Plastic Washbasin Edge
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3922100000 | 23.8% | CN | US | Official Doc |
| 3926902500 | 24.0% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
| 3926305000 | 22.8% | CN | US | Official Doc |
| 3922900000 | 41.3% | CN | US | Official Doc |
| 3916200091 | 40.8% | CN | US | Official Doc |
Product Images
AI Analysis
π Plastic Washbasin Edge (Shower/Basin Trim & Edge Components)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: What exactly is a "Plastic Washbasin Edge"?
A "Plastic Washbasin Edge" typically refers to decorative trim, sealing strips, or structural components made of plastic, used at the junction of washbasins, bathtubs, or shower enclosures. In international trade, the classification depends heavily on its primary function and structural form:
- Decorative/Sealing Trims (3926 or 3922): Thin strips, edges, or decorative moldings that serve an aesthetic or waterproofing purpose. These are generally classified under "Other articles of plastics" or "Sanitary ware articles".
- Functional/Connecting Parts (3926 or 3916): If the plastic piece acts as a connector, profile, or structural connector rather than just a decorative edge, it may fall under "Other articles of plastics" or "Plastics, primary forms" (if extruded profiles).
β οΈ Key Distinction Point:
- If it is a finished decorative strip or seal for a sanitary fixture β 3922.10.00.00 or 3926.90.25.00 / 3926.90.99.89.
- If it is a functional connector component β 3926.30.50.00.
- If it is classified as generic plastic sanitary ware not specifically for showers β 3922.90.00.00.
- If it is an extruded plastic profile used as a material component β 3916.20.00.91.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Primary Function |
|---|---|---|---|
3922.10.00.00 |
Sanitary ware articles of plastics, for shower rooms | Shower edge trims, bathtub edges | β Shower/Bath specific sanitary component |
3926.90.25.00 |
Other articles of plastics: other | Edge strips, decorative trims for basins | β Decorative/Trim function |
3926.90.99.89 |
Other articles of plastics: other | Plastic parts for washbasin edges | β General plastic article for edge |
3926.30.50.00 |
Other articles of plastics: fittings | Connectors, functional edge components | β Functional/Connector role |
3922.90.00.00 |
Sanitary ware articles of plastics: other | Other plastic sanitary components | β General sanitary ware (high tariff) |
3916.20.00.91 |
Plastics, in primary forms: other | Plastic profiles, extruded edge materials | β Raw/Profile form material |
π Critical Reminder:
- Sanitary Ware vs. General Plastic: Items specifically designed for sanitary installations (like shower edges) often fall under 3922. However, if they are just "edge strips" for general basins, 3926 is more common.
- High Tariff Risk:3922.90.00.00and3916.20.00.91carry significantly higher USITC (301 Clause) and IEEPA tariffs. Avoid these if a 3926 code is accurate.
π° III. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes & Policy Surcharges)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 onwards (including subsequent imports)
π― 1. 3922.10.00.00 ββ Sanitary Ware for Shower Rooms (Plastic)
| Item | Content |
|---|---|
| Base Tariff | 6.3% (ad valorem) |
| USITC Additional Tariff (301 Clause) | +7.5% |
| IEEPA Additional Tariff | +10% (China/HK product) |
| Total Rate | 23.8% |
| Tax Calculation | CIF Value Γ 23.8% |
| De Minimis Exemption | β Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:3922.10.00.00 |
π Explanation:
- This is the most favorable rate for shower-related plastic edges.
- The total burden is 23.8%, which is moderate compared to other plastic categories.
π― 2. 3926.90.25.00 ββ Other Articles of Plastics (Edge Strip/Decorative)
| Item | Content |
|---|---|
| Base Tariff | 6.5% |
| USITC Additional Tariff (301 Clause) | +7.5% |
| IEEPA Additional Tariff | +10% |
| Total Rate | 24.0% |
| Tax Calculation | CIF Value Γ 24.0% |
| De Minimis Exemption | β Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:3926.90.25.00 |
π Note:
- Suitable for decorative trims or edge seals that are not strictly "shower sanitary ware" but general basin accessories.
- Tax is virtually identical to3922.10.00.00.
π― 3. 3926.90.99.89 & 3926.30.50.00 ββ Other Plastic Articles / Fittings
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| USITC Additional Tariff (301 Clause) | +7.5% |
| IEEPA Additional Tariff | +10% |
| Total Rate | 22.8% |
| Tax Calculation | CIF Value Γ 22.8% |
| De Minimis Exemption | β Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:3926.90.99.89 / 3926.30.50.00 |
π Note:
-3926.30.50.00applies if the part is a connector or functional fitting.
-3926.90.99.89is a "catch-all" for other plastic articles not specified elsewhere.
- Both offer the lowest total rate (22.8%) among the sanitary/decorative options, but require strict functional justification.
π― 4. 3922.90.00.00 & 3916.20.00.91 ββ High Tariff Categories (Avoid if Possible)
A. 3922.90.00.00 (Other Sanitary Ware)
| Item | Content |
|---|---|
| Base Tariff | 6.3% |
| USITC Additional Tariff (301 Clause) | +25.0% |
| IEEPA Additional Tariff | +10% |
| Total Rate | 41.3% |
| Tax Calculation | CIF Value Γ 41.3% |
| De Minimis Exemption | β Not Eligible (deny_de_minimis) |
β οΈ Warning: The USITC surcharge jumps to 25% here. This is a high-risk classification unless the item is strictly defined as "other sanitary ware" not fitting 3922.10.
B. 3916.20.00.91 (Plastics, Primary Forms: Other)
| Item | Content |
|---|---|
| Base Tariff | 5.8% |
| USITC Additional Tariff (301 Clause) | +25.0% |
| IEEPA Additional Tariff | +10% |
| Total Rate | 40.8% |
| Tax Calculation | CIF Value Γ 40.8% |
| De Minimis Exemption | β Not Eligible (deny_de_minimis) |
β οΈ Warning: Classifying finished plastic trim as "primary forms" (extrusions/profiles) triggers the 25% USITC tariff. Only use this if the item is sold as raw profile material, not a finished edge component.
π οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
β 1. Documentation Checklist (Non-Negotiable)
| Document | Mandatory | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Material type (e.g., ABS, PVC), dimensions, hardness. |
| β Product Photos | βοΈ | Clear images showing the edge profile, installation context, and any branding. |
| β Commercial Invoice | βοΈ | Must clearly state "Plastic Washbasin Edge Trim" or "Shower Seal Strip". Avoid vague terms like "Plastic Part". |
| β Packing List | βοΈ | Detail the quantity and net/gross weight. |
| β Structure Diagram | βοΈ | If claiming 3926.30.50.00 (connector), provide a diagram showing how it connects. |
β 2. Declaration Strategies (Key Mnemonics)
π₯ βFunction Dictates Code: Decorate is 3926, Shower is 3922, Profile is 3916, High Tax is Risky!β
| Scenario | Correct HS Code | Incorrect Practice | Consequence |
|---|---|---|---|
| Decorative edge strip for basin | 3926.90.25.00 / 3926.90.99.89 |
Misclassified as 3916.20.00.91 |
Save 17%+ (40.8% vs 22.8%) |
| Shower room sealing edge | 3922.10.00.00 |
Misclassified as 3922.90.00.00 |
Save 17.5% (23.8% vs 41.3%) |
| Functional plastic connector | 3926.30.50.00 |
Misclassified as generic plastic | Verify function to avoid audits |
| Raw plastic profile (not finished) | 3916.20.00.91 |
Selling finished trim as raw profile | High Audits, potential penalties |
β 3. Special Case Handling
| Scenario | Handling Advice |
|---|---|
| Mixed Materials | If the edge has a metal core or rubber seal, ensure the plastic component is the essential character. If mixed, complex classification may apply. |
| OEM Custom Shapes | Provide CAD drawings to prove the specific "edge" or "connector" function to support 3926.30.50.00 or 3926.90.25.00. |
| Shower vs. Basin | Explicitly label the product purpose. "For Shower Room" triggers 3922.10. "For Washbasin" allows 3926 options. |
π V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification Required | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3926.90.25.00 / 3922.10.00.00 |
22.8% - 24.0% | N/A (but accurate classification is critical) | Avoid 3922.90 & 3916 to save ~18%. |
| π¨π³ China | 3926.90.99.89 |
~6-9% | CCC (if applicable) | Standard import duties apply. |
| πͺπΊ EU | 3926.90.99 |
~6% | CE (if relevant), REACH | No major additional surcharges like US. |
| π¬π§ UK | 3926.90.99 |
~6% | UKCA | Post-Brexit standards apply. |
π Conclusion:
- The USA imposes significant additional tariffs on Chinese plastic goods.
- Strategic Classification between3926(22.8-24%) and3922.90/3916(40-41%) can save ~17% in duty costs.
- Always prioritize3926or3922.10for finished decorative/functional edges.
π VI. Common Mistakes & Pitfall Guide (Lessons Learned)
β Mistake 1: Calling finished trim "Plastic Profile" to confuse customs.
π Consequence: Customs may still classify as 3916 (40.8%) if it looks like a finished product, or demand proof. Don't risk it.
β Mistake 2: Using 3922.90.00.00 for shower edges.
π Consequence: Paying 41.3% instead of 23.8%. Overpaying by 17.5%!
β Mistake 3: Ignoring the "Shower" vs. "Basin" distinction.
π Consequence: Misclassification leads to delays. Shower edges belong in 3922.10; Basin trims in 3926.
β Correct Declaration Example:
"Plastic Decorative Edge Trim for Washbasin, Made of PVC, Model XYZ, for Residential Use" β 3926.90.25.00
π― VII. Conclusion: Precision Classification, Maximize Profit!
π― Remember the Mantra:
πΉ "Decorate is 3926, Shower is 3922, Profile is 3916, High Tax is Risky!"
πΉ "22.8% vs 41.3%: One letter in HS Code saves your margin!"
π Pro Tip:
If your plastic edges are originating from Vietnam, Thailand, or Malaysia, check for IEEPA Exemptions or lower USITC rates. Consider supply chain adjustment if volume is high.
π£ Immediate Action:
π Contact a Professional Customs Broker
π Provide Product Photos & Functional Description
π Apply for Advance Ruling (if eligible) to lock in the 22.8%-24.0% rate.
β¨ Professional Clearance Starts with Precise Classification!
πΌ Every Percent in Duty is Your Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.