Raw Materials (Cubic Centimeters)

🌐 Raw Materials (Cubic Centimeters) – HS Code & Tariff Guide | 2026 Updated Customs Classification & Compliance Strategy

📌 One: Product Definition & Classification – What Exactly Are "Raw Materials (Cubic Centimeters)"?

In international trade, "Raw Materials (Cubic Centimeters)" is a generic term used to describe bulk liquid or semi-liquid raw materials measured in volume (cm³), typically used in industrial, chemical, pharmaceutical, or manufacturing processes.

⚠️ Key Clarification: - This term does not refer to solid raw materials (e.g., iron scrap, plastic pellets). - It applies only to fluids (liquids or viscous substances) measured by volume, not weight. - Common examples include: - Industrial solvents (e.g., acetone, ethanol) - Chemical reagents - Adhesives & sealants - Lubricants - Polymer precursors (e.g., monomers) - Resins (liquid form)

🔍 Critical Note:
If the material is solid, granular, or pelletized, it should not be classified under this category. It must be liquid or semi-liquid and measured in cm³.

📦 Two: HS Code Classification Breakdown (2026 Official Tariff Reference)

📌 Important Observation: - None of the listed HS codes apply to raw materials measured in cubic centimeters (cm³). - All listed items are solid waste/scrap, measured by weight, not volume. - "Cubic centimeters" is not a valid classification criterion in these codes.

❌ Misclassification Risk:
Do not label liquid raw materials (e.g., liquid resin, solvent) as 7204.49.00.80 or 3915.90.00.90 — this is incorrect and will trigger penalties.

💰 Three: 2026 Tariff Breakdown – Full Tax Clause Analysis (US Market)

✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 (inclusive)

🎯 1. 7204.49.00.80 — Ferrous Waste & Scrap (Other)

📌 Explanation:
- This code applies only to ferrous scrap, not liquid raw materials. - The 45% total is due to dual附加 taxes from USITC and IEEPA. - No volume-based exemption — applies regardless of measurement unit.

🎯 2. 7204.41.00.80 — Ferrous Turnings & Shavings

📌 Note:
- Applies to metallic chips, turnings, filings — not liquids. - Even if measured in cm³, it's still weight-based for customs.

🎯 3. 7404.00.60.90 — Copper Alloy Scrap

📌 Clarification:
- Applies to copper alloy waste, not liquid raw materials. - Even if the scrap is granular and could be loosely measured by volume, customs still uses weight.

🎯 4. 7404.00.60.20 — Refined Copper Scrap

📌 Key Point:
- Refined copper scrap is still solid, not liquid, so volume (cm³) is irrelevant.

🎯 5. 3915.90.00.90 — Other Plastic Waste (Non-PET)

📌 Note:
- Applies to plastic waste, not raw liquid materials. - Even if pellets are measured in cm³, customs uses weight.

🎯 6. 3915.90.00.10 — PET Plastic Scrap

📌 Final Note:
- None of these HS codes apply to raw materials measured in cm³. - Liquid raw materials must be classified under different HS codes (e.g., 2900 series, 3800 series).

🛠️ Four: Customs Clearance Recommendations (Pro Tips to Avoid Penalties)

✅ 1. Documentation Checklist (Mandatory)

✅ 2. Correct HS Code for Liquid Raw Materials (Example)

📌 For liquid raw materials measured in cm³, use appropriate chemical or polymer HS codes, such as:

✅ Do NOT use 7204.49.00.80 or 3915.90.00.90 for liquids — this is incorrect and risky.

✅ 3. 申报技巧 (Golden Rule)

🔥 “Volume ≠ HS Code – Check the Physical Form First!”

🌍 Five: Global Market Comparison (2026)

📌 Conclusion:
- Only the U.S. applies the 25% + 10%附加 tax. - China-origin liquid raw materials face 45% total duty. - Always verify the physical state before declaring.

📌 Six: Common Mistakes & How to Avoid Them

❌ Mistake 1: Using 3915.90.00.90 for liquid plastic resin
👉 Result: Misclassification → 45% penalty + seizure

❌ Mistake 2: Labeling copper powder as 7404.00.60.90 but measuring in cm³
👉 Result: Customs may question volume vs. weight → delayed release

❌ Mistake 3: Not providing SDS for hazardous liquids
👉 Result: Detention at port or refusal of entry

✅ Best Practice:

Use precise language:
“Liquid Epoxy Resin, 500 cm³ per bottle, Density: 1.1 g/cm³, SDS Attached, HS Code: 3907.30.00.00”

🎯 Seven: Final Verdict – The Truth About “Raw Materials (cm³)”

❌ "Raw Materials (Cubic Centimeters)" is NOT a valid HS code category.
❌ None of the listed HS codes apply to volume-based liquid raw materials.
✅ Use chemical-specific HS codes (e.g., 2900, 3800, 3900 series) for liquids.

📌 Key Takeaway:
Volume (cm³) is not a classification criterion in customs. Physical form (solid/liquid) is.

📣 Call to Action: Avoid Costly Mistakes Today!

📞 Contact a licensed customs broker + provide: - Product photos - SDS - Volume & density data - Origin documents

🚀 Request a pre-ruling (Advance Ruling) for your liquid raw material to lock in the correct HS code and avoid future disputes.

✨ Professional Customs, Precision First!
💼 Your compliance starts with the right HS code — not the wrong one!