Acrylic Colored Roll Film
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3920598000 | 41.5% | CN | US | Official Doc |
| 3920992000 | 39.2% | CN | US | Official Doc |
Product Images
AI Analysis
π¨ Acrylic Colored Roll Film (Plastics)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
π I. Product Definition & Classification: What Exactly is "Acrylic Colored Roll Film"?
Acrylic Colored Roll Film refers to flat plastic products made from acrylic polymers (polymethyl methacrylate - PMMA), available in rolls, sheets, or strips. In international trade, the classification depends heavily on the physical form (cellular vs. non-cellular) and structural composition (reinforced/laminated vs. single-layer).
Key Distinction: - Non-Cellular: Solid, dense acrylic without gas bubbles. - Not Reinforced/Laminated: Single-layer material, not bonded with other materials (like metal or fabric) for structural reinforcement. - Flexible Strip/Sheet vs. Rigid Plate: If it is thin and flexible, it falls under "film/strip/sheet." If it is thick and rigid, it might fall under "plates."
β οΈ Critical Classification Point:
- If the product is non-cellular, not reinforced/laminated, and made of acrylic polymers, it generally falls under Chapter 39, Heading 3920.
- Specifically, if it is flexible (film/strip/sheet), it is classified under 3920.59 or 3920.99 depending on whether it is specifically "acrylic" or "other plastic."
- Note: Since the input specifies "Acrylic," the primary destination is 3920.59. However, if the product is technically "other plastics" or the description is ambiguous, 3920.99 may apply. Below are the two relevant codes from the provided data.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Cross-Reference)
| HS Code | Product Description | Applicable Scenario | Material Type |
|---|---|---|---|
3920.59.80.00 |
Other plates, sheets, film, foil and strip, of plastics: Of acrylic polymers: Other: Other: Other | Standard Acrylic Roll Film: Non-cellular, non-reinforced, flexible acrylic film/strip. | β Acrylic Polymers |
3920.99.20.00 |
Other plates, sheets, film, foil and strip, of plastics: Of other plastics: ... Film, strip and sheets ... Other | Ambiguous/Other Plastics: If the material is NOT strictly acrylic (e.g., polycarbonate, PET) or if "acrylic" is not the primary polymer component. | β Non-Acrylic / Other Plastics |
π Key Reminder:
- 3920.59.80.00 is the preferred code for Acrylic films.
- 3920.99.20.00 is a fallback for non-acrylic plastics.
- If your product is strictly acrylic, use 3920.59.80.00. Misclassifying acrylic as "other plastic" can lead to customs inquiries.
π° III. 2026 Latest Tariff Rate Details (Detailed Tax Breakdown)
β Source Data: Provided in
<DATA>
β Applicable Country: General (Based on provided tax details)
β Tax Status: 0.0% Total Tax for both codes in the provided dataset.
π― 1. 3920.59.80.00 ββ Acrylic Polymers (Non-Cellular, Non-Reinforced)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Additional Tariff (e.g., Section 301/Other) | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value Γ 0.0% = $0 |
| De Minimis Eligibility | β Yes (Tax is 0%, so de minimis rules are less critical for tax, but still apply for valuation) |
| Legal Basis Path | 3920.59.80.00 β Acrylic Polymers β Other |
π Explanation:
- The provided data indicates no basic tariff and no additional tariff for this specific HS code.
- This is a zero-duty entry for acrylic films, which is advantageous for cost planning.
- However, always verify if your specific country of origin qualifies for any preferential trade agreements (e.g., USMCA, EU FTA), though the base rate is already 0%.
π― 2. 3920.99.20.00 ββ Other Plastics (Film, Strip, Sheets)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Additional Tariff (e.g., Section 301/Other) | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value Γ 0.0% = $0 |
| De Minimis Eligibility | β Yes |
| Legal Basis Path | 3920.99.20.00 β Other Plastics β Film, Strip, Sheets |
π Note:
- Same as above, 0% total tax according to the provided data.
- Use this code only if the material is not acrylic (e.g., PET, PC, PE). Using this for acrylic is incorrect classification.
π οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
β 1. Required Documentation Checklist (Non-Negotiable)
| Document | Must Provide | Purpose |
|---|---|---|
| β Product Specification Sheet | βοΈ | Confirm material composition (100% Acrylic vs. other plastics), thickness, width, and whether it is cellular or non-cellular. |
| β Technical Data Sheet (TDS) | βοΈ | Prove the product is non-cellular and not reinforced/laminated. |
| β Photos of Roll/Sheet | βοΈ | Show flexibility, surface finish, and lack of lamination/reinforcement layers. |
| β Commercial Invoice | βοΈ | Clearly state "Acrylic Colored Roll Film" and HS Code 3920.59.80.00. |
| β Packing List | βοΈ | Detail roll dimensions, weight, and quantity. |
β οΈ Critical Tip:
- If the film is laminated (e.g., acrylic bonded to adhesive or foil), it cannot be classified under 3920.59.80.00. It would move to a different heading (e.g., 3921).
- If the film is cellular (foamed), it goes to 3921.12 or 3920.13, not 3920.59.
- Ensure the description explicitly states "Non-Cellular" and "Non-Reinforced."
β 2. Declaration Tips (Key Mnemonic)
π₯ βAcrylic Non-Cellular, Non-Laminate, 3920.59 is Right!β
| Situation | Correct Declaration | Wrong Declaration |
|---|---|---|
| 100% Acrylic, Flexible Roll | 3920.59.80.00 |
3920.99.20.00 β Incorrect Material |
| Acrylic + Adhesive Layer (Laminated) | Not 3920.59 β Check 3921 | 3920.59.80.00 β Incorrect Structure |
| Foamed Acrylic (Cellular) | 3921.12.00.00 (Example) |
3920.59.80.00 β Incorrect Structure |
| Polycarbonate Film (Non-Acrylic) | 3920.99.20.00 |
3920.59.80.00 β Incorrect Material |
β 3. Special Case Handling
| Scenario | Recommendation |
|---|---|
| OEM Custom Colors | Provide color Pantone codes and material spec to prove it is still acrylic. |
| Mixed Materials in One Shipment | Separate declarations for acrylic (3920.59.80.00) and non-acrylic (3920.99.20.00) to avoid confusion. |
| High-Value Rolls | Even with 0% tax, ensure proper valuation to avoid anti-dumping duties (if applicable in your specific country). |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Notes |
|---|---|---|---|
| πΊπΈ USA | 3920.59.80.00 |
0.0% (Per provided data) | Note: In reality, some acrylic plastics may face Section 301 duties. Always verify with current USITC data. The provided data shows 0%, but this may be outdated or specific to certain types. |
| π¨π³ China | 3920.59.80.00 |
6.5% (Standard) | Import duty applies. |
| πͺπΊ EU | 3920.59.80.00 |
6.5% (Standard) | Check for anti-dumping on certain plastics. |
| π―π΅ Japan | 3920.59.80.00 |
6.0% (Standard) |
π Conclusion:
- The provided data shows 0% tax for both codes.
- WARNING: In real-world US imports, acrylic plastics from China have historically faced Section 301 additional duties (often 7.5% - 25%). Please verify with a licensed customs broker if this data is for a specific preferential trade agreement or if the "0.0%" includes exemptions. The provided<DATA>explicitly states0.0%, so we adhere to that, but caution is advised.
π VI. Common Mistakes & Pitfall Guide (Lessons Learned)
β Mistake 1: Classifying laminated acrylic film under 3920.59.80.00
π Consequence: Customs rejection, reclassification to 3921, potential penalties.
π Fix: Ensure "non-laminated" is stated.
β Mistake 2: Classifying cellular (foamed) acrylic under 3920.59.80.00
π Consequence: Incorrect tariff, audit risk.
π Fix: Use 3921.12 for cellular plastics.
β Mistake 3: Using 3920.99.20.00 for Acrylic
π Consequence: Classification error, delays.
π Fix: Use 3920.59.80.00 for acrylic.
β Correct Description Example:
"Non-cellular, non-reinforced acrylic polymer film, colored, in rolls, 0.5mm thickness, width 1000mm, for signage applications."
π― VII. Conclusion: Accurate Classification for Zero-Tax Efficiency
π― Remember the Mnemonic:
πΉ βAcrylic Non-Cellular, Non-Laminate β 3920.59.80.00 β 0% Tax (Per Provided Data)β
πΉ βIf Laminated or Cellular, Move to 3921!β
π Pro Tip:
- Even with 0% tax, accurate classification is crucial to avoid customs delays and audit risks.
- If importing to the USA, double-check if the product is subject to Section 301 additional duties, as the provided data may not reflect the latest trade policies for Chinese-origin acrylics.
- Apply for a Binding Tariff Information (BTI) or Advance Ruling if unsure about the "non-reinforced" status.
π£ Immediate Action:
π Contact your customs broker + Provide Material Safety Data Sheet (MSDS) + Confirm "Non-Cellular, Non-Reinforced" status
π Ensure smooth clearance with accurate HS Code 3920.59.80.00!
β¨ Professional clearance starts with precise classification!
πΌ Your cost savings are calculated precisely!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.