Polyvinyl Chloride Resin Blow Molding Grade
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 3904210000 | 41.5% | CN | US | 官方文档 |
| 3904220000 | 41.5% | CN | US | 官方文档 |
| 8477300000 | 38.1% | CN | US | 官方文档 |
| 8477908601 | 38.1% | CN | US | 官方文档 |
商品图片
AI分析
🧪 Polyvinyl Chloride (PVC) Resin: Blow Molding Grade
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
📌 Part I: Product Definition & Classification: What is "Blow Molding Grade PVC"?
Polyvinyl Chloride (PVC) resin is a versatile thermoplastic polymer. In the context of trade and customs classification, "Blow Molding Grade" refers specifically to PVC formulations designed for the blow molding manufacturing process (used to make hollow articles like bottles, containers, and drums).
In international trade, PVC is primarily categorized by its plasticization state: 1. Non-plasticized (Unplasticized PVC / uPVC): Rigid PVC, used for pipes, profiles, and hard containers. 2. Plasticized PVC: Flexible PVC, used for films, cables, and soft packaging.
⚠️ Critical Distinction for Customs:
- If the PVC resin is rigid and intended for blow molding rigid containers (e.g., chemical bottles, detergent bottles), it is classified as Non-plasticized.
- If the PVC resin is flexible and intended for blow molding soft products (e.g., air mattresses, inflatable toys), it is classified as Plasticized.
- Blow Molding Machinery is a separate category entirely (HS 8477). This guide focuses on the resin material itself.
📦 Part II: HS Code Classification Details (2026 Latest Tariff Alignment)
| HS Code | Product Description | Applicable Scenario | Plasticization State |
|---|---|---|---|
3904.21.00.00 |
Polymers of vinyl chloride... Other poly(vinyl chloride): Nonplasticized | Rigid PVC resin for blow-molding bottles, pipes, or rigid containers | ❌ No Plasticizers |
3904.22.00.00 |
Polymers of vinyl chloride... Other poly(vinyl chloride): Plasticized | Flexible PVC resin for blow-molding films, inflatables, or soft packaging | ✅ With Plasticizers |
🔍 Key Reminder:
- The term "Blow Molding Grade" in a commercial invoice must be clarified by specifying whether the resin is Rigid (Non-plasticized) or Flexible (Plasticized).
- Misclassification between 3904.21 and 3904.22 can lead to customs audits, as the physical properties and end-uses are significantly different.
- Machinery (HS 8477) is NOT included in the resin classification. If you are importing machines, refer to the machinery codes below.
💰 Part III: 2026 Latest Tariff Rate Breakdown (Including Surcharges)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: November 10, 2025 onwards (for subsequent imports)
🎯 1. 3904.21.00.00 —— Non-plasticized PVC Resin (Rigid)
| Item | Content |
|---|---|
| Base Tariff | 0.0% (ad valorem) |
| Section 301 Surcharge | 0.0% |
| IEEPA Surcharge | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value × 0.0% = $0 |
| De Minimis Eligibility | ✅ Yes (if value < $800 per shipment, generally exempt from duties, but subject to other regulations) |
| Legal Basis Path | HTSUS:3904.21.00.00 → No 301/IEEPA footnote applies to this specific PVC subheading for China origin in this dataset. |
📌 Explanation:
- Unlike many other Chinese-manufactured goods, Non-plasticized PVC resin currently enjoys a 0% total tariff rate in the US.
- This makes it a cost-effective material for importing rigid PVC supplies.
- However, verify if any anti-dumping (AD) or countervailing duties (CVD) apply, as PVC resin has been subject to trade remedies in the past. This dataset indicates no current tariffs.
🎯 2. 3904.22.00.00 —— Plasticized PVC Resin (Flexible)
| Item | Content |
|---|---|
| Base Tariff | 0.0% (ad valorem) |
| Section 301 Surcharge | 0.0% |
| IEEPA Surcharge | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value × 0.0% = $0 |
| De Minimis Eligibility | ✅ Yes (if value < $800 per shipment) |
| Legal Basis Path | HTSUS:3904.22.00.00 → No 301/IEEPA footnote applies to this specific PVC subheading for China origin in this dataset. |
📌 Note:
- Similar to non-plasticized PVC, Plasticized PVC resin also has a 0% total tariff rate.
- Both rigid and flexible PVC resins are currently tariff-free under this dataset.
- Caution: While tariffs are 0%, ensure the product complies with FDA regulations if intended for food contact, or EPA regulations for industrial uses.
🛠️ Part IV: Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
✅ 1. Documentation Checklist (Indispensable)
| Document | Must Provide | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state: "PVC Resin," "Blow Molding Grade," and Plasticization State (Plasticized vs. Non-plasticized). |
| ✅ MSDS (Material Safety Data Sheet) | ✔️ | Required for chemical handling and customs safety verification. |
| ✅ Certificate of Origin (CO) | ✔️ | To confirm origin as China (or eligible for preferential treatment if from other countries). |
| ✅ Commercial Invoice | ✔️ | Must match HS Code description exactly: "Polymers of Vinyl Chloride, Non-plasticized" or "Plasticized." |
| ✅ Packaging List | ✔️ | Show net/gross weight, number of bags, and palletization. |
✅ 2. Declaration Tips (Key Mantras)
🔥 “Specify Plasticization, Match HS Code, 0% Duty, Clear Entry!”
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Rigid PVC for Bottles | 3904.21.00.00 |
Misclassifying as 3904.10 (Suspension Type PVC) → Risk of audit |
| Flexible PVC for Inflatables | 3904.22.00.00 |
Misclassifying as 3904.21 → Potential underpayment if rates differed |
| PVC Pellets for Blow Molding | 3904.21 or 3904.22 |
Calling it "Plastic Compounds" → Wrong chapter (Chapter 39 vs 38) |
| Importing Blow Molding Machines | 8477.30.00.00 |
Mixing machine and resin in one shipment → Customs confusion |
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| Mixed Shipment (Resin + Machine) | Declare Separately! Resin goes to HS 3904; Machine goes to HS 8477. Do not blend values. |
| PVC for Food Contact | Provide FDA compliance statement. Customs may request additional testing documentation. |
| Blow Molding Machinery Parts | If importing parts for blow molding machines, use 8477.90.86.01 (Other parts of injection-molding machines). Note: This is for parts, not the whole machine. |
| Whole Blow Molding Machines | Use 8477.30.00.00. These also have 0% tariff in this dataset. |
🌍 Part V: Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3904.21.00.00 / 3904.22.00.00 |
0% | FDA (if food contact), Prop 65 (CA) | No 301 tariffs on PVC resin currently. |
| 🇨🇳 China | 3904.21 / 3904.22 |
0% - 5% | CCC (if applicable) | Import duties may vary by trade agreement. |
| 🇪🇺 EU | 3904.21 / 3904.22 |
0% - 6.5% | REACH Registration | Strict chemical compliance. |
| 🇯🇵 Japan | 3904.21 / 3904.22 |
0% - 5% | JIS Standards | No additional surcharges. |
📌 Conclusion:
- USA offers 0% duty for PVC resin imports from China under current data.
- EU requires REACH compliance, which is a significant non-tariff barrier.
- China may have lower import duties depending on FTAs.
📌 Part VI: Common Errors & Pitfall Guide (Lessons Learned)
❌ Error 1: Declaring "PVC Resin" without specifying "Plasticized" or "Non-plasticized"
👉 Consequence: Customs may detain the shipment for clarification, causing delays and storage fees.
❌ Error 2: Confusing PVC Resin with PVC Compounds/Blends
👉 Consequence: If additives are present in significant quantities, it may fall under Chapter 38 (Miscellaneous Chemical Products). Stick to Chapter 39 if it’s primarily polymer.
❌ Error 3: Mixing Machine and Resin in One Line Item
👉 Consequence: Wrong HS Code assignment → Incorrect duty calculation → Penalties.
❌ Error 4: Assuming "Blow Molding Grade" is a specific HS Code
👉 Consequence: There is no HS Code for "Blow Molding Grade." It must be classified by its chemical nature (PVC type).
✅ Correct Approach:
"PVC Resin, Suspension Polymerized, Non-plasticized, Blow Molding Grade, for Rigid Containers, HS 3904.21.00.00"
🎯 Part VII: Conclusion: Precision Classification, Cost Efficiency, and Compliance!
🎯 Remember the Mantra:
🔹 "Specify Plasticization, Match HS Code, 0% Duty, Clear Entry!"
🔹 "Resin is 3904, Machine is 8477, Don’t Mix Them!"
🔹 "PVC Tariff is 0%, But Compliance is Key!"
📌 Pro Tip:
- If you are importing PVC Resin for blow molding, ensure your supplier provides a clear Material Safety Data Sheet (MSDS) and Technical Data Sheet (TDS).
- For Blow Molding Machines (8477.30.00.00) or their Parts (8477.90.86.01), the tariff is also 0%.
- Always verify if the PVC resin contains phthalates or other restricted substances for the destination market (e.g., EU REACH, US CPSIA).
📣 Immediate Action:
📞 Contact your customs broker + Provide Product Specs + Apply for HS Code Pre-Ruling if uncertain
🚀 Ensure your PVC resin imports are tariff-free, compliant, and smooth!
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Your cost savings are worth calculating!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。