Printing Machine Coating Gasket
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 4016931050 | 37.5% | CN | US | 官方文档 |
| 4016935050 | 37.5% | CN | US | 官方文档 |
| 3926904510 | 38.5% | CN | US | 官方文档 |
| 3926904590 | 38.5% | CN | US | 官方文档 |
| 8487900040 | 38.9% | CN | US | 官方文档 |
| 8487900080 | 88.9% | CN | US | 官方文档 |
商品图片
AI分析
🖨️ Printing Machine Coating Gasket (Seals & Gaskets for Printing Equipment)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
📌 I. Product Definition & Classification: What Exactly is a "Printing Machine Coating Gasket"?
A Printing Machine Coating Gasket is a critical sealing component used in industrial printing presses (offset, digital, flexographic, etc.). Its primary function is to prevent leakage of inks, solvents, adhesives, or cleaning fluids within the coating and ink delivery systems.
In international trade, these are not classified as "parts of printing machinery" (Head 8443) because they are seals/gaskets specifically covered under other chapters. The classification depends heavily on the material composition: - Oil Seals (Mechanical): Often classified under Chapter 84 (Parts of Machinery). - Rubber Gaskets: Classified under Chapter 40 (Articles of Vulcanized Rubber). - Plastic Gaskets: Classified under Chapter 39 (Articles of Plastics).
⚠️ Key Distinction Point:
- If the product is an Oil Seal (mechanical seal with specific geometry like lip seals) → Chapter 84 (8487.90)
- If the product is a simple Gasket/Washer made of Rubber → Chapter 40 (4016.93)
- If the product is a simple Gasket/Washer made of Plastic → Chapter 39 (3926.90)
📦 II. HS Code Classification Details (2026 Latest Tariff Alignment)
Based on the provided , here are the precise HS Codes and their applicability for Printing Machine Coating Gaskets:
| HS Code | Product Description | Applicable Scenario | Material Type |
|---|---|---|---|
8487.90.00.40 |
Machinery parts... Other: Oil seals | Mechanical seals used to seal ink/solvent chambers in printing units | Metal/Rubber Composite (Oil Seal Type) |
8487.90.00.80 |
Machinery parts... Other: Other | Other machinery parts not specified elsewhere (e.g., non-standard mechanical seals) | Mixed Materials (Non-Oil Seal) |
4016.93.10.50 |
Other articles of vulcanized rubber... Gaskets, washers... Of a kind used in automotive goods | Rubber gaskets used in automotive-related printing (e.g., vehicle wrap printers, automotive paint printers) | Vulcanized Rubber |
4016.93.50.50 |
Other articles of vulcanized rubber... Gaskets, washers... Other | Standard rubber gaskets for general industrial printing machines (non-automotive) | Vulcanized Rubber |
3926.90.45.10 |
Other articles of plastics... Gaskets, washers... O-Rings | O-Rings made of plastic or coated materials for ink/solvent resistance | Plastic/Coated |
3926.90.45.90 |
Other articles of plastics... Gaskets, washers... Other | Flat plastic gaskets or washers for printing machinery | Plastic |
🔍 Key Reminder:
- Do NOT classify as "Parts of Printing Machines" (8443) unless there is no specific heading for seals/gaskets in Chapters 39-40. The U.S. Harmonized Tariff Schedule (HTS) specifically directs seals/gaskets to Chapters 39, 40, or 84 depending on type. - "Oil Seals" (8487.90.00.40) have a lower tariff (28.9%) compared to Other Machinery Parts (8487.90.00.80) which may trigger the 50% steel/aluminum surcharge (78.9%) if they contain metal components classified under certain subheadings.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: Current 2026 Tariff Schedule
🎯 1. 8487.90.00.40 —— Oil Seals (Mechanical Seals)
| Item | Details |
|---|---|
| Base Tariff | 3.9% (ad valorem) |
| Section 301 Surcharge | +25.0% |
| Total Tariff | 28.9% |
| Tax Calculation | CIF Value × 28.9% |
| De Minimis Exemption | ❌ Not Eligible (Standard threshold applies, but duties must be paid) |
| Legal Basis | HTSUS 8487.90.00.40 |
📌 Explanation:
- This is the most common and favorable classification for mechanical seals (lip seals, O-rings with metal cores) used in printing machines. - 28.9% is a manageable rate compared to other machinery parts. - Ensure the product is clearly described as an "Oil Seal" to qualify for this code.
🎯 2. 8487.90.00.80 —— Other Machinery Parts (Non-Specific)
| Item | Details |
|---|---|
| Base Tariff | 3.9% |
| Section 301 Surcharge | +25.0% |
| Steel/Aluminum Surcharge | +50.0% (If deemed to contain steel/aluminum components) |
| Total Tariff | 78.9% |
| Tax Calculation | CIF Value × 78.9% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis | HTSUS 8487.90.00.80 |
📌 Critical Warning:
- If your "Coating Gasket" contains metal components (e.g., a metal core in a rubber seal) and is not classified as an "Oil Seal," it may fall under 8487.90.00.80. - 78.9% is extremely high! Avoid this classification if possible. Classify correctly as "Oil Seal" (8487.90.00.40) if applicable.
🎯 3. 4016.93.10.50 & 4016.93.50.50 —— Rubber Gaskets
| Item | Details |
|---|---|
| Base Tariff | 2.5% |
| Section 301 Surcharge | +25.0% |
| Total Tariff | 27.5% |
| Tax Calculation | CIF Value × 27.5% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis | HTSUS 4016.93.x0.x0 |
📌 Explanation:
- 27.5% is slightly lower than the Oil Seal rate (28.9%). -4016.93.10.50is for automotive-kind gaskets. Use only if the gaskets are identical to those used in automotive printing (e.g., vehicle wrap). -4016.93.50.50is for other rubber gaskets. This is the standard classification for standard rubber O-rings or flat gaskets in general printing presses.
🎯 4. 3926.90.45.10 & 3926.90.45.90 —— Plastic Gaskets
| Item | Details |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surcharge | 0.0% |
| Total Tariff | 0.0% |
| Tax Calculation | CIF Value × 0.0% |
| De Minimis Exemption | ✅ Eligible (If value ≤ $800, no duty; if > $800, 0% duty still applies) |
| Legal Basis | HTSUS 3926.90.45.x0 |
📌 Explanation:
- 0% tariff! This is the most cost-effective classification if the product is made of plastic. -3926.90.45.10is for O-Rings. If your plastic gasket is an O-ring shape, use this. -3926.90.45.90is for other plastic gaskets. - Note: Ensure the material is purely plastic or plastic-coated. If it contains metal, it may not qualify.
🛠️ IV. Customs Clearance Practical Advice (Avoid Pitfalls)
✅ 1. Required Documentation Checklist
| Document | Mandatory | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state material (Rubber, Plastic, Metal-Rubber), shape (O-Ring, Flat, Lip Seal), and application (Ink seal, Solvent seal). |
| ✅ Material Composition Statement | ✔️ | Essential for determining Chapter 39 vs. 40 vs. 84. |
| ✅ HS Code Justification Memo | ✔️ | Explain why it is classified as "Oil Seal" (8487) or "Gasket" (39/40). |
| ✅ Commercial Invoice | ✔️ | Describe as "Coating Gasket for Printing Machine, Material: [X]" |
| ✅ Packing List | ✔️ | Ensure quantity matches invoice. |
✅ 2. Declaration Tips (Key Rules)
🔥 "Material Dictates Code, Shape Determines Subheading!"
| Scenario | Correct HS Code | Incorrect HS Code | Risk |
|---|---|---|---|
| Lip Seal with Metal Core | 8487.90.00.40 (Oil Seal) |
8487.90.00.80 (Other) |
78.9% vs 28.9% → Huge difference! |
| Standard Rubber O-Ring | 4016.93.50.50 (Rubber Gasket) |
8487.90.00.40 |
27.5% vs 28.9% (Minor difference, but accuracy matters) |
| Plastic O-Ring | 3926.90.45.10 (Plastic O-Ring) |
4016.93.50.50 |
0% vs 27.5% → Massive Savings! |
| Plastic Flat Gasket | 3926.90.45.90 (Plastic Gasket) |
3926.90.45.10 |
0% vs 0% (Same, but wrong subheading) |
📌 Critical Advice:
- If your gasket is plastic, always try to classify under 3926.90.45.10/90 for 0% tariff. - If it is rubber, classify under 4016.93.50.50 for 27.5%. - If it is an oil seal (mechanical), classify under 8487.90.00.40 for 28.9%. Avoid 8487.90.00.80 unless absolutely necessary, as the 78.9% rate is punitive.
✅ 3. Special Cases
| Scenario | Handling Suggestion |
|---|---|
| Hybrid Gaskets (Rubber + Metal) | If the rubber is the principal character, classify under 4016. If the metal core is essential for function as a seal, argue for 8487.90.00.40 (Oil Seal) to avoid the 50% steel surcharge. |
| O-Rings | Clearly state "O-Ring" in description. If plastic → 3926.90.45.10. If rubber → 4016.93.50.50. |
| Automotive Printing Gaskets | If used in automotive printing presses, consider 4016.93.10.50 (27.5%). Otherwise, use 4016.93.50.50. |
🌍 V. Global Market Comparison (2026)
| Country/Region | Recommended HS Code | Tariff Rate | Remarks |
|---|---|---|---|
| 🇺🇸 USA | 3926.90.45.10 (Plastic) |
0.0% | Best for plastic O-rings |
| 🇺🇸 USA | 4016.93.50.50 (Rubber) |
27.5% | Standard for rubber gaskets |
| 🇺🇸 USA | 8487.90.00.40 (Oil Seal) |
28.9% | For mechanical seals |
| 🇪🇺 EU | 4016.93 / 3926.90 |
Varies (0-5%) | No Section 301 tariffs. |
| 🇨🇳 China | 4016.93 / 3926.90 |
Varies (5-10%) | No additional surcharges. |
📌 Conclusion:
- USA has high tariffs on Chinese goods due to Section 301. - Plastic gaskets (3926) are the most tariff-efficient for US import. - Rubber gaskets (4016) are the second best (27.5%). - Avoid "Other Machinery Parts" (8487.90.00.80) due to the 78.9% rate.
📌 VI. Common Mistakes & Pitfalls (Blood Lessons)
❌ Mistake 1: Classifying all gaskets under "Parts of Printing Machines" (8443)
👉 Consequence: Incorrect classification. Gaskets have specific headings in Chapters 39, 40, and 84. This can lead to audit issues and penalties.
❌ Mistake 2: Using 8487.90.00.80 for an Oil Seal
👉 Consequence: 78.9% Tariff instead of 28.9%. Loss of $50,000 per $100,000 shipment!
❌ Mistake 3: Not specifying material in the declaration
👉 Consequence: Customs will default to the highest duty rate (often 8487.90.00.80 or higher). Delay + Extra Duty.
❌ Mistake 4: Claiming "O-Ring" for a flat gasket
👉 Consequence: Misdeclaration. May lead to fine or refusal of entry.
✅ Correct Approach:
"Printing Machine Coating Gasket, Material: [Plastic/Rubber/Metal-Rubber], Type: [O-Ring/Flat/Lip Seal], for Use in [Ink/Solvent] Systems"
🎯 VII. Conclusion: Precise Classification, Maximum Savings!
🎯 Remember the Mantra:
🔹 "Plastic Gasket = 0%, Rubber = 27.5%, Oil Seal = 28.9%, Other Parts = 78.9%!"
🔹 "Material is King, Shape is Queen, Code is Life!"
📌 Pro Tip:
- For Plastic O-Rings, always use
3926.90.45.10for 0% duty.- For Rubber Gaskets, use
4016.93.50.50for 27.5%.- For Mechanical Oil Seals, use
8487.90.00.40for 28.9%.- NEVER use
8487.90.00.80unless you have no other option and accept the 78.9% hit.
📣 Immediate Action:
📞 Contact your customs broker with the Material Specification and Product Image.
🚀 Request an Advance Ruling if the classification is ambiguous.
💼 Save money by classifying correctly!
✨ Professional clearance starts with accurate HS Code!
💼 Every percentage point saved is pure profit!
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。