10 pcs long handle eye bolts
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7318130030 | 90.7% | CN | US | Official Doc |
| 7318130060 | 90.7% | CN | US | Official Doc |
Product Images
AI Analysis
ποΈ Long Handle Eye Bolts (10 pcs)
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: Do You Really Know "Long Handle Eye Bolts"?
Long Handle Eye Bolts are specialized threaded fasteners made of iron or steel, featuring a circular eye loop for lifting, securing, or pulling loads, and an extended handle for leverage or ease of installation. In international trade, they are classified under HS Chapter 73 (Articles of Iron or Steel), specifically as threaded articles.
The critical distinction in classification lies in the diameter of the shank or threads: * Less than 6 mm: Classified under 7318.13.00.30 * 6 mm or more: Classified under 7318.13.00.60
β οΈ Key Distinction Point:
- Measure the thread diameter (not the eye diameter) of the bolt. - If the thread diameter is < 6 mm β Use7318.13.00.30- If the thread diameter is β₯ 6 mm β Use7318.13.00.60
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Thread Diameter Condition |
|---|---|---|---|
7318.13.00.30 |
Screw hooks and screw rings | Small fasteners, light-duty lifting | < 6 mm |
7318.13.00.60 |
Screw hooks and screw rings | Heavy-duty lifting, structural bolts | β₯ 6 mm |
π Important Reminder:
- "Long Handle Eye Bolts" fall under Screw Hooks and Screw Rings in this specific tariff schedule. - The classification is strictly based on thread diameter, not the length of the handle or the size of the eye loop. - Ensure accurate measurement of the shank/thread diameter before declaring.
π° III. 2026 Latest Tariff Rate Details (Including Additional Taxes)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Time: Current regulations apply (see details below)
π― 1. 7318.13.00.30 ββ Screw Hooks/Rings (Thread Diameter < 6 mm)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Tariff | 0.0% |
| Steel, Aluminum, Copper Additional Tariff | 50% |
| Total Tariff Rate | 50.0% |
| Tax Calculation | CIF Value Γ 50% |
| De Minimis Exemption Available? | β No (Denied) |
| Legal Basis Path | 7318.13.00.30 β Steel/Aluminum/Copper Surcharge: 50% |
π Explanation:
- Although the base tariff and Section 301 tariff are 0%, these iron/steel threaded articles are subject to a special 50% surcharge for steel, aluminum, and copper products. - Total effective rate: 50%. This is a high tariff that must be factored into cost calculations.
π― 2. 7318.13.00.60 ββ Screw Hooks/Rings (Thread Diameter β₯ 6 mm)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Tariff | 0.0% |
| Steel, Aluminum, Copper Additional Tariff | 50% |
| Total Tariff Rate | 50.0% |
| Tax Calculation | CIF Value Γ 50% |
| De Minimis Exemption Available? | β No (Denied) |
| Legal Basis Path | 7318.13.00.60 β Steel/Aluminum/Copper Surcharge: 50% |
π Note:
- Same tariff rate as the smaller diameter variant. - Whether for heavy-duty industrial lifting or standard construction, all iron/steel screw hooks/rings are subject to this 50% surcharge.
π οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance Guide)
β 1. Required Documentation Checklist (None Missing)
| Document | Must Provide | Notes |
|---|---|---|
| β Product Specifications | βοΈ | Include material (e.g., Carbon Steel), thread size, length, eye diameter |
| β Technical Drawing | βοΈ | Clearly mark thread diameter to avoid classification disputes |
| β Product Photos | βοΈ | Show the bolt from multiple angles, including threads and eye |
| β Commercial Invoice | βοΈ | Explicitly state "Long Handle Eye Bolt, Iron/Steel" |
| β Packing List | βοΈ | Specify quantity (e.g., 10 pcs) and net/gross weight |
| β Certificate of Origin | βοΈ | If not from China, to check for preferential rates |
β 2. Declaration Tips (Key Mantra)
π₯ "Measure Thread, Not Eye! Declare Material, Not Style!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Thread diameter < 6 mm | 7318.13.00.30 |
Misdeclare as 7318.13.00.60 β No penalty but incorrect record |
| Thread diameter β₯ 6 mm | 7318.13.00.60 |
Misdeclare as 7318.13.00.30 β Same risk |
| Material is Stainless Steel | Check Different HS | Misdeclare as Iron/Steel β Classification Error + Penalty |
| Quantity: 10 pcs | Declare exact quantity | Vague description like "some bolts" β Delayed Clearance |
β 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| Mixed Sizes in One Shipment | Declare separately by HS Code if diameters differ. Do not mix 30 and 60 codes in one line item unless aggregated correctly. |
| Stainless Steel Eye Bolts | These do NOT fall under 7318.13. They belong to 7318.15 (Stainless Steel). Tariff rates may differ. Check specific stainless steel provisions. |
| Non-Steel Materials (Brass, etc.) | Exclude from this data. Brass fittings fall under Chapter 74. |
| Small Quantities (10 pcs) | Even small shipments are subject to the 50% surcharge. De minimis rules (Section 321) do not apply to these goods from China due to the surcharge policy. |
π V. Global Major Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification Requirements | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 7318.13.00.30 / .60 |
50% | None specific, but accurate classification critical | High tariff due to steel surcharge |
| π¨π³ China | 7318.13.00 |
0-5% | CCC (if applicable for specific end-use) | Domestic trade lower tax |
| πͺπΊ EU | 7318.15 (Stainless) / 7318.12 (Steel) |
0-6.5% | CE marking for lifting equipment | Check if lifting gear requires CE |
| π¬π§ UK | 7318.15 / 7318.12 |
0-6% | UKCA marking | Post-Brexit rules apply |
| π¦πΊ Australia | 7318.15 / 7318.12 |
5% | None | Standard MFN rate |
π Conclusion:
- The 50% tariff is specific to US imports from China under the current steel/aluminum/copper surcharge policy. - For other markets, tariffs are significantly lower (0-6.5%). - USA imports face a 50% cost increase for these items.
π VI. Common Mistakes & Pitfall Guide (Lessons Learned)
β Mistake 1: Measuring the eye diameter instead of the thread diameter
π Consequence: Wrong HS code subcategory. While both have 50% tax here, accurate data is required for customs records.
β Mistake 2: Claiming "Small Quantity" exemption for 10 pcs
π Consequence: De Minimis (Section 321) does not apply to goods subject to the 50% steel surcharge. You will pay 50% tax.
β Mistake 3: Declaring as "Fasteners" generally without specifying "Screw Hooks/Rings"
π Consequence: Customs may misclassify, leading to delays or audits. Be specific: "Iron/Steel Screw Hook with Long Handle."
β Mistake 4: Assuming all metal bolts are the same tariff
π Consequence: If made of Stainless Steel, the HS Code changes to 7318.15, and the 50% steel surcharge may not apply (check specific stainless steel rules).
β Correct Approach:
"Long Handle Eye Bolt, Carbon Steel, M8 Thread (β₯6mm), 10 pcs, Model XYZ"
π― VII. Conclusion: Precision in Classification Saves Money!
π― Remember the Mantra:
πΉ "Thread Diameter Decides Code, 50% Tax is the Rule!"
πΉ "Less than 6mm go to .30, 6mm+ go to .60!"
π Pro Tip:
If your eye bolts are made of Stainless Steel, check HS Code 7318.15 separately. The 50% steel surcharge may not apply to stainless steel, potentially lowering your tariff significantly.
For Carbon/Iron steel bolts from China, budget for 50% tariff regardless of quantity.
π£ Immediate Action:
π Contact your customs broker + Provide thread diameter specs + Verify material (Carbon vs. Stainless)
π Ensure your 10 pcs are declared accurately to avoid surprise 50% duties!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every Percentage Point Matters in Your Cost Calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.