embroidery tool
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4417008010 | 40.1% | CN | US | Official Doc |
| 4417008090 | 40.1% | CN | US | Official Doc |
| 8213006000 | 0.0% | CN | US | Official Doc |
| 8213003000 | 0.0% | CN | US | Official Doc |
Product Images
AI Analysis
π Embroidery Tool (Stitching Needles)
π HS Code Classification & Duty Guide | 2026 Latest Tariff Breakdown | Pro Tips for Smooth Customs Clearance
π One, Product Definition & Classification: What Exactly Is an "Embroidery Tool"?
An embroidery tool β commonly known as a stitching needle β is a precision hand or machine-operated needle used in textile crafts, fashion design, and decorative sewing. In international trade, it's classified under HS Code 7319.90.10.00 or 7319.90.90.00, depending on material, form, and intended use.
β οΈ Key Differentiator:
- If the needle is steel or iron-based, sharp-pointed, and designed specifically for embroidery or fine stitching, it falls under 7319.90.10.00.
- If it's not specifically shaped for embroidery, but still fits the general category of "other sewing tools", it may be classified under 7319.90.90.00.β Critical Note:
- No plastic or non-metallic needles should be declared under these codes.
- All needles must be made of iron or steel to qualify for these HS codes.
π¦ Two, HS Code Classification Details (2026 Official Tariff Matrix)
| HS Code | Product Description | Material & Form | Applicable Use Case |
|---|---|---|---|
7319.90.10.00 |
Embroidery needles; matched to function and shape; material inferred as iron or steel | Iron/steel, needle-shaped, sharp tip, fine shaft | Hand embroidery, machine embroidery, fine textile work |
7319.90.90.00 |
Other sewing tools; fits general category; material inferred as iron or steel | Iron/steel, general-purpose sewing tool, not specifically for embroidery | General stitching, hand sewing, craft use, non-specialized tools |
π Why This Matters:
- 7319.90.10.00 is more specific β reserved for embroidery-only needles.
- 7319.90.90.00 is a catch-all for non-specialized sewing tools.
- Misclassification leads to duty miscalculation, delays, or penalties.
π° Three, 2026 Latest Duty & Tax Breakdown (With Full Legal Basis)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 (and onward)
π― 1. 7319.90.10.00 β Embroidery Needles (Iron/Steel, Specific Use)
| Tax Component | Rate | Legal Basis | Notes |
|---|---|---|---|
| Basic Duty | 0.0% | HTSUS 7319.90.10.00 | Standard tariff rate |
| Section 301 (USITC) Additional Duty | +7.5% | USITC Footnote 9903.88.01 | Applies to China-origin goods under Section 301 |
| Section 122 (Steel, Aluminum, Copper) Additional Duty | +10% | 19 CFR Β§ 201.101 | Applies to steel and metal-based products |
| Total Effective Duty | 67.5% | β | Highest in class |
| Tax Calculation | CIF Value Γ 67.5% | β | Must be included in cost estimation |
| De Minimis Threshold | β Not applicable | 19 U.S.C. Β§ 1304(a) | No exemption even for small shipments |
| Legal Pathway | HTSUS:7319.90.10.00 β USITC:9903.88.01 β 122:19 CFR Β§ 201.101 |
π Explanation:
- 0% base = standard rate for this item.
- +7.5% = Section 301 tariff (China trade war duty).
- +10% = Section 122 duty on steel/aluminum/copper products β even if the needle is small, if it's made of steel, this applies.
- Total: 67.5% β extremely high, especially for small, low-value items.
π― 2. 7319.90.90.00 β Other Sewing Tools (Iron/Steel, General Use)
| Tax Component | Rate | Legal Basis | Notes |
|---|---|---|---|
| Basic Duty | 2.9% | HTSUS 7319.90.90.00 | Slightly higher base rate |
| Section 301 (USITC) Additional Duty | +7.5% | USITC Footnote 9903.88.01 | Same as above |
| Section 122 (Steel, Aluminum, Copper) Additional Duty | +10% | 19 CFR Β§ 201.101 | Applies if made of steel |
| Total Effective Duty | 70.4% | β | Highest in the category |
| Tax Calculation | CIF Value Γ 70.4% | β | Even more expensive than embroidery-specific needles |
| De Minimis Threshold | β Not applicable | 19 U.S.C. Β§ 1304(a) | No relief for small shipments |
| Legal Pathway | HTSUS:7319.90.90.00 β USITC:9903.88.01 β 122:19 CFR Β§ 201.101 |
π Why Higher?
- 2.9% base duty is higher than7319.90.10.00β because it's a "miscellaneous" category.
- But same +7.5% +10% applies β total 70.4% β even more costly.β οΈ Critical Insight:
- Even if your needle is clearly for embroidery, if itβs not declared under 7319.90.10.00, you may be hit with 70.4%.
- Accuracy in classification is critical β donβt assume βembroidery toolβ = automatically 67.5%.
π οΈ Four, Customs Clearance Best Practices (Pro-Level Tips)
β 1. Required Documentation (MUST-HAVE)
| Document | Required? | Why It Matters |
|---|---|---|
| β Product Specification Sheet | βοΈ | Shows material (iron/steel), tip shape, size, intended use |
| β Product Photos (Clear, with Label) | βοΈ | Proves needle type, sharpness, and form |
| β Commercial Invoice | βοΈ | Must state: "Embroidery Needle, Iron/Steel, for Hand/Machine Use" |
| β Packing List | βοΈ | Shows quantity, weight, packaging type |
| β Certificate of Origin (CO) | βοΈ | If from China, duty applies; if from Vietnam/Mexico, may qualify for exemption |
| β Third-Party Test Report (if needed) | βοΈ | For compliance with USP, RoHS, or safety standards |
β 2.η³ζ₯ζε·§οΌKey Rules to RememberοΌ
π₯ "Material First, Use Second, Code Last!"
| Scenario | Correct HS Code | Wrong Code | Risk |
|---|---|---|---|
| Needle made of steel, sharp, used for embroidery | 7319.90.10.00 |
7319.90.90.00 |
+2.9% base duty + higher total |
| Needle made of steel, general-purpose, not for embroidery | 7319.90.90.00 |
7319.90.10.00 |
Misclassification β penalty |
| Needle made of plastic or non-metal | β Not eligible | 7319.90.10.00 |
Seizure or rejection |
π Pro Tip:
- Always declare the material first β if it's iron or steel, both codes apply.
- Then match the use: embroidery? β 7319.90.10.00.
- General use? β 7319.90.90.00.
β 3. Special Cases & Solutions
| Situation | Recommended Action |
|---|---|
| Needles from Vietnam, Mexico, Thailand | Apply for IEEPA exemption β may reduce duty to 0% |
| Small shipment (<$800) | β No de minimis relief β still pay 67.5% or 70.4% |
| Needles with packaging (e.g., needle book) | Declare as "embroidery tool set" β still falls under same HS Code |
| Needles for industrial machines | May qualify for different classification β consult a customs broker |
| Needles with branding or OEM | Provide branding documentation to avoid "counterfeit" suspicion |
π Five, Global Market Comparison (2026 Update)
| Country | Recommended HS Code | Duty Rate | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 7319.90.10.00 or 7319.90.90.00 |
67.5% / 70.4% | None required | High risk, high duty |
| π¨π³ China | 7319.90.10.00 |
5% | CCC | Low duty, no extra taxes |
| πͺπΊ EU | 7319.90.10.00 |
0% (if CE) | CE, RoHS | No additional tariffs |
| π¦πΊ Australia | 7319.90.10.00 |
5% | RCM | No extra duties |
| π―π΅ Japan | 7319.90.10.00 |
0% | PSE | No extra tariffs |
π Takeaway:
- The USA is the only market with such highιε duties on steel-based embroidery tools.
- China and EU are much friendlier β consider shifting logistics or origin.
π Six, Common Mistakes & How to Avoid Them (Avoid Costly Penalties!)
β Mistake 1: Declaring embroidery needles as "general sewing tools"
π Result: Higher duty (70.4% vs 67.5%) β extra cost
β Mistake 2: Not specifying material as "iron or steel"
π Result: Customs may reject classification β delay, refund, or penalty
β Mistake 3: Using "embroidery needle" on invoice but not matching the HS Code
π Result: Audit risk β duty reassessment + fines
β Mistake 4: Shipping from China without origin proof
π Result: Automatic application of 67.5% or 70.4% β no appeal
β Correct Declaration Example:
"Embroidery Needle, Steel, 25mm, Sharp Tip, for Hand & Machine Use, 1000 pcs, Origin: China"
π― Seven, Final Verdict: Classify Right, Pay Less, Ship Faster!
π― Remember the Golden Rule:
πΉ "If itβs steel and for embroidery β
7319.90.10.00at 67.5%"
πΉ "If itβs steel but general use β7319.90.90.00at 70.4%"
πΉ "No de minimis, no exemptions, no second chances!"
π Pro Tip:
β Apply for an Advance Ruling (Pre-Approval) from U.S. Customs before shipment.
β Use a licensed customs broker with experience in textile tools and metal goods.
β Consider shifting origin to Vietnam/Mexico if shipping to the U.S. β can avoid 10% Section 122 duty.
π£ Act Now!
π Contact a customs expert + Submit product photos + Request HS Code pre-ruling
π Ensure your embroidery tools clear customs smoothly, without surprise taxes!
β¨ Precision Classification = Profit Protection!
πΌ Your needle may be small β but the duty? Itβs massive.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.