Acrylic Architectural Decoration Film
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3919905060 | 40.8% | CN | US | Official Doc |
| 3919102055 | 40.8% | CN | US | Official Doc |
| 3920511000 | 41.0% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
| 3926400090 | 15.3% | CN | US | Official Doc |
Product Images
AI Analysis
π¨ Acrylic Architectural Decoration Film (Polymer Decorative Membrane)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: What Exactly is "Acrylic Decoration Film"?
Acrylic Architectural Decoration Film, primarily composed of Polymethyl Methacrylate (PMMA) or other plastic polymers, is a flexible sheet or membrane used for surface decoration in construction, interior design, and furniture applications. It is known for its transparency, glossiness, and durability.
In international trade, the classification depends heavily on: 1. Form: Is it a simple roll/film or a processed decorative item? 2. Adhesion: Is it self-adhesive (backed with glue) or non-adhesive? 3. Material Specificity: Is it strictly PMMA or a broader plastic polymer?
β οΈ Key Distinction Point:
- If it is a self-adhesive plastic film (rolls), it falls under Chapter 39, Heading 3919 or 3920.
- If it is a decorative article (cut shapes, frames, etc.), it may fall under Chapter 39, Heading 3926.
- "Acrylic" (PMMA) has a more specific heading (3920) than general "Plastic" (3926).
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the five most relevant HS Codes, ranked by logical fit and cost efficiency.
| HS Code | Product Description | Logic & Justification | Total Tax Rate |
|---|---|---|---|
3926.40.00.90 |
Decorative Articles of Plastic | Lowest Tax Option. Fits "ornamental articles." No material conflict. Best for finished decorative pieces or specific architectural decor. | 15.3% |
3926.90.99.89 |
Other Plastic Articles | Fallback Option. Fits "plastic polymer decorative film" as a general plastic article. Broader category, lower additional tariffs. | 22.8% |
3919.90.50.60 |
Self-Adhesive Plastic Sheets (Other) | Adhesive Logic. Fits "plastic flexible decorative film" as a self-adhesive flat sheet (fallback category). | 40.8% |
3919.10.20.55 |
Self-Adhesive Plastic Sheets (Other) | Adhesive Logic. Fits "plastic flexible decorative film" based on self-adhesive logic (other category). | 40.8% |
3920.51.10.00 |
Non-Adhesive PMMA Sheets/Films | Material Precision. Exact match for Acrylic (PMMA) material and form (film/sheet). Highest precision, but higher tax. | 41.0% |
π Strategic Insight:
- Cost Optimization:3926.40.00.90offers the lowest total tax (15.3%) if the product can be classified as a "decorative article."
- Material Precision:3920.51.10.00is the most accurate for pure PMMA but incurs the highest tax (41.0%).
- Adhesion Factor: Self-adhesive films (3919.xx) are taxed heavily due to USITC Section 301 tariffs.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Time: Post-2025 (Current Trade Policy)
π― 1. 3926.40.00.90 ββ Decorative Articles of Plastic (RECOMMENDED FOR SAVINGS)
| Item | Detail |
|---|---|
| Base Duty | 5.3% |
| USITC Surtax (Section 301) | 0.0% |
| IEEPA Surtax (Section 122/China-specific) | 10.0% |
| Total Tax Rate | 15.3% |
| Tax Calculation | CIF Value Γ 15.3% |
| De Minimis Eligibility | β No (Subject to high tariffs) |
| Legal Path | IEEPA:9903.01.10 β USITC:3926.40.00.90 |
π Explanation:
- Why 0% USITC? This code is often classified under "ornamental articles" which may be exempt from the 25% Section 301 surtax that applies to industrial plastics.
- Why 10% IEEPA? This is the specific tariff for Chinese-origin goods under Executive Orders related to intellectual property or specific trade remedies.
- Result: This is the most cost-effective classification if your product qualifies as a "decorative article."
π― 2. 3926.90.99.89 ββ Other Plastic Articles
| Item | Detail |
|---|---|
| Base Duty | 5.3% |
| USITC Surtax (Section 301) | 7.5% |
| IEEPA Surtax | 10.0% |
| Total Tax Rate | 22.8% |
| Tax Calculation | CIF Value Γ 22.8% |
| De Minimis Eligibility | β No |
| Legal Path | IEEPA:9903.01.10 β USITC:3926.90.99.89 |
π Explanation:
- A broader "catch-all" for plastic products not elsewhere specified.
- Incurs a partial Section 301 surtax (7.5%) compared to 0% for decorative articles.
- Good backup if3926.40is rejected due to product form.
π― 3. 3919.90.50.60 & 3919.10.20.55 ββ Self-Adhesive Plastic Films
| Item | Detail |
|---|---|
| Base Duty | 5.8% |
| USITC Surtax (Section 301) | 25.0% |
| IEEPA Surtax | 10.0% |
| Total Tax Rate | 40.8% |
| Tax Calculation | CIF Value Γ 40.8% |
| De Minimis Eligibility | β No |
| Legal Path | IEEPA:9903.01.25 β USITC:3919.xx |
π Explanation:
- High Cost Warning: These codes are heavily taxed because they are considered "industrial/plastic films" under Section 301.
- Avoid if possible: Unless your product is strictly a raw adhesive roll and cannot be classified as a decorative item, avoid these codes.
π― 4. 3920.51.10.00 ββ PMMA Sheets/Films (MOST PRECISE)
| Item | Detail |
|---|---|
| Base Duty | 6.0% |
| USITC Surtax (Section 301) | 25.0% |
| IEEPA Surtax | 10.0% |
| Total Tax Rate | 41.0% |
| Tax Calculation | CIF Value Γ 41.0% |
| De Minimis Eligibility | β No |
| Legal Path | IEEPA:9903.01.25 β USITC:3920.51.10.00 |
π Explanation:
- Material-Specific: "Acrylic" is PMMA. This code is the exact match for material.
- Highest Tax: Due to the 25% Section 301 surtax on specific plastic sheets.
- Use Case: Only use if customs authorities reject "decorative" classifications and demand material-specific HS codes.
π οΈ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
β 1. Preparation Checklist (Non-Negotiable)
| Document | Required? | Purpose |
|---|---|---|
| β Product Spec Sheet | βοΈ | Must state: Material (PMMA/Acrylic), Thickness, Width, Adhesive Type (if any), Usage (Architectural Decor). |
| β Product Photos | βοΈ | Clear images of the film, roll ends, and any adhesive backing. Show application examples (e.g., on walls/furniture). |
| β Commercial Invoice | βοΈ | Must accurately describe the item: "Acrylic Decorative Film for Wall Cladding" vs. "Plastic Sheet." |
| β Certificate of Origin (CO) | βοΈ | To prove CN origin and apply correct IEEPA tariffs. |
| β Pre-Ruling Application | βοΈ | Critical. Apply for an Advance Ruling to confirm if 3926.40.00.90 is acceptable. |
β 2. Declaration Strategy (Key Formulas)
π₯ "Decorative Status is King: Classify as Decor, Save 25%!"
| Scenario | Correct HS Code | Risk/Consequence |
|---|---|---|
| Finished Decorative Piece (e.g., cut shapes, frames) | 3926.40.00.90 |
β Best: 15.3% tax. Low risk if clearly ornamental. |
| Roll Film for DIY Decorating | 3926.90.99.89 or 3926.40.00.90 |
β οΈ Medium: 22.8% or 15.3%. Argue "decorative purpose" not "industrial plastic." |
| Self-Adhesive Raw Roll | 3919.90.50.60 |
β High Cost: 40.8%. Only if no other option exists. |
| Pure PMMA Sheet (No Adhesive) | 3920.51.10.00 |
β Highest Cost: 41.0%. Use only if forced by customs. |
π Critical Tip:
- Do NOT describe the product merely as "Plastic Film" or "Acrylic Sheet."
- DO describe it as "Architectural Decorative Film" or "Decorative Plastic Article."
- Emphasize the end-use (decoration) over the material (plastic) to qualify for3926.40.
β 3. Special Circumstances Handling
| Situation | Recommendation |
|---|---|
| OEM Custom Designs | Provide design proofs to show it's a "decorative article" (3926.40) rather than a generic film (3920). |
| Adhesive Backing Present | If adhesive is removable or part of the decorative feature, argue for 3926.40 if possible. If it's a raw adhesive roll, you may be stuck with 3919. |
| Sample Submission | Submit a sample with clear labels: "Decorative Film for Interior Design." |
| Customs Dispute | If Customs rejects 3926.40, switch to 3926.90.99.89 (22.8%) as a fallback before accepting 3920 (41%). |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Duty | Notes |
|---|---|---|---|
| πΊπΈ USA | 3926.40.00.90 |
15.3% | Best option due to low USITC surtax on decorative articles. |
| π¨π³ China | 3926.40.00.90 |
~5-10% | Lower import duties; no Section 301 issues. |
| πͺπΊ EU | 3926.90.99.99 |
6.5% | VAT and anti-dumping duties may apply; check EU specific rules. |
| π¬π§ UK | 3926.90.99.90 |
6.5% | Post-Brexit tariffs; similar to EU. |
| π¨π¦ Canada | 3926.90.99.90 |
5% | CUSMA preferential rates may apply if Canadian content. |
π Conclusion:
- The US market is the most complex due to Section 301 and IEEPA tariffs.
- Classifying as "Decorative Article" (3926.40) is the single most effective tax-saving strategy for Chinese-made acrylic films entering the US.
π VI. Common Mistakes & Pitfalls (Lessons Learned)
β Mistake 1: Declaring as "Plastic Sheet" (3920)
π Consequence: 41.0% tax.
π Fix: Change description to "Decorative Film" and use 3926.40.
β Mistake 2: Declaring as "Adhesive Roll" (3919)
π Consequence: 40.8% tax.
π Fix: If the adhesive is part of the decorative product, argue for 3926.40 (Decorative Article).
β Mistake 3: Ignoring "Use" in Description
π Consequence: Customs defaults to material-based codes with higher taxes.
π Fix: Always include "for architectural decoration" or "interior design use" in the invoice.
β Mistake 4: Assuming All Acrylic is PMMA
π Consequence: Misclassification.
π Fix: Verify if the product is PMMA (Acrylic) or PVC/PC (Other Plastic). 3926 covers both, while 3920 is specific to PMMA.
β Correct Approach:
"Architectural Decorative Film, PMMA, Flexible, Self-Adhesive, for Wall and Furniture Decoration, Model XYZ"
π― VII. Conclusion: Professional Declaration, Cost Efficiency, Risk Reduction
π― Remember the Mantra:
πΉ "Decorative > Material, Save 25%."
πΉ3926.40is your golden ticket (15.3%) vs.3920.51(41.0%).
π Pro Tip:
If your supplier is in China, insist on a Pre-Ruling Application with US Customs (CBP) before shipping. The cost of a pre-ruling is minimal compared to the 25%+ savings per shipment.
π£ Immediate Action:
π Contact your freight forwarder + Provide product photos + Apply for HS Code Advance Ruling.
π Ensure smooth customs clearance, minimize tax liability, and maximize profit margins!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Every percent of duty saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.