40盎司保温杯
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 9617004000 | 24.4% | CN | US | Official Doc |
| 9617003000 | 16.9% | CN | US | Official Doc |
| 7310290065 | 85.0% | CN | US | Official Doc |
| 7310210075 | 85.0% | CN | US | Official Doc |
Product Images
AI Analysis
🧊 40oz Vacuum Insulated Bottle (Thermal Bottle)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy for China-US Trade
📌 Part 1: Product Definition & Classification: Is it a "Container" or a "Vacuum Flask"?
A 40oz (approx. 1.18L - 1.2L) thermal bottle is a common portable drinkware item. However, in US Customs (CBP) classification, the distinction between a "Stainless Steel Container" and a "Vacuum Insulated Bottle" is critical because it determines whether you face ~85% tariff or ~17-25% tariff.
Key Distinction: * Vacuum Insulated (The "Good" Category) If the bottle has a double-wall vacuum seal (like Yeti, Hydro Flask, Stanley), it falls under Chapter 96. This is the most common classification for high-end insulated bottles. * Non-Vacuum / Steel Container (The "Bad" Category) If it is a single-wall stainless steel container, or if the vacuum seal is not the primary function, it falls under Chapter 73 (Steel articles). This attracts significantly higher tariffs.
⚠️ Critical Warning:
- If your product is a standard double-wall vacuum bottle, you MUST aim for HS 9617.00.
- If you misclassify a vacuum bottle as a simple "Steel Container" (HS 7310/7323), you may face audits for incorrect declaration.
- However, if the vacuum structure is deemed insufficient or it is a simple steel canister, CBP may reclassify it to Chapter 73, spiking your tax.
📦 Part 2: HS Code Classification Matrix (Based on Provided Data)
Below are the 5 specific HS Codes from your data, analyzed for a 40oz (~1.2L).
| HS Code | Product Summary | Total Tax | Tax Breakdown | Classification Logic |
|---|---|---|---|---|
9617.00.30.00 |
Vacuum container with insulation, 1-2 Liters | 16.9% | Base: 6.9% Add'l: 0.0% 10% Sec 122 |
Best Case. Fits perfectly for standard 40oz vacuum bottles. Lowest tariff. |
9617.00.40.00 |
Non-glass lined vacuum container, ~1.18L | 24.4% | Base: 6.9% Add'l: 7.5% 10% Sec 122 |
Standard Case. Also for vacuum bottles, but likely carries a specific "Steel/Aluminum/Copper" add-on tax under Sec 122. |
7323.99.70.00 |
Metal (Stainless Steel) kitchenware: Insulated Cup | 65.3% | Base: 5.3% Add'l: 0.0% 50% Sec 122 |
High Risk. Classified as "Kitchenware." Note the 50% Sec 122 tax on steel. |
7310.29.00.55 |
Stainless reusable container, ~1.2L | 85.0% | Base: 0.0% Add'l: 25.0% 50% Sec 122 |
Punitive. Classified as generic "Container." Highest tariff due to 25% + 50% add-ons. |
7323.99.90.30 |
Iron/Steel household items, for holding beverages | 88.4% | Base: 3.4% Add'l: 25.0% 50% Sec 122 |
Worst Case. Classified as general "Steel Household Item." Highest total tax. |
🔍 Key Insight:
- Chapter 96 (9617) represents Vacuum Bottles. Total tax ranges from 16.9% to 24.4%.
- Chapter 73 (7310/7323) represents Steel Containers/Kitchenware. Total tax ranges from 65.3% to 88.4%.
- The Difference: ~40% to ~70% extra cost if misclassified!
💰 Part 3: 2026 Tariff Rate Deep Dive
✅ Applicable Country: USA (US)
✅ Origin: China (CN)
✅ Effective Date: Current trade war rates apply (Section 301 + Section 232/122).
🎯 1. 9617.00.30.00 — Vacuum Container, 1-2 Liters (LOWEST TAX)
| Item | Detail |
|---|---|
| Base Rate | 6.9% |
| Section 301 Add'l | 0.0% (Specific exemption or rate for this subheading) |
| Section 122 (10%) | 10% (New steel/aluminum/copper surcharge) |
| Total Effective Rate | 16.9% |
| Calculation | CIF Value × 16.9% |
| De Minimis? | ❌ No (Over $800 threshold, standard duty applies) |
📌 Explanation:
This is the "Golden HS Code" for 40oz bottles. It benefits from a lower Section 301 rate. However, note the 10% Section 122 tax which applies to steel products.
🎯 2. 9617.00.40.00 — Non-Glass Vacuum Container (~1.18L)
| Item | Detail |
|---|---|
| Base Rate | 6.9% |
| Section 301 Add'l | 7.5% |
| Section 122 (10%) | 10% |
| Total Effective Rate | 24.4% |
| Calculation | CIF Value × 24.4% |
📌 Explanation:
Slightly higher than .30 due to the 7.5% Section 301 add-on. Still significantly cheaper than Chapter 73.
🎯 3. 7323.99.70.00 — Stainless Steel Kitchenware (Insulated Cup)
| Item | Detail |
|---|---|
| Base Rate | 5.3% |
| Section 301 Add'l | 0.0% |
| Section 122 (Steel) | 50% |
| Total Effective Rate | 65.3% |
📌 Explanation:
Even though Section 301 is 0%, the 50% Section 122 tariff on steel kitchenware destroys profitability. Do NOT use this code unless your product is explicitly not a "vacuum bottle" but a "steel cup."
🎯 4. 7310.29.00.55 & 5. 7323.99.90.30 — Steel Containers / Household Items
| Item | Detail |
|---|---|
| Base Rate | 0.0% - 3.4% |
| Section 301 Add'l | 25.0% |
| Section 122 (Steel) | 50% |
| Total Effective Rate | 85.0% - 88.4% |
📌 Explanation:
This is the "Death Zone." The combination of 25% Section 301 and 50% Section 122 on generic steel containers makes these codes extremely expensive. CBP often scrutinizes "containers" under 7310 if they look like drinkware.
🛠️ Part 4: Customs Clearance Practical Advice
✅ 1. Preparation Checklist (Critical)
| Document | Required? | Purpose |
|---|---|---|
| Product Photos | ✅ Yes | Must clearly show double-wall construction or vacuum seal structure if possible. Prove it's a "vacuum bottle." |
| Technical Spec Sheet | ✅ Yes | Must state: "Double-wall vacuum insulation," "Capacity: 40oz (1.18L)," "Material: 18/8 Stainless Steel." |
| Commercial Invoice | ✅ Yes | Description must say "Vacuum Insulated Bottle" or "Thermal Flask," NOT "Steel Canister." |
| Material Declaration | ✅ Yes | Confirm steel type. If it contains aluminum/copper components, Section 122 still applies (10% or 50% depending on HS). |
✅ 2. Declaration Strategy (Key Keywords)
🔥 Golden Rule: "Always declare as Vacuum Bottle, Never as Steel Container."
| Scenario | Correct HS Code | Declaration Text | Incorrect Text (RISK!) |
|---|---|---|---|
| Standard 40oz Bottle | 9617.00.30.00 or 9617.00.40.00 |
"Vacuum Insulated Stainless Steel Bottle, 40oz, Double-Wall" | "Stainless Steel Container" or "Steel Cup" |
| Bottle with Lid/Straw | 9617.00.30.00 |
"Vacuum Bottle with Lid" | "Plastic Lid" (Splitting parts is bad) |
| Non-Insulated Steel Can | 7310.29.00.55 |
"Stainless Steel Reusable Container" | "Vacuum Bottle" (Fraud!) |
✅ 3. Special Considerations for Section 122
📌 Note on Section 122 Tax:
The data shows a 10% tax for HS 9617 codes and a 50% tax for HS 73xx codes. This is due to the "10% Steel, Aluminum, Copper Products" surcharge (Section 122/321).
- For 9617: You pay 10% extra.
- For 73xx: You pay 50% extra.
- Action: Ensure your product is truly a "Vacuum Container" to stay in Chapter 96. If CBP determines it's just a "steel cup" without effective vacuum insulation, they will move it to Chapter 73, adding 40% more tax (from 10% to 50%).
✅ 4. Avoiding Audit Traps
| Trap | Solution |
|---|---|
| Misclassification as 7310 | Provide proof of vacuum insulation (e.g., manufacturer certificate, test report showing thermal retention). |
| Under-declaring Value | Include shipping and insurance (CIF) in the declared value. Duty is calculated on CIF. |
| Origin Fraud | Ensure Certificate of Origin matches the product. If assembled in Vietnam but steel from China, still Chinese origin. |
| Brand Name in HS Code | Do not use brand names in HS Code descriptions. Use generic terms. |
🌍 Part 5: Global Market Comparison (Quick Reference)
| Market | HS Code | Est. Duty | Notes |
|---|---|---|---|
| 🇺🇸 USA | 9617.00.30 |
16.9% | Best rate. Watch out for Section 122. |
| 🇨🇳 China | 9617.00.30 |
~8.7% | Lower duty, but focus on US export here. |
| 🇪🇺 EU | 9617.00 |
3.4% | No Section 301/122 equivalents. |
| 🇨🇦 Canada | 9617.00 |
0-5% | CUSMA benefits may apply if non-Chinese origin. |
📌 Part 6: Common Mistakes & Pitfalls (Learn from Others' Errors)
❌ Mistake 1: Calling it "Steel Container" to avoid "Vacuum" scrutiny.
👉 Result: CBP sees "Vacuum" in photos, rejects declaration, applies 85% tax + penalties.
❌ Mistake 2: Using HS 7323.99.90.30 for a vacuum bottle.
👉 Result: You pay 88.4% tax unnecessarily. You could have paid 16.9%. Loss of 71.5% profit.
❌ Mistake 3: Ignoring Section 122.
👉 Result: Even with HS 9617, you must budget for the 10% steel surcharge. If your margin is <15%, this code may be unprofitable from China.
🎯 Part 7: Conclusion & Action Plan
🎯 Final Recommendation:
For a 40oz Insulated Bottle, aim for 9617.00.30.00 (16.9% Tax).
1. Confirm Vacuum Structure: Ensure it is genuinely double-wall vacuum insulated.
2. Use Correct Description: "Vacuum Insulated Stainless Steel Bottle."
3. Prepare Documentation: Have specs ready to prove vacuum functionality to CBP if asked.
4. Budget for 16.9%: Include the 10% Section 122 tax in your cost model.
🔹 Remember:
"A small change in HS Code (9617 vs 7310) means a 70% difference in tax. Choose correctly, or lose everything."
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Optimize your supply chain, protect your margins, and ship with confidence!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.