Polyamide Film Laminate
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 5407410030 | 48.6% | CN | US | 官方文档 |
| 3908100000 | 41.3% | CN | US | 官方文档 |
| 3920920000 | 39.2% | CN | US | 官方文档 |
| 3920991000 | 41.0% | CN | US | 官方文档 |
| 3908907000 | 41.5% | CN | US | 官方文档 |
商品图片
AI分析
🎞️ Polyamide Film Laminate (PA Film)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 1. Product Definition & Classification: Do You Really Understand "Polyamide Film"?
Polyamide (PA) film, often referred to as Nylon film, is a high-performance plastic film known for its excellent mechanical strength, gas barrier properties, and heat resistance. In international trade, its classification depends heavily on its state (whether it is in a primary form/raw material or a processed product like fabric/sheet) and material composition.
Two Main Classification Paths: 1. Primary Forms (Raw Resins/Flakes): If the PA is in raw, unprocessed forms (even if technically a film precursor), it falls under Chapter 39 (Plastics). 2. Processed Films/Sheets: If the PA has been extruded, stretched, or processed into a specific film format for packaging or industrial use, it may fall under Chapter 54 (Synthetic Filament Yarn/Fabrics) or Chapter 39 (Other Plastic Films).
⚠️ Key Distinction:
- If the product is described as "Polyamide in primary forms" or generic "PA film" without specific fabric characteristics → Chapter 39 (Plastics)
- If the product is explicitly a "fabric/sheet" of synthetic filament yarn → Chapter 54 (Textiles/Fabrics)
- Note: Misclassification between Chapter 39 and 54 is a common customs error that triggers significant duty differences.
📦 2. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Material State |
|---|---|---|---|
5407.41.00.30 |
Polyamide Film, classified as fabric/sheet type | Processed polyamide film with fabric-like structure | ✅ Fabric/Sheet |
3908.10.00.00 |
Polyamide, primary form (filaments) | Raw PA resins, flakes, or primary film forms | ✅ Primary Form |
3920.92.00.00 |
Polyamide Film, plastic plate/sheet/film | General purpose PA film for packaging, lamination | ✅ Plastic Film |
3920.99.10.00 |
Other plates, sheets, film (Plastic) | Non-specified plastic films, generic PA films | ✅ Plastic Film |
3908.90.70.00 |
Polyamide, other primary forms | Other raw PA forms not specified elsewhere | ✅ Primary Form |
🔍 Key Reminder:
- Chapter 54 (5407.41.00.30) applies when the PA is considered a "fabric" or "sheet" of synthetic filament. This often carries higher duties due to textile-related tariffs.
- Chapter 39 (3908&3920) applies to plastics in primary forms or general plastic films. These are typically used for packaging, laminates, and industrial films.
- Material Consistency: Ensure the HS code matches the actual material. If it's purely polyamide, codes like3920.99.10.00(which says "plastic") are acceptable only if polyamide is classified under plastic in this context.
💰 3. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 onwards (including subsequent imports)
🎯 1. 5407.41.00.30 —— Polyamide Film (Fabric/Sheet Type)
| Item | Content |
|---|---|
| Basic Duty Rate | 13.6% |
| Section 301 Additional Duty | +25.0% |
| 122 Clause Duty | +10.0% |
| Total Duty Rate | 48.6% |
| Tax Calculation | CIF Value × 48.6% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Section 301: 9903.88.01 → 122 Clause → USITC:5407.41.00.30 |
📌 Explanation:
- The 13.6% basic rate is for synthetic filament fabric/film.
- The 25% Section 301 duty applies to Chinese-made textiles/synthetic films.
- The 10% 122 Clause duty is an additional safeguard tariff.
- Total 48.6% is a very high tariff, requiring careful cost planning.
🎯 2. 3908.10.00.00 —— Polyamide in Primary Forms
| Item | Content |
|---|---|
| Basic Duty Rate | 6.3% |
| Section 301 Additional Duty | +25.0% |
| 122 Clause Duty | +10.0% |
| Total Duty Rate | 41.3% |
| Tax Calculation | CIF Value × 41.3% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Section 301 → 122 Clause → USITC:3908.10.00.00 |
📌 Note:
- If the polyamide is in primary form (e.g., raw pellets, flakes, or unprocessed film resin), it falls under Chapter 39.
- The basic duty is lower (6.3%) than the fabric classification, but the total 41.3% is still significant.
🎯 3. 3920.92.00.00 —— Polyamide Film (Plastic Film)
| Item | Content |
|---|---|
| Basic Duty Rate | 4.2% |
| Section 301 Additional Duty | +25.0% |
| 122 Clause Duty | +10.0% |
| Total Duty Rate | 39.2% |
| Tax Calculation | CIF Value × 39.2% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Section 301 → 122 Clause → USITC:3920.92.00.00 |
📌 Advantage:
- This code offers the lowest total duty rate (39.2%) among the options.
- Suitable for laminated polyamide films used in packaging, where the material is clearly identified as a plastic film rather than a fabric.
🎯 4. 3920.99.10.00 —— Other Plastic Plates, Sheets, Film
| Item | Content |
|---|---|
| Basic Duty Rate | 6.0% |
| Section 301 Additional Duty | +25.0% |
| 122 Clause Duty | +10.0% |
| Total Duty Rate | 41.0% |
| Tax Calculation | CIF Value × 41.0% |
| De Minimis Eligibility | ❌ Not Eligible |
| Legal Basis Path | Section 301 → 122 Clause → USITC:3920.99.10.00 |
📌 Usage:
- Use this when the polyamide film does not fit specifically into3920.92(e.g., if it's a mixed plastic film or not clearly polyamide-only in customs view).
- Slightly higher than3920.92due to higher basic duty (6.0% vs 4.2%).
🎯 5. 3908.90.70.00 —— Other Polyamide in Primary Forms
| Item | Content |
|---|---|
| Basic Duty Rate | 6.5% |
| Section 301 Additional Duty | +25.0% |
| 122 Clause Duty | +10.0% |
| Total Duty Rate | 41.5% |
| Tax Calculation | CIF Value × 41.5% |
| > 📌 Note: | |
> - This is a "catch-all" for polyamide primary forms not specified in 3908.10. |
|
| > - Highest basic duty (6.5%) among Chapter 39 options, but still lower than Chapter 54. |
🛠️ 4. Practical Clearance Advice (Pitfall Avoidance Guide)
✅ 1. Required Documentation Checklist
| Document | Must Provide | Description |
|---|---|---|
| ✅ Product Spec Sheet | ✔️ | Material composition (100% PA or blend), thickness, width, application (packaging/industrial). |
| ✅ Photos of Product | ✔️ | Clear images showing film texture, edge cut, and any lamination layers. |
| ✅ Commercial Invoice | ✔️ | Clearly state "Polyamide Film Laminate" or "Nylon Film" with HS Code. |
| ✅ Certificate of Origin | ✔️ | To verify origin for Section 301 applicability. |
| ✅ Packing List | ✔️ | Include net/gross weight, number of rolls, dimensions. |
| ✅ Declaration of Non-Textile Use | ⚠️ If using Ch. 54 | If claiming Ch. 54, clarify if it's used as textile or industrial film. |
✅ 2. Declaration Tips (Key Mantra)
🔥 “Material First, Form Second, Code Choice Affects Cost!”
| Scenario | Correct HS Code | Incorrect Practice |
|---|---|---|
| Packaging Laminate Film | 3920.92.00.00 (39.2%) |
Misdeclare as 5407.41.00.30 → 48.6% |
| Raw PA Resin/Flakes | 3908.10.00.00 (41.3%) |
Misdeclare as finished film → 41.3% vs 39.2% |
| General Plastic Film | 3920.99.10.00 (41.0%) |
Use if specific PA classification is uncertain. |
| Fabric-like PA Film | 5407.41.00.30 (48.6%) |
Only if it meets textile/fabric definition. |
✅ 3. Special Cases Handling
| Case | Recommendation |
|---|---|
| Multi-layer Laminates | If PA is only one layer (e.g., PA/PE), classify based on essential character. If PA dominates, consider 3920.92. |
| Export vs. Domestic Use | Ensure the invoice states "For Industrial Use" or "Packaging Material" to avoid confusion with textile goods. |
| Pre-Ruling | Apply for Advance Ruling if unsure whether the film is classified as plastic (Ch. 39) or fabric (Ch. 54). |
| Origin Verification | Ensure Certificate of Origin clearly states "China" to confirm Section 301 applicability. |
🌍 5. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Duty Rate | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3920.92.00.00 |
39.2% | No special certs | Highest complexity due to 301 + 122 clauses |
| 🇨🇳 China | 3920.92.00.00 |
~4-6% | None | Low duty for domestic use |
| 🇪🇺 EU | 3920.92.00.00 |
~4% | REACH + RoHS | No Section 301 equivalent |
| 🇯🇵 Japan | 3920.92.00.00 |
~6% | PSE (if electrical) | Stable tariff structure |
📌 Conclusion:
- USA is the most complex market for Polyamide Film due to additional tariffs.
- Choosing the right HS Code can save ~9.4% in duties (48.6% vs 39.2%).
- Chapter 39 (Plastics) is generally more favorable than Chapter 54 (Textiles) for polyamide films.
📌 6. Common Mistakes & Pitfall Guide (Lessons Learned)
❌ Mistake 1: Classifying packaging film as textile fabric (5407.41.00.30)
👉 Consequence: 48.6% duty instead of 39.2% → Overpayment!
❌ Mistake 2: Declaring raw PA resin as finished film
👉 Consequence: May trigger inspections for mismatched physical goods → Delays/Fines!
❌ Mistake 3: Ignoring 122 Clause applicability
👉 Consequence: Under-declaration → Back Taxes + Penalties!
❌ Mistake 4: Using generic "Plastic Film" without specifying Polyamide
👉 Consequence: Customs may reclassify to a higher duty code → Uncertainty!
✅ Correct Practice:
“Polyamide (PA) Film Laminate, 20 Micron, for Food Packaging, Material: 100% Polyamide, Origin: China”
🎯 7. Conclusion: Professional Declaration, Cost Reduction!
🎯 Key Takeaway:
🔹 “Plastic over Fabric: Save 9.4% on Duties!”
🔹 “HS Code Choice: 39.2% vs 48.6% – Know the Difference!”
🔹 “Always Declare Material & Form Accurately to Avoid Delays!”
📌 Pro Tip:
- If your polyamide film is not made in China, Section 301 duties may be exempt.
- Apply for Pre-Ruling if you are unsure about the fabric vs. plastic classification.
- Work with Experienced Customs Brokers to navigate Section 301 and 122 Clause complexities.
📣 Immediate Action:
📞 Contact your customs broker + Provide Product Specs + Confirm HS Code
3920.92.00.00
🚀 Clear Customs Smoothly, Reduce Costs, Maximize Profits!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Dollar Saved Counts in Global Trade!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。