6 Hair Sectioning Clips 9.5cm
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3926909989 | 22.8% | CN | US | Official Doc |
| 3926908500 | 24.0% | CN | US | Official Doc |
| 9615904000 | 15.3% | CN | US | Official Doc |
| 9615903000 | 15.1% | CN | US | Official Doc |
| 7326200090 | 88.9% | CN | US | Official Doc |
Product Images
AI Analysis
ποΈ Hair Sectioning Clips (9.5cm Plastic/Non-Metal)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategy
π I. Product Definition & Classification: Is it Plastic or Metal?
Hair sectioning clips are essential tools in cosmetology and hairdressing. The critical factor for HS Code classification is the material and the specific type of the clip.
- Plastic/Rubber Clips: Most standard "sectioning clips" with clips mechanism are made of molded plastic (often ABS) or rubber. These fall under Chapter 96.
- Metal/Steel Clips: If the clip is entirely made of iron or steel wire or cast iron, it falls under Chapter 73.
- Electrical Clips: If the clip has a heating element (rare for simple sectioning clips), it might fall under Heading 8516.
β οΈ Key Distinction Point:
- If the clip is 9.5cm, made of plastic/rubber, and used for holding hair β It is likely a "Hairpin" or similar article.
- If the clip is made of iron/steel, it is an "Article of iron or steel wire".
π¦ II. HS Code Classification Details (Based on Provided DATA)
Based on your input "6 Hair Sectioning Clips 9.5cm" and the provided <DATA>, we must determine the material. Since most commercial hair sectioning clips are plastic or rubber, but some are metal, here are the relevant codes from your data.
π °οΈ Scenario A: Plastic/Rubber Hair Clips (Most Common)
If your clips are made of plastic or rubber (typical for salon sectioning clips):
| HS Code | Product Description | Application | Material |
|---|---|---|---|
| 9615.90.30.00 | Hair pins (Other articles of iron or steel: ... Combs, hair-slides... Other: Hair pins) | Standard plastic/rubber sectioning clips | Plastic/Rubber |
| 9615.90.40.00 | Other: Of rubber or plastics, not set with imitation pearls or imitation gemstones | Bulk or simple plastic clips | Plastic/Rubber |
π ιηΉζι (Critical Note):
- 9615.90.30.00 explicitly lists "Hair pins". In customs terminology, "Hair pins" often include simple clips used for sectioning if they fit the generic description.
- 9615.90.40.00 is a "catch-all" for other plastic/rubber hair accessories. Use this if 9615.90.30.00 is rejected by customs.
π ±οΈ Scenario B: Metal/Iron/Steel Clips
If your clips are made of metal (steel or iron):
| HS Code | Product Description | Application | Material |
|---|---|---|---|
| 7326.90.86.88 | Other articles of iron or steel: Other | Metal sectioning clips (non-wire) | Iron/Steel |
| 7326.20.00.90 | Articles of iron or steel wire | Wire-form metal clips | Iron/Steel Wire |
π ιηΉζι:
- If the clip is made from bent wire, use 7326.20.00.90.
- If the clip is cast/molded metal, use 7326.90.86.88.
π° III. 2026 Latest Tariff Rate Analysis (Detailed Breakdown)
β Applicable Country: United States (US)
β Origin: China (CN) (Based on the tax details in DATA)
β Effective Date: Current Tariff Structure
π― 1. For Plastic/Rubber Clips (HS Code: 9615.90.30.00)
| Item | Content |
|---|---|
| Base Tariff | 5.1% |
| Additional Tariff (Section 301/China) | 0.0% |
| Total Tariff | 5.1% |
| Tax Detail | "εΊη‘ε ³η¨: 5.1%, ε εΎε ³η¨: 0.0%" |
| Calculation | CIF Value Γ 5.1% |
| De Minimis Eligibility | β Yes (If value < $800, typically duty-free, but check specific carrier rules) |
π Explanation:
- Plastic hair accessories enjoy lower tariffs and no additional Section 301 tariffs in this specific dataset.
- This is a low-cost, low-risk classification.
π― 2. For Plastic/Rubber Clips (HS Code: 9615.90.40.00)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tariff | 0.0% |
| Tax Detail | "εΊη‘ε ³η¨: 0.0%, ε εΎε ³η¨: 0.0%" |
| Calculation | CIF Value Γ 0% |
| De Minimis Eligibility | β Yes |
π Explanation:
- Duty-Free Entry! This is the most economical classification for plastic/rubber hair clips.
- Use this code if 9615.90.30.00 is not accepted, as it offers zero tariff.
π― 3. For Iron/Steel Clips (HS Code: 7326.90.86.88)
| Item | Content |
|---|---|
| Base Tariff | 2.9% |
| Additional Tariff (Section 301/China) | 25.0% |
| Steel/Aluminum/Copper Surcharge | 50.0% |
| Total Tariff | 77.9% |
| Tax Detail | "εΊη‘ε ³η¨: 2.9%, ε εΎε ³η¨: 25.0%ι’,ιιεΆεε εΎε ³η¨: 50%" |
| Calculation | CIF Value Γ 77.9% |
| De Minimis Eligibility | β No (High tariff goods often excluded from de minimis) |
π Warning:
- EXTREMELY HIGH TAX!
- The combination of Base + Section 301 + Steel Surcharge results in 77.9%.
- Recommendation: Avoid metal clips if possible. If you must use metal, ensure the price margin can absorb this cost.
π― 4. For Iron/Steel Wire Clips (HS Code: 7326.20.00.90)
| Item | Content |
|---|---|
| Base Tariff | 3.9% |
| Additional Tariff (Section 301/China) | 25.0% |
| Steel/Aluminum/Copper Surcharge | 50.0% |
| Total Tariff | 78.9% |
| Tax Detail | "εΊη‘ε ³η¨: 3.9%, ε εΎε ³η¨: 25.0%ι’,ιιεΆεε εΎε ³η¨: 50%" |
| Calculation | CIF Value Γ 78.9% |
π Warning:
- Similar to 7326.90.86.88, this incurs the 50% steel surcharge.
- Total 78.9% makes these clips unprofitable for export to the US unless sold at a very high premium.
π οΈ IV. Customs Clearance Practical Advice
β 1. Material Declaration is Critical
| Scenario | Recommended HS Code | Tariff | Action |
|---|---|---|---|
| Plastic/Rubber Clips | 9615.90.40.00 | 0.0% | Best Choice! Declare clearly as "Plastic Hair Sectioning Clips". |
| Plastic/Rubber Clips | 9615.90.30.00 | 5.1% | Acceptable alternative. |
| Metal/Steel Clips | 7326.90.86.88 | 77.9% | High Cost! Only use if unavoidable. |
| Wire Metal Clips | 7326.20.00.90 | 78.9% | Highest Cost! Avoid. |
π₯ Golden Rule:
"Plastic is free (0%), Metal is expensive (78%)! Choose material wisely!"
β 2. Documentation Requirements
| Document | Required? | Description |
|---|---|---|
| β Commercial Invoice | βοΈ | Must clearly state: "Hair Sectioning Clips, Material: Plastic/Rubber" |
| β Packing List | βοΈ | Quantity: 6 pcs per set/unit (or bulk) |
| β Product Photos | βοΈ | Show the clip to prove it is not a heating device (not 8516) and not a complex mechanical device |
| β Material Certificate | βοΈ | If declared as plastic, have a statement of material |
β 3. Common Mistakes & Pitfalls
β Mistake 1: Declaring plastic clips as "Metal" to match a different HS code
π Consequence: Customs inspection reveals plastic β Fine + Retrospective Tax + Delay.
β Mistake 2: Not specifying material in the description
π Consequence: Customs may assume the higher-tax category (Metal) or request clarification, causing delays.
β Mistake 3: Using HS Code 8516 (Electrical Appliances)
π Consequence: Wrong classification. Sectioning clips are not electrical. Use 9615 instead.
β Correct Declaration Example:
"Hair Sectioning Clips, 9.5cm, Made of ABS Plastic, for Salon Use"
π V. Global Market Comparison (2026)
| Country | Recommended HS Code | Tariff (China Origin) | Remarks |
|---|---|---|---|
| πΊπΈ USA | 9615.90.40.00 | 0.0% | Best Option |
| πͺπΊ EU | 9615.90.00 | Varies (Often 0-5%) | Check EU Tariff Schedule |
| π¨π³ China | 9615.90.90 | Varies (Import) | Domestic trade may differ |
| π¬π§ UK | 9615.90.00 | Varies | Post-Brexit rules apply |
π Conclusion:
- Plastic Hair Clips are duty-free in the US under 9615.90.40.00 according to this data.
- Metal Hair Clips are heavily taxed (77-79%) due to steel/aluminum surcharges.
π VI. Final Recommendation
- Check Material: Are your clips Plastic or Metal?
- If Plastic: Use HS Code 9615.90.40.00 for 0% Tariff.
- Description: "Hair Sectioning Clips, Plastic"
- If Metal: Use HS Code 7326.90.86.88 for 77.9% Tariff.
- Warning: This is very expensive. Consider switching to plastic if possible.
- Declaration: Always specify the material explicitly in the commercial invoice.
π― VII. Quick Reference Summary
| Product Type | HS Code | Total Tax | Recommendation |
|---|---|---|---|
| Plastic/Rubber Clips | 9615.90.40.00 | 0.0% | β BEST |
| Plastic/Rubber Clips | 9615.90.30.00 | 5.1% | β Good |
| Steel/Iron Clips | 7326.90.86.88 | 77.9% | β Avoid |
| Wire Steel Clips | 7326.20.00.90 | 78.9% | β Avoid |
π£ Immediate Action:
π Confirm material with your supplier.
π If plastic, declare as 9615.90.40.00 for 0% duty.
π Maximize profit by avoiding the 78% metal surcharge!
β¨ Smart Classification, Lower Costs, Smoother Customs!
πΌ Your clearance success starts with the right HS Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.