24 color telescopic clothes hanger
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3926909989 | 22.8% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 9403200090 | 85.0% | CN | US | Official Doc |
| 3926907000 | 22.8% | CN | US | Official Doc |
Product Images
AI Analysis
π 24-Color Telescopic Clothes Hanger
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategy
π I. Product Definition & Classification: What Exactly Is a "24-Color Telescopic Clothes Hanger"?
The "24-Color Telescopic Clothes Hanger" refers to a household storage solution designed for drying and organizing laundry. Its key features are expandable structure (telescopic) and multi-color aesthetic variety. In international trade, classification depends heavily on the primary material and functional form.
β οΈ Critical Distinction:
- If the frame is primarily plastic or composite plastic/metal β Classified under Chapter 39 (Plastics).
- If the frame is primarily metal (iron/steel) β Classified under Chapter 73 (Iron/Steel) or Chapter 94 (Furniture/Fixtures).
- "24 Colors" is a marketing attribute, not a classification criterion. The physical material dictates the HS Code.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, there are four potential HS Codes depending on the specific material composition inferred by customs.
| HS Code | Product Description | Inferred Material | Key Classification Logic |
|---|---|---|---|
3926.90.99.89 |
Other articles of plastics and articles of other materials of heading 3901 to 3914 | Plastic / Metal Composite | "Non-specific articles made of plastics and other materials." Treated as a plastic item because it fits the "other plastic articles" bucket. |
7326.90.86.88 |
Other articles of iron or steel | Iron or Steel | "Other metal articles." Inferred as metal due to the "telescopic" structural requirement often associated with metal alloys for strength. |
9403.20.00.90 |
Other furniture, parts thereof, of metal | Metal (Finished Consumer Good) | "Finished consumer product, conforms to the form and use of rack products." Classified as furniture/rack rather than raw metal part. |
3926.90.70.00 |
Other plastic articles | Plastic (No Metal Conflict) | "Other plastic articles, bottom-up category." Specifically used when no metal conflict exists, focusing purely on plastic utility. |
π Key Takeaway:
- Plastic-based hangers attract lower base tariffs but still face US Section 301 and IEEPA penalties.
- Metal-based hangers face significantly higher tariffs, especially if classified as "iron/steel articles" or "metal furniture."
- Composite items are tricky; customs may lean towards the principal material. If unsure, the plastic classification (3926) is often safer for cost, but misdeclaration can lead to penalties.
π° III. 2026 Latest Tariff Rate Breakdown (Including Add-on Taxes & Policy Surcharges)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Time: Post-2025 (Current Trade War Era)
π― 1. 3926.90.99.89 & 3926.90.70.00 ββ Plastic/Composite Hangers (Lowest Base Rate)
These two codes share the same tax structure in the provided data.
| Item | Content |
|---|---|
| Base Tariff | 5.3% (Ad Valorem) |
| Section 301 Surcharge | +7.5% (List 4B/4C items often fall here, or specific L301 list) |
| Section 122 Surcharge | +10% (Specific trade remedy or emergency tariff) |
| Total Tax Rate | 22.8% |
| Tax Calculation | CIF Value Γ 22.8% |
| De Minimis Eligibility | β Not Eligible (High-risk category for de minimis abuse) |
| Legal Basis Path | USITC:3926.90.99.89 β L301:7.5% β Sec122:10% |
π Explanation:
- Although plastics have a lower base rate (5.3%), the 22.8% total rate is still substantial.
- This is the most cost-effective option among the four if the product is indeed primarily plastic.
- Warning: If customs inspects and finds significant metal components, they may reclassify to7326or9403, leading to back taxes.
π― 2. 7326.90.86.88 ββ Iron/Steel Hangers (Highest Tax Rate)
| Item | Content |
|---|---|
| Base Tariff | 2.9% |
| Section 301 Surcharge | +25.0% |
| Section 122 Surcharge | +10% |
| Steel/Aluminum/Copper Surcharge | +50% (Specific add-on for steel products) |
| Total Tax Rate | 87.9% |
| Tax Calculation | CIF Value Γ 87.9% |
| De Minimis Eligibility | β Not Eligible |
| Legal Basis Path | USITC:7326.90.86.88 β L301:25% β Sec122:10% β Steel Surcharge:50% |
π Explanation:
- This is the most expensive classification.
- The 50% steel surcharge alone dwarfs the base rate.
- Only use this if the hanger is 100% metal and you have no alternative.
- Risk: High probability of customs scrutiny due to the high rate.
π― 3. 9403.20.00.90 ββ Metal Furniture/Rack (High Tax Rate)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surcharge | +25.0% |
| Section 122 Surcharge | +10% |
| Steel/Aluminum/Copper Surcharge | +50% |
| Total Tax Rate | 85.0% |
| Tax Calculation | CIF Value Γ 85.0% |
| De Minimis Eligibility | β Not Eligible |
| Legal Basis Path | USITC:9403.20.00.90 β L301:25% β Sec122:10% β Steel Surcharge:50% |
π Explanation:
- Even with a 0% base tariff, the surcharges push the total to 85%.
- Classified as "furniture" or "rack," which triggers the same steel penalties as raw metal articles.
- Strategy: Avoid this if possible; it offers no tax advantage over7326.
π οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
β 1. Preparation Checklist (Non-Negotiable)
| Document | Mandatory? | Description |
|---|---|---|
| β Product Specs | βοΈ | Must detail: Material composition (%, plastic vs metal), Dimensions, Weight, Telescopic mechanism type. |
| β Product Photos | βοΈ | Clear images showing the joint/connector material (plastic snap vs metal weld). |
| β Commercial Invoice | βοΈ | Description: "Plastic Telescopic Clothes Hanger" (if plastic) or "Metal Rack" (if metal). Do not just write "Hanger." |
| β Origin Certificate | βοΈ | Proves CN origin (triggers tariffs). |
| β Packaging List | βοΈ | Include all 24 colors if sold as a set; clarify if sold individually. |
β 2. Declaration Tactics (Critical Keywords)
π₯ "Material is King! Name it Right, Save Big!"
| Scenario | Recommended HS Code | Declaration Name | Avoid |
|---|---|---|---|
| Plastic Frame | 3926.90.99.89 or 3926.90.70.00 |
"Plastic Telescopic Clothes Hanger" | "Metal Hanger" (causes confusion) |
| Metal Frame | 7326.90.86.88 or 9403.20.00.90 |
"Steel Telescopic Rack" | "Plastic Hanger" (fraud risk) |
| Mixed Material | 3926.90.99.89 (If plastic is principal) |
"Composite Telescopic Hanger" | Ambiguous terms like "Household Item" |
π Note: If the telescopic parts are metal springs/wires inside a plastic body, argue for 3926 (Plastic Article). If the structure is metal, you are stuck with 7326/9403.
β 3. Special Handling for "24 Colors"
- Marketing vs. Reality: "24 Colors" is irrelevant to customs. However, ensure your commercial invoice lists "Assorted Colors" or "Multicolor" rather than listing each color separately, which can trigger manual inspection.
- Bundle Selling: If sold as a set (e.g., 10 packs of 24), declare the set as one unit to simplify valuation.
π V. Global Market Comparison (2026)
| Region | Recommended HS Code | Est. Tariff (China Origin) | Notes |
|---|---|---|---|
| πΊπΈ USA | 3926.90.99.89 |
22.8% | Best option for plastic hangers. |
| πΊπΈ USA | 7326.90.86.88 |
87.9% | Avoid if possible. |
| πͺπΊ EU | 3924.00 (Household Plastic) |
6.5% | No Section 301/122 equivalents. Lower risk. |
| π¨π³ China | 3926.90.90 |
5.3% | Standard import tariff for plastic goods. |
π Conclusion:
- US Market: Plastic classification (3926) is 22.8% vs Metal (7326/9403) at 85%+. Choose Plastic if feasible.
- EU Market: Much friendlier. No punitive surcharges. Focus on CE/RoHS compliance.
π VI. Common Mistakes & Pitfalls (Blood-Stained Lessons)
β Mistake 1: Declaring a Metal Hanger as Plastic (3926) to save tax.
π Consequence: Customs inspection reveals metal springs/wires. Penalty + Back Tax (87.9% - 22.8% = 65% gap) + Legal Fees.
β Mistake 2: Using vague terms like "Laundry Accessories."
π Consequence: Customs assigns a default high-rate code or delays shipment for classification review.
β Mistake 3: Ignoring the Section 122 Tariff.
π Consequence: Even with low base rates, the 10% surcharge is unavoidable for Chinese goods. Factor it into your pricing model.
β Correct Approach:
"24-Color Plastic Telescopic Clothes Hanger, Model: XYZ, Plastic Body, Metal Spring [If applicable], FCC/RoHS Compliant"
π― VII. Conclusion: Professional Declaration, Cost Optimization!
π― Key Mantra:
πΉ "Plastic Structure = 22.8% | Metal Structure = 85%+ | Guessing = Jail/Fines!"
πΉ "Verify Material Before Booking! HS Code Dictates Profit Margin!"
π Pro Tip:
If your product is mostly plastic but has small metal springs, consult a customs broker to argue for 3926.90.99.89 (Plastic Article). Many telescopic hangers use plastic housings with small metal tension rods, which may qualify as "plastic articles" if metal is incidental.
π£ Immediate Action:
π Contact a Customs Broker: Provide photos of the joint/telescopic mechanism.
π Request an Advance Ruling: If shipping large volumes, get official confirmation on3926vs7326.
π‘ Optimize Design: Consider fully plastic telescopic designs (using plastic gears/springs) to stay in the 22.8% bracket.
β¨ Smart Classification is Smart Business!
πΌ Your Margin Depends on Your HS Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.