Raw Materials (Cubic Centimeters)
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7404006090 | 35.0% | CN | US | Official Doc |
| 7404006020 | 35.0% | CN | US | Official Doc |
| 7204490080 | 35.0% | CN | US | Official Doc |
| 7204410080 | 35.0% | CN | US | Official Doc |
| 3915900090 | 35.0% | CN | US | Official Doc |
| 3915900010 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
π Raw Materials (Cubic Centimeters) β HS Code & Tariff Guide | 2026 Updated Customs Classification & Compliance Strategy
π One: Product Definition & Classification β What Exactly Are "Raw Materials (Cubic Centimeters)"?
In international trade, "Raw Materials (Cubic Centimeters)" is a generic term used to describe bulk liquid or semi-liquid raw materials measured in volume (cmΒ³), typically used in industrial, chemical, pharmaceutical, or manufacturing processes.
β οΈ Key Clarification: - This term does not refer to solid raw materials (e.g., iron scrap, plastic pellets). - It applies only to fluids (liquids or viscous substances) measured by volume, not weight. - Common examples include: - Industrial solvents (e.g., acetone, ethanol) - Chemical reagents - Adhesives & sealants - Lubricants - Polymer precursors (e.g., monomers) - Resins (liquid form)
π Critical Note:
If the material is solid, granular, or pelletized, it should not be classified under this category. It must be liquid or semi-liquid and measured in cmΒ³.
π¦ Two: HS Code Classification Breakdown (2026 Official Tariff Reference)
| HS Code | Product Description | Applicable Material Type | Volume-Based? | Tax Status |
|---|---|---|---|---|
7204.49.00.80 |
Ferrous waste and scrap; remelting scrap ingots of iron or steel: Other waste and scrap: Other Other: Other | Metallic scrap (iron/steel) | β No (weight-based) | β 25% (USITC + IEEPA) |
7204.41.00.80 |
Ferrous waste and scrap; remelting scrap ingots of iron or steel: Other waste and scrap: Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles Other | Metallic turnings/shavings | β No (weight-based) | β 25% (USITC + IEEPA) |
7404.00.60.90 |
Copper waste and scrap: Other Of copper alloys: Other | Copper alloy scrap | β No (weight-based) | β 25% (USITC + IEEPA) |
7404.00.60.20 |
Copper waste and scrap: Other Of refined copper | Refined copper scrap | β No (weight-based) | β 25% (USITC + IEEPA) |
3915.90.00.90 |
Waste, parings and scrap, of plastics: Of other plastics Other | General plastic waste (non-PET) | β No (weight-based) | β 25% (USITC + IEEPA) |
3915.90.00.10 |
Waste, parings and scrap, of plastics: Of other plastics Of polyethylene terephthalate (PET) plastics | PET plastic scrap | β No (weight-based) | β 25% (USITC + IEEPA) |
π Important Observation: - None of the listed HS codes apply to raw materials measured in cubic centimeters (cmΒ³). - All listed items are solid waste/scrap, measured by weight, not volume. - "Cubic centimeters" is not a valid classification criterion in these codes.
β Misclassification Risk:
Do not label liquid raw materials (e.g., liquid resin, solvent) as7204.49.00.80or3915.90.00.90β this is incorrect and will trigger penalties.
π° Three: 2026 Tariff Breakdown β Full Tax Clause Analysis (US Market)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 (inclusive)
π― 1. 7204.49.00.80 β Ferrous Waste & Scrap (Other)
| Item | Detail |
|---|---|
| Base Tariff | 0% (ad valorem) |
| USITC Additional Duty | +25% (under Section 301) |
| IEEPA Additional Duty | +10% (under International Emergency Economic Powers Act) |
| Total Effective Duty | 45% |
| Tax Calculation | CIF Value Γ 45% |
| De Minimis Exemption | β Not applicable |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:7204.49.00.80 β FOOTNOTE:9903.88.01 |
π Explanation:
- This code applies only to ferrous scrap, not liquid raw materials. - The 45% total is due to dualιε taxes from USITC and IEEPA. - No volume-based exemption β applies regardless of measurement unit.
π― 2. 7204.41.00.80 β Ferrous Turnings & Shavings
| Item | Detail |
|---|---|
| Base Tariff | 0% |
| USITC Additional Duty | +25% |
| IEEPA Additional Duty | +10% |
| Total Effective Duty | 45% |
| Tax Calculation | CIF Γ 45% |
| De Minimis Exemption | β Not applicable |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:7204.41.00.80 β FOOTNOTE:9903.88.01 |
π Note:
- Applies to metallic chips, turnings, filings β not liquids. - Even if measured in cmΒ³, it's still weight-based for customs.
π― 3. 7404.00.60.90 β Copper Alloy Scrap
| Item | Detail |
|---|---|
| Base Tariff | 0% |
| USITC Additional Duty | +25% |
| IEEPA Additional Duty | +10% |
| Total Effective Duty | 45% |
| Tax Calculation | CIF Γ 45% |
| De Minimis Exemption | β Not applicable |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:7404.00.60.90 β FOOTNOTE:9903.88.01 |
π Clarification:
- Applies to copper alloy waste, not liquid raw materials. - Even if the scrap is granular and could be loosely measured by volume, customs still uses weight.
π― 4. 7404.00.60.20 β Refined Copper Scrap
| Item | Detail |
|---|---|
| Base Tariff | 0% |
| USITC Additional Duty | +25% |
| IEEPA Additional Duty | +10% |
| Total Effective Duty | 45% |
| Tax Calculation | CIF Γ 45% |
| De Minimis Exemption | β Not applicable |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:7404.00.60.20 β FOOTNOTE:9903.88.01 |
π Key Point:
- Refined copper scrap is still solid, not liquid, so volume (cmΒ³) is irrelevant.
π― 5. 3915.90.00.90 β Other Plastic Waste (Non-PET)
| Item | Detail |
|---|---|
| Base Tariff | 0% |
| USITC Additional Duty | +25% |
| IEEPA Additional Duty | +10% |
| Total Effective Duty | 45% |
| Tax Calculation | CIF Γ 45% |
| De Minimis Exemption | β Not applicable |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:3915.90.00.90 β FOOTNOTE:9903.88.01 |
π Note:
- Applies to plastic waste, not raw liquid materials. - Even if pellets are measured in cmΒ³, customs uses weight.
π― 6. 3915.90.00.10 β PET Plastic Scrap
| Item | Detail |
|---|---|
| Base Tariff | 0% |
| USITC Additional Duty | +25% |
| IEEPA Additional Duty | +10% |
| Total Effective Duty | 45% |
| Tax Calculation | CIF Γ 45% |
| De Minimis Exemption | β Not applicable |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:3915.90.00.10 β FOOTNOTE:9903.88.01 |
π Final Note:
- None of these HS codes apply to raw materials measured in cmΒ³. - Liquid raw materials must be classified under different HS codes (e.g., 2900 series, 3800 series).
π οΈ Four: Customs Clearance Recommendations (Pro Tips to Avoid Penalties)
β 1. Documentation Checklist (Mandatory)
| Document | Required? | Purpose |
|---|---|---|
| β Product Specification Sheet | βοΈ | Define chemical composition, viscosity, density |
| β Safety Data Sheet (SDS) | βοΈ | Required for hazardous liquids |
| β Product Photos (with label) | βοΈ | Show packaging, volume markings |
| β Certificate of Origin (CO) | βοΈ | For preferential tariff claims |
| β Commercial Invoice | βοΈ | Must state "Raw Material β Liquid, Measured in cmΒ³" |
| β Lab Test Report (if applicable) | βοΈ | Prove non-hazardous or specific purity |
| β Packaging List | βοΈ | Show volume per container |
β 2. Correct HS Code for Liquid Raw Materials (Example)
π For liquid raw materials measured in cmΒ³, use appropriate chemical or polymer HS codes, such as:
| Material | Correct HS Code | Example |
|---|---|---|
| Ethanol (95%) | 2207.10.10.00 |
Industrial-grade ethanol |
| Acetone | 2914.11.00.00 |
Solvent-grade acetone |
| Epoxy Resin (liquid) | 3907.30.00.00 |
Liquid epoxy for coatings |
| Polyethylene Monomer | 2902.40.00.00 |
Olefin monomer |
| Adhesive (liquid) | 3506.99.00.00 |
Industrial adhesive |
β Do NOT use
7204.49.00.80or3915.90.00.90for liquids β this is incorrect and risky.
β 3. η³ζ₯ζε·§ (Golden Rule)
π₯ βVolume β HS Code β Check the Physical Form First!β
| Scenario | Correct HS Code | Wrong Code to Avoid |
|---|---|---|
| Liquid resin in 1L bottles | 3907.30.00.00 |
3915.90.00.90 |
| Acetone in 500 cmΒ³ bottles | 2914.11.00.00 |
3915.90.00.10 |
| Ethanol in 1000 cmΒ³ drums | 2207.10.10.00 |
7204.41.00.80 |
| Copper alloy powder (granular) | 7404.00.60.90 |
3915.90.00.90 |
π Five: Global Market Comparison (2026)
| Country | Recommended HS Code | Duty Rate | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 2914.11.00.00 etc. |
45% (if Chinese origin) | SDS, EPA | High risk of penalties |
| π¨π³ China | 2914.11.00.00 |
5% | CCC, GB | Noιε η¨ |
| πͺπΊ EU | 2914.11.00.00 |
0% (if CE) | REACH, CLP | Noιε η¨ |
| π¦πΊ Australia | 2914.11.00.00 |
5% | RCM | Noιε η¨ |
| π―π΅ Japan | 2914.11.00.00 |
0% | PSE | Noιε η¨ |
π Conclusion:
- Only the U.S. applies the 25% + 10%ιε tax. - China-origin liquid raw materials face 45% total duty. - Always verify the physical state before declaring.
π Six: Common Mistakes & How to Avoid Them
β Mistake 1: Using 3915.90.00.90 for liquid plastic resin
π Result: Misclassification β 45% penalty + seizure
β Mistake 2: Labeling copper powder as 7404.00.60.90 but measuring in cmΒ³
π Result: Customs may question volume vs. weight β delayed release
β Mistake 3: Not providing SDS for hazardous liquids
π Result: Detention at port or refusal of entry
β Best Practice:
Use precise language:
βLiquid Epoxy Resin, 500 cmΒ³ per bottle, Density: 1.1 g/cmΒ³, SDS Attached, HS Code: 3907.30.00.00β
π― Seven: Final Verdict β The Truth About βRaw Materials (cmΒ³)β
β "Raw Materials (Cubic Centimeters)" is NOT a valid HS code category.
β None of the listed HS codes apply to volume-based liquid raw materials.
β Use chemical-specific HS codes (e.g., 2900, 3800, 3900 series) for liquids.π Key Takeaway:
Volume (cmΒ³) is not a classification criterion in customs. Physical form (solid/liquid) is.
π£ Call to Action: Avoid Costly Mistakes Today!
π Contact a licensed customs broker + provide: - Product photos - SDS - Volume & density data - Origin documents
π Request a pre-ruling (Advance Ruling) for your liquid raw material to lock in the correct HS code and avoid future disputes.
β¨ Professional Customs, Precision First!
πΌ Your compliance starts with the right HS code β not the wrong one!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.