Plastic Washbasin Edge
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3922100000 | 23.8% | CN | US | 官方文档 |
| 3926902500 | 24.0% | CN | US | 官方文档 |
| 3926909989 | 22.8% | CN | US | 官方文档 |
| 3926305000 | 22.8% | CN | US | 官方文档 |
| 3922900000 | 41.3% | CN | US | 官方文档 |
| 3916200091 | 40.8% | CN | US | 官方文档 |
商品图片
AI分析
🛁 Plastic Washbasin Edge (Shower/Basin Trim & Edge Components)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: What exactly is a "Plastic Washbasin Edge"?
A "Plastic Washbasin Edge" typically refers to decorative trim, sealing strips, or structural components made of plastic, used at the junction of washbasins, bathtubs, or shower enclosures. In international trade, the classification depends heavily on its primary function and structural form:
- Decorative/Sealing Trims (3926 or 3922): Thin strips, edges, or decorative moldings that serve an aesthetic or waterproofing purpose. These are generally classified under "Other articles of plastics" or "Sanitary ware articles".
- Functional/Connecting Parts (3926 or 3916): If the plastic piece acts as a connector, profile, or structural connector rather than just a decorative edge, it may fall under "Other articles of plastics" or "Plastics, primary forms" (if extruded profiles).
⚠️ Key Distinction Point:
- If it is a finished decorative strip or seal for a sanitary fixture → 3922.10.00.00 or 3926.90.25.00 / 3926.90.99.89.
- If it is a functional connector component → 3926.30.50.00.
- If it is classified as generic plastic sanitary ware not specifically for showers → 3922.90.00.00.
- If it is an extruded plastic profile used as a material component → 3916.20.00.91.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Primary Function |
|---|---|---|---|
3922.10.00.00 |
Sanitary ware articles of plastics, for shower rooms | Shower edge trims, bathtub edges | ✅ Shower/Bath specific sanitary component |
3926.90.25.00 |
Other articles of plastics: other | Edge strips, decorative trims for basins | ✅ Decorative/Trim function |
3926.90.99.89 |
Other articles of plastics: other | Plastic parts for washbasin edges | ✅ General plastic article for edge |
3926.30.50.00 |
Other articles of plastics: fittings | Connectors, functional edge components | ✅ Functional/Connector role |
3922.90.00.00 |
Sanitary ware articles of plastics: other | Other plastic sanitary components | ✅ General sanitary ware (high tariff) |
3916.20.00.91 |
Plastics, in primary forms: other | Plastic profiles, extruded edge materials | ✅ Raw/Profile form material |
🔍 Critical Reminder:
- Sanitary Ware vs. General Plastic: Items specifically designed for sanitary installations (like shower edges) often fall under 3922. However, if they are just "edge strips" for general basins, 3926 is more common.
- High Tariff Risk:3922.90.00.00and3916.20.00.91carry significantly higher USITC (301 Clause) and IEEPA tariffs. Avoid these if a 3926 code is accurate.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes & Policy Surcharges)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 onwards (including subsequent imports)
🎯 1. 3922.10.00.00 —— Sanitary Ware for Shower Rooms (Plastic)
| Item | Content |
|---|---|
| Base Tariff | 6.3% (ad valorem) |
| USITC Additional Tariff (301 Clause) | +7.5% |
| IEEPA Additional Tariff | +10% (China/HK product) |
| Total Rate | 23.8% |
| Tax Calculation | CIF Value × 23.8% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3922.10.00.00 |
📌 Explanation:
- This is the most favorable rate for shower-related plastic edges.
- The total burden is 23.8%, which is moderate compared to other plastic categories.
🎯 2. 3926.90.25.00 —— Other Articles of Plastics (Edge Strip/Decorative)
| Item | Content |
|---|---|
| Base Tariff | 6.5% |
| USITC Additional Tariff (301 Clause) | +7.5% |
| IEEPA Additional Tariff | +10% |
| Total Rate | 24.0% |
| Tax Calculation | CIF Value × 24.0% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3926.90.25.00 |
📌 Note:
- Suitable for decorative trims or edge seals that are not strictly "shower sanitary ware" but general basin accessories.
- Tax is virtually identical to3922.10.00.00.
🎯 3. 3926.90.99.89 & 3926.30.50.00 —— Other Plastic Articles / Fittings
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| USITC Additional Tariff (301 Clause) | +7.5% |
| IEEPA Additional Tariff | +10% |
| Total Rate | 22.8% |
| Tax Calculation | CIF Value × 22.8% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3926.90.99.89 / 3926.30.50.00 |
📌 Note:
-3926.30.50.00applies if the part is a connector or functional fitting.
-3926.90.99.89is a "catch-all" for other plastic articles not specified elsewhere.
- Both offer the lowest total rate (22.8%) among the sanitary/decorative options, but require strict functional justification.
🎯 4. 3922.90.00.00 & 3916.20.00.91 —— High Tariff Categories (Avoid if Possible)
A. 3922.90.00.00 (Other Sanitary Ware)
| Item | Content |
|---|---|
| Base Tariff | 6.3% |
| USITC Additional Tariff (301 Clause) | +25.0% |
| IEEPA Additional Tariff | +10% |
| Total Rate | 41.3% |
| Tax Calculation | CIF Value × 41.3% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
⚠️ Warning: The USITC surcharge jumps to 25% here. This is a high-risk classification unless the item is strictly defined as "other sanitary ware" not fitting 3922.10.
B. 3916.20.00.91 (Plastics, Primary Forms: Other)
| Item | Content |
|---|---|
| Base Tariff | 5.8% |
| USITC Additional Tariff (301 Clause) | +25.0% |
| IEEPA Additional Tariff | +10% |
| Total Rate | 40.8% |
| Tax Calculation | CIF Value × 40.8% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
⚠️ Warning: Classifying finished plastic trim as "primary forms" (extrusions/profiles) triggers the 25% USITC tariff. Only use this if the item is sold as raw profile material, not a finished edge component.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
✅ 1. Documentation Checklist (Non-Negotiable)
| Document | Mandatory | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Material type (e.g., ABS, PVC), dimensions, hardness. |
| ✅ Product Photos | ✔️ | Clear images showing the edge profile, installation context, and any branding. |
| ✅ Commercial Invoice | ✔️ | Must clearly state "Plastic Washbasin Edge Trim" or "Shower Seal Strip". Avoid vague terms like "Plastic Part". |
| ✅ Packing List | ✔️ | Detail the quantity and net/gross weight. |
| ✅ Structure Diagram | ✔️ | If claiming 3926.30.50.00 (connector), provide a diagram showing how it connects. |
✅ 2. Declaration Strategies (Key Mnemonics)
🔥 “Function Dictates Code: Decorate is 3926, Shower is 3922, Profile is 3916, High Tax is Risky!”
| Scenario | Correct HS Code | Incorrect Practice | Consequence |
|---|---|---|---|
| Decorative edge strip for basin | 3926.90.25.00 / 3926.90.99.89 |
Misclassified as 3916.20.00.91 |
Save 17%+ (40.8% vs 22.8%) |
| Shower room sealing edge | 3922.10.00.00 |
Misclassified as 3922.90.00.00 |
Save 17.5% (23.8% vs 41.3%) |
| Functional plastic connector | 3926.30.50.00 |
Misclassified as generic plastic | Verify function to avoid audits |
| Raw plastic profile (not finished) | 3916.20.00.91 |
Selling finished trim as raw profile | High Audits, potential penalties |
✅ 3. Special Case Handling
| Scenario | Handling Advice |
|---|---|
| Mixed Materials | If the edge has a metal core or rubber seal, ensure the plastic component is the essential character. If mixed, complex classification may apply. |
| OEM Custom Shapes | Provide CAD drawings to prove the specific "edge" or "connector" function to support 3926.30.50.00 or 3926.90.25.00. |
| Shower vs. Basin | Explicitly label the product purpose. "For Shower Room" triggers 3922.10. "For Washbasin" allows 3926 options. |
🌍 V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification Required | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3926.90.25.00 / 3922.10.00.00 |
22.8% - 24.0% | N/A (but accurate classification is critical) | Avoid 3922.90 & 3916 to save ~18%. |
| 🇨🇳 China | 3926.90.99.89 |
~6-9% | CCC (if applicable) | Standard import duties apply. |
| 🇪🇺 EU | 3926.90.99 |
~6% | CE (if relevant), REACH | No major additional surcharges like US. |
| 🇬🇧 UK | 3926.90.99 |
~6% | UKCA | Post-Brexit standards apply. |
📌 Conclusion:
- The USA imposes significant additional tariffs on Chinese plastic goods.
- Strategic Classification between3926(22.8-24%) and3922.90/3916(40-41%) can save ~17% in duty costs.
- Always prioritize3926or3922.10for finished decorative/functional edges.
📌 VI. Common Mistakes & Pitfall Guide (Lessons Learned)
❌ Mistake 1: Calling finished trim "Plastic Profile" to confuse customs.
👉 Consequence: Customs may still classify as 3916 (40.8%) if it looks like a finished product, or demand proof. Don't risk it.
❌ Mistake 2: Using 3922.90.00.00 for shower edges.
👉 Consequence: Paying 41.3% instead of 23.8%. Overpaying by 17.5%!
❌ Mistake 3: Ignoring the "Shower" vs. "Basin" distinction.
👉 Consequence: Misclassification leads to delays. Shower edges belong in 3922.10; Basin trims in 3926.
✅ Correct Declaration Example:
"Plastic Decorative Edge Trim for Washbasin, Made of PVC, Model XYZ, for Residential Use" → 3926.90.25.00
🎯 VII. Conclusion: Precision Classification, Maximize Profit!
🎯 Remember the Mantra:
🔹 "Decorate is 3926, Shower is 3922, Profile is 3916, High Tax is Risky!"
🔹 "22.8% vs 41.3%: One letter in HS Code saves your margin!"
📌 Pro Tip:
If your plastic edges are originating from Vietnam, Thailand, or Malaysia, check for IEEPA Exemptions or lower USITC rates. Consider supply chain adjustment if volume is high.
📣 Immediate Action:
📞 Contact a Professional Customs Broker
📄 Provide Product Photos & Functional Description
🚀 Apply for Advance Ruling (if eligible) to lock in the 22.8%-24.0% rate.
✨ Professional Clearance Starts with Precise Classification!
💼 Every Percent in Duty is Your Pure Profit!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。