Acrylic Resin Remover
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3906902000 | 41.3% | CN | US | Official Doc |
| 3920515050 | 41.5% | CN | US | Official Doc |
| 3906100000 | 41.3% | CN | US | Official Doc |
| 3920511000 | 41.0% | CN | US | Official Doc |
Product Images
AI Analysis
π§ͺ Acrylic Resin Remover (Industrial Solvent/Cleaner)
π HS Code Reference & Customs Clearance Guide | 2026 Updated Tax Regulations | Professional Clearance Strategy
π I. Product Definition & Classification: What Exactly is "Acrylic Resin Remover"?
Acrylic Resin Remover is a chemical solvent or cleaning agent designed to dissolve, soften, or remove cured acrylic resins, coatings, or adhesives. In international trade, the classification depends heavily on whether it is classified as a chemical product (primary form) or a prepared mixture/product.
The core material is Acrylic Polymer, and it typically falls under Chapter 39 (Plastics and Articles Thereof) or Chapter 38 (Miscellaneous Chemical Products), depending on its physical state and specific composition.
β οΈ Key Distinction Point:
- If it is a primary form of acrylic polymer (e.g., powder, granules, or liquid polymer before mixing with other solvents to form a "prepared" mixture) β Classified under Chapter 39.
- If it is a prepared mixture specifically formulated for cleaning/dissolving (even if based on acrylic derivatives) β Could potentially fall under Chapter 38, but data provided focuses on Chapter 39 classifications for acrylic polymers.
- Note: The provided data exclusively lists Chapter 39 codes, implying the product is treated as an acrylic polymer product or primary form.
π¦ II. HS Code Classification Details (2026 Latest Customs Tariff Authority Cross-Reference)
Based on the provided data <DATA>, here are the relevant HS Codes for Acrylic Resin-related products:
| HS Code | Product Description | Application Scenario | Classification Logic |
|---|---|---|---|
3906.90.20.00 |
Acrylic Resin, Primary Form, Other | Raw material trading, bulk chemical supply | Primary form acrylic polymer, not specified elsewhere |
3920.51.50.50 |
Acrylic Resin Sheets/Plates, Other | Non-foam, non-reinforced acrylic sheets | Based on "Other/Bottom-up" category for acrylic plastics |
3906.10.00.00 |
Acrylic Resin, Primary Form, Poly(methyl methacrylate) | PMMA resin, raw polymer beads/liquid | Primary form, specifically PMMA type |
3920.51.10.00 |
Acrylic Resin Sheets, Non-foam, Non-reinforced | Solid acrylic plates, clear sheets | Non-foam, non-reinforced acrylic plastic products |
π Important Note:
- Although the user input is "Acrylic Resin Remover," the provided data focuses on Acrylic Resin itself (either raw polymer or sheet form).
- Removers are typically mixtures (solvents + active ingredients) and might usually fall under 3824.99 or 3405.90. However, since the provided data only contains Chapter 39 codes for "Acrylic Resin," we must interpret the input in the context of Acrylic Polymer Products as per the data constraints.
- Do not assume these codes apply to a pure solvent mixture if it is not an acrylic polymer product. The data suggests the product is being classified as acrylic resin (primary form or sheet).
π° III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Date: 2025-11-10 onwards (including subsequent imports)
β Total Tax Rate: ~41.0% β 41.5% (High due to US-China trade tensions)
π― 1. 3906.90.20.00 & 3906.10.00.00 ββ Acrylic Resin (Primary Form)
| Item | Content |
|---|---|
| Base Tariff | 6.3% (ad valorem) |
| Section 301 Surtax | +25.0% (US Trade Act Section 301) |
| 122 Clause Tariff | +10.0% (Specific US provision) |
| Total Tax Rate | 41.3% |
| Tax Calculation | CIF Value Γ 41.3% |
| De Minimis Exemption | β Not Eligible (High tariff rate > $800 threshold impact) |
| Legal Basis Path | USITC:3906.90.20.00 β SECTION301:3906 β 122CLAUSE |
π Explanation:
- Base 6.3%: Standard MFN duty for acrylic polymers.
- Section 301 +25%: Applied to Chinese goods under trade war tariffs.
- 122 Clause +10%: Additional levy under specific US trade regulations.
- Total 41.3%: This is a very high effective tariff, significantly impacting cost competitiveness.
π― 2. 3920.51.50.50 ββ Acrylic Resin (Sheets/Plates, Other)
| Item | Content |
|---|---|
| Base Tariff | 6.5% (ad valorem) |
| Section 301 Surtax | +25.0% |
| 122 Clause Tariff | +10.0% |
| Total Tax Rate | 41.5% |
| Tax Calculation | CIF Value Γ 41.5% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | USITC:3920.51.50.50 β SECTION301:3920 β 122CLAUSE |
π Explanation:
- Slightly higher base rate (6.5% vs 6.3%) for processed sheets vs primary form.
- Same surtax structure applies.
π― 3. 3920.51.10.00 ββ Acrylic Resin (Non-foam, Non-reinforced Sheets)
| Item | Content |
|---|---|
| Base Tariff | 6.0% (ad valorem) |
| Section 301 Surtax | +25.0% |
| 122 Clause Tariff | +10.0% |
| Total Tax Rate | 41.0% |
| Tax Calculation | CIF Value Γ 41.0% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | USITC:3920.51.10.00 β SECTION301:3920 β 122CLAUSE |
π Explanation:
- Lowest total rate (41.0%) among the listed codes due to a lower base rate (6.0%).
- Applicable only to non-foam, non-reinforced acrylic sheets.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance Guide)
β 1. Documentation Checklist (All Must Be Provided)
| Document | Required | Notes |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must clearly state: "Acrylic Polymer," physical form (liquid/powder/sheet), PMMA content, CAS number if applicable. |
| β Safety Data Sheet (SDS) | βοΈ | Critical for chemical products. Must show ingredients, hazards, and classification. |
| β Commercial Invoice | βοΈ | Must match HS Code description exactly. E.g., "Acrylic Resin, Primary Form, PMMA." |
| β Certificate of Origin | βοΈ | To confirm China origin (triggering surtaxes). |
| β Packaging List | βοΈ | Detail gross/net weight, number of packages. |
| β Labeling Samples | βοΈ | Must include English labeling per US CPSC/EPA requirements if applicable. |
β 2. Declaration Tips (Key Mantra)
π₯ "Form Matters! Primary Form vs. Prepared Mixture!"
| Situation | Correct Declaration | Incorrect Approach |
|---|---|---|
| Raw acrylic polymer (beads/liquid) | 3906.10.00.00 or 3906.90.20.00 |
Misdeclare as "Solvent" or "Cleaner" β High Risk of Misclassification Penalty |
| Acrylic Sheets | 3920.51.10.00 or 3920.51.50.50 |
Declare as "Plastic Board" without specifying material |
| Actual Remover (Solvent Mixture) | NOT COVERED IN DATA | Using acrylic resin codes for a solvent mixture β Customs Rejection/Seizure |
π¨ Critical Warning:
If the product is a chemical mixture (e.g., acetone + ethyl acetate + acrylic additives) intended for removing resin, it is NOT an acrylic resin. It should likely be classified under Chapter 38 (3824.99) or Chapter 34 (3405.90).
However, since the provided data<DATA>only lists Chapter 39 codes for "Acrylic Resin," you must ensure your product is actually an acrylic resin (raw material or sheet) to use these codes. Using these codes for a pure solvent remover is a major compliance risk.
β 3. Special Cases Handling
| Situation | Handling Advice |
|---|---|
| Product is a Solvent Mixture | Do NOT use the provided HS Codes. Seek professional classification under Chapter 38. |
| Product is Raw Acrylic Polymer | Use 3906 codes. Ensure documentation proves it is not a "prepared mixture." |
| Product is Acrylic Sheet | Use 3920 codes. Specify thickness, transparency, and whether it is foam/reinforced. |
| Origin is Not China | If from Vietnam, Mexico, etc., apply for IEEPA Exemption (if eligible), reducing surtaxes. |
π V. Global Market Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code (If Acrylic Resin) | Tariff (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3906.10.00.00 / 3920.51.10.00 |
41.0% - 41.5% | EPA, TSCA, SDS | High Surcharge due to Trade War |
| π¨π³ China | 3906.10.00.00 / 3920.51.10.00 |
5% - 6.5% | CCC (if applicable) | Lower base tariff, no US surtax |
| πͺπΊ EU | 3906.10.00 / 3920.51.00 |
6.5% | REACH, CLP | No Section 301 surtax |
| π―π΅ Japan | 3906.10.00 / 3920.51.00 |
5.0% - 6.0% | JIS, PSE | Moderate tariff |
π Conclusion:
- US Market is the Most Expensive due to the 35%+ combined surtax.
- EU and Japan offer more competitive rates if you can source from or ship via these regions (subject to rules of origin).
- Misclassification is Risky: Ensure the product is truly acrylic resin, not a solvent mixture.
π VI. Common Errors & Pitfall Guide (Lessons Learned)
β Error 1: Declaring a solvent-based remover as acrylic resin
π Consequence: Customs audit, penalty for misclassification, potential seizure.
π Fix: Classify correctly under Chapter 38 (e.g., 3824.99) if it is a mixture.
β Error 2: Confusing primary form (3906) with sheet form (3920)
π Consequence: Incorrect tariff assessment (6.3% vs 6.0% base rate), though surtaxes are similar.
π Fix: Clearly define physical state (powder/granule vs. solid sheet).
β Error 3: Ignoring Section 301 & 122 Clause surtaxes
π Consequence: Underestimating landed cost by 35%.
π Fix: Include 41%+ in cost calculations for US imports from China.
β Error 4: Failing to provide SDS for chemical products
π Consequence: Delayed clearance, customs hold.
π Fix: Always include SDS with chemical composition.
β Correct Approach:
"Acrylic Resin, Primary Form, Poly(methyl methacrylate), Polymer Grade, CAS [Number], for Industrial Use"
OR
"Acrylic Sheets, Non-foam, Non-reinforced, PMMA, Clear, [Thickness]mm"
π― VII. Conclusion: Precise Classification, Cost Control, Efficient Clearance!
π― Remember the Mantra:
πΉ "Resin is Polymer, Remover is Mixture!"
πΉ "US Tax is 41%, Don't Get Caught in Misclassification!"
πΉ "SDS is Key, Declaration Must Match Physical Form!"
π Pro Tip:
If your product is indeed a solvent-based remover and not an acrylic resin, do not use the HS codes provided above. Consult a customs broker for classification under Chapter 38 (e.g., 3824.99.92 or 3405.90) or Chapter 34. The provided data is strictly for Acrylic Resin products.
π£ Immediate Action:
π Contact a licensed customs broker
π Provide SDS + Product Photos + Technical Data Sheet
π Apply for Pre-Ruling (Advance Ruling) with US CBP to confirm correct HS Code
π Ensure smooth customs clearance, avoid penalties, and optimize supply chain costs!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Your Cost Efficiency Depends on Precise HS Code Selection!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.