Acrylic Polymer Textile Grade
CN โ US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3906902000 | 41.3% | CN | US | Official Doc |
| 3208200000 | 38.6% | CN | US | Official Doc |
| 3208900000 | 38.2% | CN | US | Official Doc |
| 3906905000 | 39.2% | CN | US | Official Doc |
| 3906902000 | 41.3% | CN | US | Official Doc |
Product Images
AI Analysis
๐งต Acrylic Polymer Textile Grade (Acrylic Fibers for Textile Industry)
๐ HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Leveling Strategy
๐ I. Product Definition and Classification: What Exactly is "Acrylic Polymer Textile Grade"?
Acrylic polymers in the textile industry are synthetic fibers primarily made from acrylonitrile. Unlike industrial-grade acrylics used for paints or adhesives, Textile Grade acrylics are specifically engineered for spinning into yarns and fabrics (sweaters, blankets, outdoor upholstery, etc.).
In international trade, the classification depends heavily on the physical form of the polymer at the time of import:
1. Primary Form (Raw Resin/Granules/Powder): - The polymer exists as unspun raw material. - It has not yet been processed into fibers, yarns, or fabrics. - This is considered a "chemical product" or "plastic raw material."
2. Processed Form (Yarn/Fabric): - Note: The provided data focuses on "Primary Form" implications for polymers. If imported as yarn, it falls under Chapter 55 (Chapter 5502/5503). However, based on the HS codes provided in the DATA, we are analyzing the polymer resin classification.
โ ๏ธ Key Distinction:
- If the product is "Acrylic Polymer, Primary Form" (granules/powder) โ Chapter 39 (Plastics).
- If the product is "Acrylic Yarn" โ Chapter 55 (Man-made Fibers).
- The DATA provided indicates classifications within Chapter 32 (Paints/Adhesives) and Chapter 39 (Plastics), suggesting the item is likely imported as raw polymer material or paint-grade acrylic resin used in textile printing/finishing.
๐ฆ II. HS Code Classification Details (Based on Provided DATA)
The provided data suggests two main classification paths: Chapter 39 (Plastics) and Chapter 32 (Paints/Varnishes). This implies the "Textile Grade" description might refer to acrylic emulsions/resins used in textile printing or raw acrylic polymer misinterpreted as textile fiber.
| HS Code | Product Description (From DATA) | Applicable Scenario | Tax Rate |
|---|---|---|---|
| 3906.90.20.00 | Acrylic polymer, printing grade; material match, primary form | Raw acrylic resin for textile printing binders; Primary form (granules/powder) | 41.3% |
| 3208.20.00.00 | Acrylic polymer, printing grade; inferred basic components | Acrylic-based paints/lacquers used in textile coating/printing | 38.6% |
| 3208.90.00.00 | Acrylic polymer, printing grade; synthetic polymer, other | Specialty acrylic coatings/resins for textiles not specified elsewhere | 38.2% |
| 3906.90.50.00 | Acrylic polymer, printing grade; primary form, consistent material | Alternative raw acrylic resin classification for textile-related applications | 39.2% |
๐ Critical Analysis:
- HS 3906: Covers Acrylic Polymers in Primary Forms. If you are importing raw acrylic resin (pellets/powder) to spin into fibers or use in binders, this is the correct chapter.
- HS 3208: Covers Paints/Varnishes. If the "Acrylic Polymer" is already formulated into a liquid paint, emulsion, or adhesive for textile printing, it falls here.
- Why "Printing Grade"? The DATA explicitly mentions "Printing Grade." This strongly suggests the product is not fiber but rather resin used in textile screen printing or coating processes.
๐ฐ III. 2026 Latest Tariff Rate Breakdown (Including Surcharges)
โ Applicable Country: United States (US)
โ Origin: China (CN)
โ Effective Date: Post-2025 Trade Policies (Section 301 & IEEPA)
๐ฏ 1. 3906.90.20.00 โ Acrylic Polymers, Primary Form
| Item | Detail |
|---|---|
| Base Duty Rate | 6.3% |
| Section 301 Surcharge | +25.0% (Additional tariff on Chinese goods) |
| IEEPA Surcharge (122 Clause) | +10.0% (Specific trade restriction tariff) |
| Total Duty Rate | 41.3% |
| Calculation Basis | CIF Value ร 41.3% |
| De Minimis Exemption | โ Not Eligible (High tariffs usually block Section 321 de minimis) |
| Legal Path | USITC:3906.90.20.00 โ Section 301: Footnote 9903.88.01 โ IEEPA:9903.01.25 |
๐ Explanation:
- 6.3% Base: Standard MFN rate for acrylic polymers in primary form.
- 25% Section 301: Applies to most Chinese plastic/polymers imports.
- 10% IEEPA 122: Specific additional duty for certain chemical/plastic categories under recent executive orders.
- Total: 41.3% โ This is a very high duty, impacting profit margins significantly.
๐ฏ 2. 3208.20.00.00 โ Acrylic-Based Paints/Coatings
| Item | Detail |
|---|---|
| Base Duty Rate | 3.6% |
| Section 301 Surcharge | +25.0% |
| IEEPA Surcharge (122 Clause) | +10.0% |
| Total Duty Rate | 38.6% |
| Calculation Basis | CIF Value ร 38.6% |
| De Minimis Exemption | โ Not Eligible |
| Legal Path | USITC:3208.20.00.00 โ Section 301 โ IEEPA |
๐ Explanation:
- Base rate is lower (3.6%) because paints often have lower base duties, but the 25% + 10% surcharges remain the same, leading to a total of 38.6%.
๐ฏ 3. 3208.90.00.00 โ Other Acrylic Coatings
| Item | Detail |
|---|---|
| Base Duty Rate | 3.2% |
| Section 301 Surcharge | +25.0% |
| IEEPA Surcharge (122 Clause) | +10.0% |
| Total Duty Rate | 38.2% |
| Calculation Basis | CIF Value ร 38.2% |
| De Minimis Exemption | โ Not Eligible |
| Legal Path | USITC:3208.90.00.00 โ Section 301 โ IEEPA |
๐ Explanation:
- This is the lowest total duty (38.2%) among the options if the product qualifies as "Other Acrylic Coatings."
- Requires precise technical data sheet justification to prove itโs not a "primary form polymer" (3906) but a formulated coating.
๐ฏ 4. 3906.90.50.00 โ Acrylic Polymers, Primary Form (Other)
| Item | Detail |
|---|---|
| Base Duty Rate | 4.2% |
| Section 301 Surcharge | +25.0% |
| IEEPA Surcharge (122 Clause) | +10.0% |
| Total Duty Rate | 39.2% |
| Calculation Basis | CIF Value ร 39.2% |
| De Minimis Exemption | โ Not Eligible |
| Legal Path | USITC:3906.90.50.00 โ Section 301 โ IEEPA |
๐ Explanation:
- Slightly higher base rate (4.2%) than 3208.90, resulting in a total of 39.2%.
๐ ๏ธ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
โ 1. Documentation Checklist (Essential)
| Document | Required | Purpose |
|---|---|---|
| โ Technical Data Sheet (TDS) | โ๏ธ | Proves "Primary Form" vs. "Formulated Paint." Must show chemical composition. |
| โ Material Safety Data Sheet (MSDS) | โ๏ธ | Required for chemical import; verifies hazardous material status. |
| โ Commercial Invoice | โ๏ธ | Must clearly state: "Acrylic Polymer Resin, Primary Form, Not Spun into Fibers." |
| โ Certificate of Origin | โ๏ธ | Critical for confirming China origin to apply (or challenge) surcharges. |
| โ Labeling | โ๏ธ | Must include HS Code, Net Weight, Chemical Name. |
โ 2. Classification Strategy (Key Tips)
๐ฅ Mnemonic:
"Resin is 39, Paint is 32. Primary form = Plastic. Formulated = Paint. Don't mix them!"
| Scenario | Correct HS Code | Risk if Misclassified |
|---|---|---|
| Raw Acrylic Pellets/Powder | 3906.90.20.00 or 3906.90.50.00 |
If declared as paint (3208), customs may reclassify + penalty. |
| Liquid Acrylic Emulsion (for Printing) | 3208.20.00.00 or 3208.90.00.00 |
If declared as raw resin (3906), may be rejected as "not primary form." |
| Acrylic Yarn/Fiber | Chapter 55 (Not in DATA) | If declared under 39/32, it will be rejected immediately. |
โ ๏ธ Critical Warning:
- "Textile Grade" is not an HS Code term. You must define the physical state.
- If itโs solid granules โ Chapter 39.
- If itโs liquid/emulsion โ Chapter 32.
- If itโs yarn โ Chapter 55 (Requires different HS codes not listed in DATA).
โ 3. Special Case Handling
| Situation | Recommendation |
|---|---|
| Product is Fiber | Do NOT use the provided DATA. Use Chapter 55 HS Codes (e.g., 5502.10). The provided data is for resins/coatings. |
| Product is Blend | If acrylic is blended with other polymers, consult USITC General Rule of Interpretation (GRI) 3(b). |
| Importing Small Quantities | Even if under $800, Section 301 tariffs (25%) often still apply to Chinese goods. Check latest CBP rulings. |
| IEEPA 122 Clause | Verify if your specific chemical CAS number is excluded. Some specialty polymers may have exemptions. |
๐ V. Global Market Comparison (2026)
| Country/Region | Recommended HS Code (Resin) | Duty Rate (China Origin) | Notes |
|---|---|---|---|
| ๐บ๐ธ USA | 3906.90.20.00 |
41.3% | High due to 25% + 10% surcharges. |
| ๐ช๐บ EU | 3906.90.90 |
~5-7% | No Section 301/IEEPA equivalents. |
| ๐ฌ๐ง UK | 3906.90.90 |
~5-7% | Post-Brexit, generally lower than US. |
| ๐จ๐ณ China | 3906.90.20 |
~5-6% | Import duty into China from elsewhere. |
| ๐ฎ๐ณ India | 3906.90.90 |
~7.5% | BCD + SWS, but no US-style surcharges. |
๐ Conclusion:
- USA is the most expensive market for Chinese acrylic polymers due to layered tariffs.
- EU/UK/India are significantly cheaper for imports, but exporting to the US requires careful cost calculation.
๐ VI. Common Mistakes & Pitfalls (Blood Lessons)
โ Mistake 1: Declaring "Acrylic Textile Grade" without specifying form.
๐ Consequence: Customs will detain shipment for classification review โ Delay + Storage Fees.
โ Mistake 2: Assuming "Textile Grade" means Chapter 55 (Yarn).
๐ Consequence: If itโs raw resin, declaring as yarn leads to complete rejection or reclassification to 3906 with penalties.
โ Mistake 3: Ignoring the "122 Clause" IEEPA tariff.
๐ Consequence: Underpaying by 10% โ Audit + Back Taxes + Interest.
โ Mistake 4: Using "Paint" classification for raw pellets.
๐ Consequence: Customs may argue itโs not a "preparation" but a raw material โ Dispute on Base Duty.
โ Correct Practice:
"Acrylic Polymer Resin, Primary Form, CAS No. [XXXX], Not Spun into Fibers, For Textile Printing Binders."
๐ฏ VII. Conclusion: Precise Classification Saves Money
๐ฏ Remember the Golden Rule:
๐น "Form Determines Code: Granules = 39, Liquid = 32. Textile 'Grade' is Just a Label, Not a HS Code."
๐น "US Tariffs are High: 25% + 10% + Base. Plan your margin accordingly."
๐ Pro Tip:
If you are importing acrylic yarn or fabric, do NOT use the provided DATA. You must use Chapter 55 HS Codes (e.g., 5502.10.00 for monofilament, 5509.53 for acrylic yarn). The provided data is strictly for polymer resins/coatings.
๐ฃ Action Required:
๐ Contact a licensed customs broker.
๐ Prepare Technical Data Sheets (TDS) and MSDS.
๐ Verify IEEPA 122 exclusions for your specific CAS number.
โจ Professional Clearance Starts with Accurate Classification!
๐ผ Your Cost Efficiency Depends on These 10 Digits!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) โ Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) โ More specific grouping within the chapter
- Subheading (6 digits) โ Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) โ Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate โ The standard duty rate applied to WTO members
- General rate โ Applied to countries without trade agreements
- Trade remedy duties โ Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.