10 —— Plastic Gloves (Specific Use)
| Item | Content |
|---|---|
| Base Tariff | 6.5% |
| Section 301 Surtax | 0.0% |
| Section 122 Tariff | +10.0% |
| Total Tariff | 16.5% |
| Tax Calculation | CIF Value × 16.5% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Base Tariff: 6.5% → Section 301: 0.0% → Section 122: 10.0% |
📌 Note:
- Applies to plastic gloves with specific characteristics matching this subheading.
- Total rate 16.5%. Still significantly lower than rubber categories.
🎯 6. 3926.20.40.50 —— Rubber Agricultural Gloves (Plastic Logic)
| Item | Content |
|---|---|
| Base Tariff | 6.5% |
| Section 301 Surtax | 0.0% |
| Section 122 Tariff | +10.0% |
| Total Tariff | 16.5% |
| Tax Calculation | CIF Value × 16.5% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Base Tariff: 6.5% → Section 301: 0.0% → Section 122: 10.0% |
📌 Special Case:
- Even though the material is rubber, if it is for agricultural use, it is classified under the plastic chapter (39) for tariff purposes.
- Total rate 16.5%.
- Must provide proof of agricultural use to qualify.
🛠️ 4. Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
✅ 1. Preparation Checklist (No Exceptions)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must specify material (Vulcanized/Unvulcanized/Rubber/Plastic), thickness, length |
| ✅ Material Composition Certificate | ✔️ | Critical for distinguishing between Rubber (Ch.40) and Plastic (Ch.39) |
| ✅ Product Photos (Including Label) | ✔️ | Clear view of "Made of..." label, texture, and any "Agricultural Use" markings |
| ✅ Third-Party Test Report | ✔️ | Material analysis report (e.g., FTIR test) to confirm polymer type |
| ✅ Commercial Invoice | ✔️ | Must accurately describe goods as "Long Rubber Gloves" or "Plastic Gloves" per classification |
| ✅ Packing List | ✔️ | Detail unit weight and package dimensions |
✅ 2. Declaration Strategy (Key Mnemonic)
🔥 "Material is King, Use is Queen, Tax Rate Varies Wildly!"
| Scenario | Correct HS Code | Mistake to Avoid |
|---|---|---|
| Unvulcanized Rubber Gloves | 4006.90.50.00 |
Mistake: Declare as Vulcanized → Pay 38% instead of 37.7% (Small diff, but accuracy matters) |
| Vulcanized Rubber Gloves (General) | 4015.19.11.10 |
Mistake: Declare as Synthetic → Pay 49% → Loss of $11 per $100! |
| Plastic Gloves (PVC/PE) | 3926.20.10.20 |
Mistake: Declare as Rubber → Pay 37.7% instead of 10% → Massive Overpayment! |
| Agricultural Rubber Gloves | 3926.20.40.50 |
Mistake: Declare as General Rubber → Pay 49% instead of 16.5% → Loss of $32.5 per $100! |
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Gloves | Provide design specs and material certificates. Avoid vague terms like "Rubber-like" |
| Mixed Materials (Rubber Handle + Plastic Fingers) | Declare as the component giving essential character, or split if possible (but usually declared as one unit) |
| Agricultural Gloves | Must include invoices or end-user statements confirming agricultural use to qualify for 3926.20.40.50 |
| Medical vs. Industrial | If medical, ensure it doesn't fall under Chapter 90 (Medical Devices) which may have different rules |
🌍 5. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Remarks |
|---|---|---|---|---|
| 🇺🇸 USA | 3926.20.10.20 (if Plastic) |
10% (Plastic) / 37.7%-49% (Rubber) | None Specific | Tariff arbitrage possible by material choice |
| 🇨🇳 China | 4015.19.11.10 |
10-15% | CCC (if applicable) | No Section 301/122 |
| 🇪🇺 EU | 4015.19.11.11 |
4-6% | CE (if PPE) | No Surtaxes |
| 🇬🇧 UK | 4015.19.11.11 |
4-6% | UKCA | Post-Brexit alignment with EU |
| 🇯🇵 Japan | 4015.19.11.90 |
3-6% | PSE (if electrical) | Generally low duties |
📌 Conclusion:
- USA is the most critical market due to high Section 301 and 122 tariffs.
- Plastic classification (Chapter 39) is significantly cheaper than Rubber (Chapter 40) in the US.
- Agaric use loophole: Agricultural rubber gloves enjoy lower rates by being classified under plastic logic.
📌 6. Common Errors & Pitfall Guide (Lessons Learned)
❌ Error 1: Calling all gloves "Rubber Gloves" without specifying material state
👉 Consequence: Customs may choose the highest rate (49%) due to ambiguity.
❌ Error 2: Declaring Plastic Gloves as Rubber to avoid plastic-specific restrictions
👉 Consequence: Tariff increases from 10% to 37.7% → Financial Loss!
❌ Error 3: Failing to prove Agricultural Use for 3926.20.40.50
👉 Consequence: Rejected for preferential rate, back to 49% or 38%
❌ Error 4: Confusing Unvulcanized (4006) with Vulcanized (4015)
👉 Consequence: Wrong duty calculation, potential penalties for misdeclaration
✅ Correct Practice:
"Vulcanized Rubber Gloves, 12-inch, Industrial Use, Material: Natural Rubber, HS Code: 4015.19.11.10"
OR
"Plastic Gloves, PVC, Household Use, HS Code: 3926.20.10.20"
🎯 7. Conclusion: Precise Classification Saves Money!
🎯 Key Takeaway:
🔹 "Check Material: Rubber or Plastic?"
🔹 "Check State: Vulcanized or Unvulcanized?"
🔹 "Check Use: Agricultural or General?"🔹 Tax Rate Spread: From 10% (Plastic) to 49% (Vulcanized Synthetic Rubber).
🔹 Potential Savings: Up to 39% on CIF value by choosing the correct classification!
📌 Pro Tip:
If your gloves are plastic, always declare under Chapter 39.
If they are rubber, prove agricultural use to access Chapter 39 rates.
If industrial rubber, stick to 4015.19.11.10 for the lowest rubber rate (38%).
📣 Immediate Action:
📞 Consult with a customs broker + Provide material certificates + Apply for Advance Ruling
🚀 Ensure your Long Rubber Gloves pass customs smoothly and maximize profit margins!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent of Tariff Saved is Pure Profit!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。