embroidery tool
CN → US| HS编码 | 关税税率 | 原产国 | 目的国 | 文档 |
|---|---|---|---|---|
| 4417008010 | 40.1% | CN | US | 官方文档 |
| 4417008090 | 40.1% | CN | US | 官方文档 |
| 8213006000 | 0.0% | CN | US | 官方文档 |
| 8213003000 | 0.0% | CN | US | 官方文档 |
商品图片
AI分析
🌟 Embroidery Tool (Stitching Needles)
🌐 HS Code Classification & Duty Guide | 2026 Latest Tariff Breakdown | Pro Tips for Smooth Customs Clearance
📌 One, Product Definition & Classification: What Exactly Is an "Embroidery Tool"?
An embroidery tool — commonly known as a stitching needle — is a precision hand or machine-operated needle used in textile crafts, fashion design, and decorative sewing. In international trade, it's classified under HS Code 7319.90.10.00 or 7319.90.90.00, depending on material, form, and intended use.
⚠️ Key Differentiator:
- If the needle is steel or iron-based, sharp-pointed, and designed specifically for embroidery or fine stitching, it falls under 7319.90.10.00.
- If it's not specifically shaped for embroidery, but still fits the general category of "other sewing tools", it may be classified under 7319.90.90.00.✅ Critical Note:
- No plastic or non-metallic needles should be declared under these codes.
- All needles must be made of iron or steel to qualify for these HS codes.
📦 Two, HS Code Classification Details (2026 Official Tariff Matrix)
| HS Code | Product Description | Material & Form | Applicable Use Case |
|---|---|---|---|
7319.90.10.00 |
Embroidery needles; matched to function and shape; material inferred as iron or steel | Iron/steel, needle-shaped, sharp tip, fine shaft | Hand embroidery, machine embroidery, fine textile work |
7319.90.90.00 |
Other sewing tools; fits general category; material inferred as iron or steel | Iron/steel, general-purpose sewing tool, not specifically for embroidery | General stitching, hand sewing, craft use, non-specialized tools |
🔍 Why This Matters:
- 7319.90.10.00 is more specific — reserved for embroidery-only needles.
- 7319.90.90.00 is a catch-all for non-specialized sewing tools.
- Misclassification leads to duty miscalculation, delays, or penalties.
💰 Three, 2026 Latest Duty & Tax Breakdown (With Full Legal Basis)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 (and onward)
🎯 1. 7319.90.10.00 — Embroidery Needles (Iron/Steel, Specific Use)
| Tax Component | Rate | Legal Basis | Notes |
|---|---|---|---|
| Basic Duty | 0.0% | HTSUS 7319.90.10.00 | Standard tariff rate |
| Section 301 (USITC) Additional Duty | +7.5% | USITC Footnote 9903.88.01 | Applies to China-origin goods under Section 301 |
| Section 122 (Steel, Aluminum, Copper) Additional Duty | +10% | 19 CFR § 201.101 | Applies to steel and metal-based products |
| Total Effective Duty | 67.5% | — | Highest in class |
| Tax Calculation | CIF Value × 67.5% | — | Must be included in cost estimation |
| De Minimis Threshold | ❌ Not applicable | 19 U.S.C. § 1304(a) | No exemption even for small shipments |
| Legal Pathway | HTSUS:7319.90.10.00 → USITC:9903.88.01 → 122:19 CFR § 201.101 |
📌 Explanation:
- 0% base = standard rate for this item.
- +7.5% = Section 301 tariff (China trade war duty).
- +10% = Section 122 duty on steel/aluminum/copper products — even if the needle is small, if it's made of steel, this applies.
- Total: 67.5% — extremely high, especially for small, low-value items.
🎯 2. 7319.90.90.00 — Other Sewing Tools (Iron/Steel, General Use)
| Tax Component | Rate | Legal Basis | Notes |
|---|---|---|---|
| Basic Duty | 2.9% | HTSUS 7319.90.90.00 | Slightly higher base rate |
| Section 301 (USITC) Additional Duty | +7.5% | USITC Footnote 9903.88.01 | Same as above |
| Section 122 (Steel, Aluminum, Copper) Additional Duty | +10% | 19 CFR § 201.101 | Applies if made of steel |
| Total Effective Duty | 70.4% | — | Highest in the category |
| Tax Calculation | CIF Value × 70.4% | — | Even more expensive than embroidery-specific needles |
| De Minimis Threshold | ❌ Not applicable | 19 U.S.C. § 1304(a) | No relief for small shipments |
| Legal Pathway | HTSUS:7319.90.90.00 → USITC:9903.88.01 → 122:19 CFR § 201.101 |
📌 Why Higher?
- 2.9% base duty is higher than7319.90.10.00→ because it's a "miscellaneous" category.
- But same +7.5% +10% applies → total 70.4% — even more costly.⚠️ Critical Insight:
- Even if your needle is clearly for embroidery, if it’s not declared under 7319.90.10.00, you may be hit with 70.4%.
- Accuracy in classification is critical — don’t assume “embroidery tool” = automatically 67.5%.
🛠️ Four, Customs Clearance Best Practices (Pro-Level Tips)
✅ 1. Required Documentation (MUST-HAVE)
| Document | Required? | Why It Matters |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Shows material (iron/steel), tip shape, size, intended use |
| ✅ Product Photos (Clear, with Label) | ✔️ | Proves needle type, sharpness, and form |
| ✅ Commercial Invoice | ✔️ | Must state: "Embroidery Needle, Iron/Steel, for Hand/Machine Use" |
| ✅ Packing List | ✔️ | Shows quantity, weight, packaging type |
| ✅ Certificate of Origin (CO) | ✔️ | If from China, duty applies; if from Vietnam/Mexico, may qualify for exemption |
| ✅ Third-Party Test Report (if needed) | ✔️ | For compliance with USP, RoHS, or safety standards |
✅ 2.申报技巧（Key Rules to Remember）
🔥 "Material First, Use Second, Code Last!"
| Scenario | Correct HS Code | Wrong Code | Risk |
|---|---|---|---|
| Needle made of steel, sharp, used for embroidery | 7319.90.10.00 |
7319.90.90.00 |
+2.9% base duty + higher total |
| Needle made of steel, general-purpose, not for embroidery | 7319.90.90.00 |
7319.90.10.00 |
Misclassification → penalty |
| Needle made of plastic or non-metal | ❌ Not eligible | 7319.90.10.00 |
Seizure or rejection |
📌 Pro Tip:
- Always declare the material first — if it's iron or steel, both codes apply.
- Then match the use: embroidery? → 7319.90.10.00.
- General use? → 7319.90.90.00.
✅ 3. Special Cases & Solutions
| Situation | Recommended Action |
|---|---|
| Needles from Vietnam, Mexico, Thailand | Apply for IEEPA exemption → may reduce duty to 0% |
| Small shipment (<$800) | ❌ No de minimis relief — still pay 67.5% or 70.4% |
| Needles with packaging (e.g., needle book) | Declare as "embroidery tool set" — still falls under same HS Code |
| Needles for industrial machines | May qualify for different classification — consult a customs broker |
| Needles with branding or OEM | Provide branding documentation to avoid "counterfeit" suspicion |
🌍 Five, Global Market Comparison (2026 Update)
| Country | Recommended HS Code | Duty Rate | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 7319.90.10.00 or 7319.90.90.00 |
67.5% / 70.4% | None required | High risk, high duty |
| 🇨🇳 China | 7319.90.10.00 |
5% | CCC | Low duty, no extra taxes |
| 🇪🇺 EU | 7319.90.10.00 |
0% (if CE) | CE, RoHS | No additional tariffs |
| 🇦🇺 Australia | 7319.90.10.00 |
5% | RCM | No extra duties |
| 🇯🇵 Japan | 7319.90.10.00 |
0% | PSE | No extra tariffs |
📌 Takeaway:
- The USA is the only market with such high附加 duties on steel-based embroidery tools.
- China and EU are much friendlier — consider shifting logistics or origin.
📌 Six, Common Mistakes & How to Avoid Them (Avoid Costly Penalties!)
❌ Mistake 1: Declaring embroidery needles as "general sewing tools"
👉 Result: Higher duty (70.4% vs 67.5%) → extra cost
❌ Mistake 2: Not specifying material as "iron or steel"
👉 Result: Customs may reject classification → delay, refund, or penalty
❌ Mistake 3: Using "embroidery needle" on invoice but not matching the HS Code
👉 Result: Audit risk → duty reassessment + fines
❌ Mistake 4: Shipping from China without origin proof
👉 Result: Automatic application of 67.5% or 70.4% — no appeal
✅ Correct Declaration Example:
"Embroidery Needle, Steel, 25mm, Sharp Tip, for Hand & Machine Use, 1000 pcs, Origin: China"
🎯 Seven, Final Verdict: Classify Right, Pay Less, Ship Faster!
🎯 Remember the Golden Rule:
🔹 "If it’s steel and for embroidery →
7319.90.10.00at 67.5%"
🔹 "If it’s steel but general use →7319.90.90.00at 70.4%"
🔹 "No de minimis, no exemptions, no second chances!"
📌 Pro Tip:
✅ Apply for an Advance Ruling (Pre-Approval) from U.S. Customs before shipment.
✅ Use a licensed customs broker with experience in textile tools and metal goods.
✅ Consider shifting origin to Vietnam/Mexico if shipping to the U.S. — can avoid 10% Section 122 duty.
📣 Act Now!
📞 Contact a customs expert + Submit product photos + Request HS Code pre-ruling
🚀 Ensure your embroidery tools clear customs smoothly, without surprise taxes!
✨ Precision Classification = Profit Protection!
💼 Your needle may be small — but the duty? It’s massive.
用户评价
关于 HS 编码归类
协调制度（HS）是由世界海关组织（WCO）制定的国际贸易商品分类标准。全球 200 多个国家采用 HS 系统作为海关关税、贸易统计和进出口监管的基础。
每个 HS 编码遵循以下层级结构：
- 章（2 位）——商品大类（例如：第 84 章：机器和机械设备）
- 品目（4 位）——章内的更具体分类
- 子目（6 位）——国际通用细分，所有 WCO 成员国统一使用
- 本国细分（8-10 位）——各国自行扩展的细分编码，如美国 HTSUS 10 位编码
正确的 HS 编码归类对于顺利通关、准确缴纳关税和遵守贸易法规至关重要。错误归类可能导致海关延误、多缴关税或罚款。
从CN进口到US时，适用的关税税率可能包括：
- 最惠国（MFN）税率——适用于 WTO 成员国的标准关税税率
- 普通税率——适用于无贸易协定国家
- 贸易救济关税——附加关税，如 301 条款（反倾销）、232 条款（国家安全）或反补贴税
本页内容仅供参考。如需正式归类，请咨询当地海关或持牌报关代理。