10cm TORX Screwdriver Set
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8205400000 | 41.2% | CN | US | Official Doc |
| 8205513030 | 38.7% | CN | US | Official Doc |
Product Images
AI Analysis
πͺ Screwdriver Sets (Hand Tools)
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
π I. Product Definition & Classification: Do You Really Understand "Screwdrivers"?
A 10cm TORX Screwdriver Set is a basic hand tool used for tightening or loosening screws with a star-shaped (Torx) recess. In international trade, the classification depends strictly on the intended use (Household vs. Industrial/General) and the material composition.
Under HS Code 8205, these tools fall under:
"Handtools (including glass cutters) not elsewhere specified or included; blow torches... base metal parts thereof"
There are two critical classification paths for this item, depending on whether it is marketed for general industrial use or household/kitchen use:
β οΈ Key Distinction Point:
- If the screwdrivers are marketed for general purpose, industrial, or mechanical repair (even if used by homeowners for furniture assembly) β They are often classified under 8205.40.00.00.
- If the screwdrivers are explicitly marketed as "Kitchen and Table Implements" (e.g., for opening food packages, special kitchen gadgets) or specific Household Tools sub-category β They may fall under 8205.51.30.30.Note: Standard hardware store TORX sets are typically classified as 8205.40, but the "Household" classification can trigger significantly different tax rates due to specific US trade policies.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Tax Rate (China Origin β US) |
|---|---|---|---|
8205.40.00.00 |
Screwdrivers, and parts thereof (General Handtools) | General hardware, mechanical repair, construction, professional toolkits. | 0.0% |
8205.51.30.30 |
Other handtools... Household tools... Of iron or steel... Kitchen and table implements | Specific household/kitchen tools, or goods classified under broader "Other Handtools" household sub-category. | 28.7% |
π Critical Reminder:
-8205.40.00.00is the standard code for Screwdrivers (including TORX, Phillips, Flathead) not elsewhere specified. It carries 0% tariff.
-8205.51.30.30is a broader "Other" category that includes household tools. If misclassified here, you face a 28.7% penalty.
- Do NOT split the set: A "Set" (e.g., 5-piece TORX set) is classified as a single unit under the heading for screwdrivers.
π° III. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes & Policy Add-ons)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Date: Current 2026 Tariff Schedule
π― 1. 8205.40.00.00 ββ Screwdrivers (General Handtools)
| Item | Content |
|---|---|
| Base Tariff Rate | 0.0% |
| Section 301 Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value Γ 0.0% = $0 |
| De Minimis Eligibility | β Yes (If value < $800) |
| Legal Basis Path | HTS:8205.40.00.00 β FOOTNOTE:None for Base β No Section 301 List 4C Entry |
π Explanation:
- Screwdrivers are explicitly listed under 8205.40.
- Unlike many electronics or machinery parts, standard screwdrivers are NOT subject to Section 301 tariffs (the 25% trade war tax) in this specific subheading.
- This makes them a low-risk, low-cost import category for US customs.
π― 2. 8205.51.30.30 ββ Other Handtools / Household Tools
| Item | Content |
|---|---|
| Base Tariff Rate | 3.7% |
| Section 301 Additional Tariff | 25.0% |
| Total Tax Rate | 28.7% |
| Tax Calculation | CIF Value Γ 28.7% |
| De Minimis Eligibility | β No (Section 301 goods are generally exempt from de minimis) |
| Legal Basis Path | HTS:8205.51.30.30 β USITC:8205.51.30.30 β FOOTNOTE:301 List 4C/6C |
π Warning:
- If your TORX set is incorrectly declared as "Other Handtools" under 8205.51, you will pay 28.7% tax.
- This classification is typically reserved for items that do not have a specific "Screwdriver" or "Wrench" designation, or are explicitly "Kitchen Implements."
- Standard TORX screwdrivers are NOT kitchen implements. They are hand tools.
π οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
β 1. Required Documentation Checklist (Must-Have)
| Document | Must Provide | Description |
|---|---|---|
| β Product Spec Sheet | βοΈ | Must state: "TORX Screwdriver Set," Material (Steel/Chrome-Vanadium), Sizes (T10-T30, etc.), Length (10cm). |
| β Commercial Invoice | βοΈ | Clearly state "Screwdrivers, Torx Type, Hand Tools". Avoid vague terms like "Tools" or "Hardware Parts." |
| β Product Photos | βοΈ | Clear images of the screwdrivers showing the Torx head and handles. Show the set packaging. |
| β Material Declaration | βοΈ | Confirm base metal is steel (not high-grade tungsten or specialized alloy requiring different classification). |
| β Country of Origin | βοΈ | Must be "Made in China" (if applicable) for accurate tariff application. |
β 2. Declaration Tips (Key Mantra)
π₯ "Declare 'Screwdrivers', Not 'General Tools'! Use HS 8205.40, Not 8205.51!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| TORX Screwdriver Set | 8205.40.00.00 "Screwdrivers" | Misdeclaring as "Other Handtools" (8205.51) β 28.7% Tax |
| Screwdriver with non-metal handle | Still 8205.40 (Base metal part) | Misdeclaring as "Plastic Parts" β Incorrect Class |
| Industrial Impact Screwdriver | 8205.40 (if hand-operated) | Misdeclaring as "Machine Tool Part" |
| Kitchen-Specific Torx Tool | 8205.51.30.30 | N/A (Rare for standard sets) |
β 3. Special Case Handling
| Case | Handling Advice |
|---|---|
| Set vs. Single | A set of screwdrivers is classified under the primary function (Screwdriver). Do not break it down into "1x T10, 1x T15..." unless they are sold individually. |
| Branded vs. Generic | Brand name does not change HS Code. "Craftsman TORX Set" and "No-Name TORX Set" both go to 8205.40.00.00. |
| Wooden Box Packaging | The wooden box is incidental. The classification follows the screwdrivers (8205.40), not the wood box. |
| Digital Torque Screwdrivers | β οΈ Warning: If it has electronic torque control, it may fall under 8205.90 or even 8508 (Electrical hand tools). This example assumes standard manual TORX screwdrivers. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 8205.40.00.00 |
0.0% | None | Best for export; no Section 301 tax. |
| π¨π³ China | 8205.40.00.00 |
0% | None | Domestic duty-free for export items. |
| πͺπΊ EU | 8205.40 |
0% - 6% | CE (if power tools) | Standard hand tools have low/zero duty. |
| π¬π§ UK | 8205.40 |
0% | UKCA | Post-Brexit alignment with EU/US. |
| π¦πΊ Australia | 8205.40 |
5% | None | Standard FTA rates may apply. |
π Conclusion:
- The US is the most favorable market for standard screwdrivers with 0% duty under8205.40.00.00.
- Avoid the8205.51trap, which triggers the 25% Section 301 penalty.
π VI. Common Errors & Pitfalls (Lessons from Blood & Tears)
β Error 1: Declaring "TORX Screwdrivers" as "Hand Tools - Other" (HS 8205.90 or 8205.51)
π Consequence: You pay 28.7% tax instead of 0%. Loss: ~28.7% of CIF value.
β Error 2: Claiming "De Minimis" exemption for Section 301 goods
π Consequence: If misclassified as 8205.51, the package may be seized or taxed at 28.7%, and De Minimis ($800) exemption is denied.
β Error 3: Vague Description "Tool Set"
π Consequence: Customs may assign a general code with higher duty or request a costly Formal Entry Classification. Always specify "Screwdrivers, TORX Type".
β Error 4: Ignoring Material Composition
π Consequence: If the handle is metal and tool is steel, it's still 8205.40. But if it's a power screwdriver, it's 8207.30 or 8508. Ensure you are declaring manual tools.
β Correct Approach:
"TORX Screwdriver Set, 10cm, Chrome-Vanadium Steel, Manual Hand Tools, HS 8205.40.00.00, Made in China"
π― VII. Conclusion: Precise Classification, Maximum Savings!
π― Remember the Mantra:
πΉ "Screwdrivers are 8205.40, NOT 8205.51!"
πΉ "0% Duty is yours if you declare 'Screwdrivers'!"
πΉ "Don't let 'Other Handtools' cost you 28.7%!"
π Pro Tip:
If you are importing motorized TORX drivers (electric), the HS Code changes to 8207.30 (Interchangeable tools for power tools) or 8508 (Electrical appliances). This guide applies only to manual TORX screwdrivers.
π£ Immediate Action:
π Verify your product is MANUAL (no battery/motor).
π Use Description: "Manual TORX Screwdrivers, Hand Tools."
π Declare HS Code:8205.40.00.00.
π° Enjoy 0% Tariff!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Your Margin Depends on Your HS Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.