20个羊眼螺纹钩
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7318130030 | 90.7% | CN | US | Official Doc |
| 7318130060 | 90.7% | CN | US | Official Doc |
AI Analysis
🪝 羊眼螺纹钩 (Eyebolts / Eye Screws)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: What Exactly is an "Eyebolt"?
An Eyebolt (or Eye Screw) is a specialized fastener consisting of a threaded shank and a looped end (the "eye"). It is primarily used for lifting, hoisting, rigging, or securing loads. In international trade, it is classified under Chapter 73 (Articles of Iron or Steel), specifically within the category of screws, bolts, nuts, and similar articles.
⚠️ Key Classification Logic:
- Material: Typically made of Iron or Steel (unless specified as stainless, brass, or aluminum, but standard "eyebolts" in this context are inferred as ferrous metal).
- Form: The presence of a threaded shank and a looped eye defines it as a "screw-like" fastener.
- HS Code Range: Falls under 7318.13 (Eye-screws and eye-bolts, whether or not with nuts or washers).
📦 II. HS Code Classification Details (2026 Latest Tariff Reference)
Based on the provided data, there are two primary HS Code options for Eyebolts, depending on specific sub-category nuances (e.g., exact material grade or specific sub-heading variations). Both codes carry the same total tax rate due to identical tariff structures.
| HS Code | Product Description | Application Scenario | Material Inference |
|---|---|---|---|
7318.13.00.60 |
Eye-bolts (螺钩) | Lifting hooks, rigging hardware, industrial lifting applications | Iron/Steel (Metal) |
7318.13.00.30 |
Eye-screws (螺纹钩) | Mounting hooks, furniture attachment, light-duty lifting, decorative hardware | Iron/Steel (Metal) |
🔍 Critical Distinction:
- Both7318.13.00.60and7318.13.00.30refer to Threaded Fasteners with an Eye.
- The summary indicates that "Eyebolts" are often mapped to7318.13.00.60(implying a heavier-duty "hook" classification), while "Eye Screws" may map to7318.13.00.30(implying a screw-like thread).
- However, for Customs Clearance Purposes, the Total Tax Rate is identical (90.7%) for both codes. Therefore, the primary goal is accurate description to avoid misclassification penalties, not necessarily tax optimization between these two.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: USA (United States)
✅ Country of Origin: China (CN)
✅ Effective Time: Current as of 2025/2026 tariffs
🎯 1. For HS Codes 7318.13.00.60 & 7318.13.00.30 (Eyebolts/Eye Screws)
| Item | Content |
|---|---|
| Base Tariff | 5.7% (Ad valorem, MFN rate for general steel articles) |
| Section 301 Surcharge | +25.0% (Standard 301 List 4A tariff for many steel products) |
| Section 232 Surcharge (Steel) | +10% (Additional tariff under Section 232 for steel articles) |
| Section 122 Surcharge | +50.0% (Specific "122 Clause" tariff for Steel, Aluminum, and Copper products) |
| Total Tax Rate | 90.7% |
| Tax Calculation | CIF Value × 90.7% |
| De Minimis Exemption | ❌ NOT Available (deny_de_minimis) |
| Legal Basis Path | Section 301: Footnote 9903.88.01 → Section 232: Steel Articles → Section 122: Steel/Aluminum/Copper → USITC: 7318.13.00.30/60 |
📌 Explanation:
- Base 5.7%: Standard Most Favored Nation (MFN) duty for iron/steel fasteners.
- 301 Tariff (25%): Imposed on Chinese goods under Trade Act Section 301.
- 232 Tariff (10%): Imposed on steel articles under Section 232 (National Security).
- 122 Clause (50%): A specific high-rate surcharge applied to Steel, Aluminum, and Copper products from China.
- Total 90.7%: This is an EXTREMELY HIGH tariff rate. Importers must carefully calculate landed costs.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
✅ 1. Required Documentation Checklist (Non-negotiable)
| Document | Mandatory? | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must specify: Diameter, Length, Thread Pitch, Material Grade (e.g., Carbon Steel, Stainless Steel), Load Rating. |
| ✅ Commercial Invoice | ✔️ | Clearly state: "Eyebolts / Eye Screws, Made in China, HS Code 7318.13.00.XX". Avoid vague terms like "Metal Hooks". |
| ✅ Packing List | ✔️ | Show quantity (e.g., 20 units), weight (Net/Gross), and packaging details. |
| ✅ Certificate of Origin (CO) | ✔️ | Essential for proving origin (China) to assess correct surcharges. |
| ✅ Material Test Report | ✔️ | Optional but recommended: Prove material composition (Iron/Steel vs. Other Metals) to justify Chapter 73. |
| ✅ Import License | ✔️ | Check if steel imports require specific licenses due to Section 232. |
✅ 2. Declaration Tips (Key Mnemonic)
🔥 "Precise Description, High Tariff Alert, No De Minimis!"
| Scenario | Correct Declaration | Incorrect Practice |
|---|---|---|
| Standard Eyebolts (Iron/Steel) | 7318.13.00.60 or 7318.13.00.30 |
Misdeclare as "Plastic Hooks" (HS 3926) → Smuggling Risk! |
| Stainless Steel Eyebolts | Same HS Code (Chapter 73) | Misdeclare as "Other Metals" → Wrong Surcharge Application |
| Aluminum Eyebolts | DIFFERENT HS Code (e.g., 7618) | Declare as Steel → Section 122 50% surcharge may still apply, but check Aluminum-specific rules |
| Small Quantity (De Minimis) | ❌ Cannot Use De Minimis | Assume small orders are tax-free → Seizure Risk! |
📌 Note on "20 Pieces":
Even with only 20 units, the Section 301, 232, and 122 tariffs apply. The De Minimis exemption (Section 321) does NOT apply to goods from China under these specific clauses. Full 90.7% tax is due.
✅ 3. Special Handling for Steel Articles
| Situation | Handling Advice |
|---|---|
| Material Ambiguity | If material is Stainless Steel, it still falls under Chapter 73 but may have different base rates. However, Section 232 and 122 surcharges often still apply to stainless steel articles from China. Verify with Customs Broker. |
| Aluminum Eyebolts | If made of Aluminum, the HS Code changes (e.g., 7618.99). Section 122 surcharge still applies (50%), and Section 232 may apply. Total tax remains very high. |
| Brass/Copper Eyebolts | Different HS Code (e.g., 7415). Section 122 surcharge applies (50% for copper). Check base rate. |
🌍 V. Global Market Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Base Tariff | Additional Tariffs (China) | Total Effective Rate | Notes |
|---|---|---|---|---|---|
| 🇺🇸 USA | 7318.13.00.30/60 |
5.7% | +25% (301) +10% (232) +50% (122) | 90.7% | Highest Cost Market |
| 🇨🇳 China (Import) | 7318.13.00 |
5-10% | None (Domestic or FTA) | ~5-10% | Low cost if sourced locally |
| 🇪🇺 EU | 7318.15 (Bolts) |
6-8% | Anti-dumping duties may apply | ~10-15%+ | Check EU Anti-Dumping list for Chinese steel fasteners |
| 🇨🇦 Canada | 7318.15 |
5-8% | MFN rate applies | ~5-8% | Generally favorable |
| 🇦🇺 Australia | 7318.15 |
5% | None | ~5% | No major surcharges |
📌 Conclusion:
- The USA is the ONLY major market with the 90.7% total tariff burden for Chinese-origin steel eyebolts.
- Importing into the EU may face anti-dumping duties if specific Chinese manufacturers are listed, but generally lower than the US.
- Canada, Australia, and Japan offer significantly lower tariff costs.
📌 VI. Common Mistakes & Pitfall Guide (Blood & Tears Lessons)
❌ Mistake 1: Assuming "20 pieces" is a small shipment and exempt from tariffs
👉 Consequence: De Minimis exemption is DENIED for Section 301/232/122 goods. Full 90.7% tax is charged + penalties for misdeclaration.
❌ Mistake 2: Declaring as "Metal Hooks" without specifying "Threaded"
👉 Consequence: Customs may reclassify under a different HS Code (e.g., 8302 for fittings), leading to different tariff rates and delayed clearance.
❌ Mistake 3: Using "Eyebolt" for an "Eye Screw" (or vice versa)
👉 Consequence: While tax rate is the same (90.7%), misdescription can trigger audits. Ensure the description matches the physical product (threaded shank + eye).
❌ Mistake 4: Ignoring the "Section 122" 50% surcharge
👉 Consequence: Profit margin erased. Many importers forget the 122 clause. 90.7% is not a typo.
✅ Correct Declaration Example:
"Eyebolts, Threaded, Made of Carbon Steel, for Lifting Purposes, HS Code 7318.13.00.60, Made in China"
🎯 VII. Conclusion: Professional Declaration, Cost Control, Efficiency!
🎯 Remember the Mnemonic:
🔹 "Iron/Steel Eyebolts: 90.7% Tax in USA!"
🔹 "No De Minimis! No Discounts! No Exceptions!"
🔹 "HS Code 7318.13 is Key, Tariff 90.7% is Reality."
📌 Pro Tip:
- If your eyebolts are NOT made in China (e.g., Vietnam, Thailand, Mexico), the Section 301 (25%) and Section 122 (50%) surcharges may not apply (check specific origin rules).
- Total Tax could drop from 90.7% to ~5-10% if sourced from non-China countries with no anti-dumping duties.
- Always verify Origin before shipping to the USA.
📣 Immediate Action:
📞 Contact a Customs Broker
📄 Provide Product Photos & Specs
🚀 Calculate Landed Cost Including 90.7% Tariff
💼 Consider Non-China Sourcing if US Market is Target
✨ Professional Clearance Starts with Accurate Classification!
💼 Your Every Penny Should Be Precisely Calculated!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.