Rust Screw Removal Machine

🛠️ Rust Screw Removal Machine (Power Tools for Metal Working)

🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Rust Screw Removal Machines"?

A Rust Screw Removal Machine (commonly known as an electric nut runner, heavy-duty impact wrench, or screw extraction tool) is a handheld power tool designed to loosen, remove, or extract stuck, rusted, or over-tightened screws, bolts, and nuts. In international trade, these tools are classified based on their drive mechanism, motor type, and application.

Key Classification Criteria: * Handheld Power Tool: Must be designed to be held in the hand during operation. * Self-Contained Electric Motor: The tool must have its own battery or power cord; pneumatic/hydraulic tools have different classifications. * Chuck Capacity: The size of the socket or chuck determines the specific sub-heading for electric drills/drivers. * Function: "Drilling/Boring" vs. "Rotary/Other" vs. "Metal Working".

⚠️ Critical Distinction:
- If the tool is primarily a drill (uses a chuck/drill bit) with a chuck capacity < 12.7 mm (0.5 inches) → It falls under 8467.21.00.30.
- If the tool is an impact wrench/nut runner designed specifically for metal working (bolts/screws in metal structures) and does not fit the strict "drill with small chuck" definition → It may fall under 8467.89.10.00 (Other tools suitable for metal working).
- Note: Many heavy-duty "screw removal" machines are essentially impact wrenches. If classified as a "drill" with a chuck >12.7mm, they might go to 8467.21.00.90 or 8467.29.00.00. However, based on the provided <DATA>, we focus on the two specific codes given.

📦 II. HS Code Classification Details (Based on Provided Data)

🔍 Focus Reminder:
- 8467.21.00.30: Strictly for electric drills/drivers where the chuck capacity is LESS than 12.7 mm. This is typical for small screwdrivers or light-duty drills.
- 8467.89.10.00: Covers other hand tools that are suitable for metal working. This is the broader category for impact wrenches, nut runners, and specialized rust removal tools that don't fit the specific "small chuck drill" definition.

💰 III. 2026 Latest Tariff Rate Details (Including Additional Taxes)

✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: 2025/2026 (Based on current trade policies)

🎯 1. 8467.21.00.30 —— Power Hand Tools (Drills, Chuck < 12.7 mm)

📌 Explanation:
- This specific subheading for electric drills with small chucks currently enjoys a 0% tariff under the provided data.
- No additional Section 301 or IEEPA tariffs are listed for this specific code in the provided data.
- Cost Advantage: This is the most cost-effective classification if your tool qualifies as a "drill with chuck < 12.7 mm".

🎯 2. 8467.89.10.00 —— Other Hand Tools (Suitable for Metal Working)

📌 Explanation:
- The base tariff is 0%, but a 7.5% additional tariff applies due to Section 301 trade measures against China.
- This code covers other metal-working tools (like impact wrenches/nut runners) that are not strictly "drills with small chucks".
- Cost Impact: You will pay 7.5% of the CIF value in additional duties.

🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)

✅ 1. Required Documentation List (Non-Negotiable)

✅ 2. Declaration Tips (Critical Keywords)

🔥 “Define Function, Size & Material — Avoid Misclassification!”

📌 Key Tip:
- If your "Rust Screw Removal Machine" is a compact electric driver with a keyless chuck < 0.5 inches, use 8467.21.00.30 for 0% tax.
- If it’s a heavy-duty impact wrench with a square drive (no chuck), use 8467.89.10.00 and accept the 7.5% tax.

✅ 3. Special Cases

🌍 V. Global Market Clearance Comparison (2026)

📌 Conclusion:
- The USA offers 0% duty for the specific code 8467.21.00.30, making it highly attractive if your product fits the < 12.7 mm chuck criteria.
- For larger impact tools, the 7.5% additional tax is unavoidable under current Section 301 rules.

📌 VI. Common Mistakes & Pitfalls (Lessons Learned)

❌ Mistake 1: Classifying an impact wrench (no chuck) as a drill with small chuck (8467.21.00.30)
👉 Consequence: Customs audit → Re-classification to 8467.89.10.00 → Back taxes + Penalties.

❌ Mistake 2: Not specifying Chuck Size in description
👉 Consequence: Customs assumes worst-case scenario → Higher duty or delay.

❌ Mistake 3: Using vague terms like "Screw Remover" without technical specs
👉 Consequence: Customs cannot verify function → Inspection delay.

✅ Correct Declaration Example:

"Electric Hand Tool for Removing Rusted Screws, Self-Contained Motor, Chuck Capacity 10mm, for Metal Working, Model XYZ, FCC Certified"

🎯 VII. Conclusion: Professional Declaration, Cost Savings!

🎯 Remember:

🔹 “Small Chuck (<12.7mm) = 0% Tax. Metal Working Tool = 7.5% Tax.”
🔹 “Impact Wrench ≠ Drill. Be precise!”

📌 Pro Tip:
If your tool has a chuck exactly 12.7 mm or larger, it does NOT qualify for 8467.21.00.30. You must look for other codes (not in provided data). Check your product specs carefully!

📣 Action Required:

📞 Contact a licensed customs broker + Provide Product Photos + Verify Chuck/Drive Size
🚀 Save 7.5% on every shipment if you qualify for 0%!

✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Every Percent Counts in International Trade!