Aerospace Colored Film
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3920620020 | 39.2% | CN | US | Official Doc |
| 3920620050 | 39.2% | CN | US | Official Doc |
| 7607196000 | 13.0% | CN | US | Official Doc |
| 3921110000 | 40.3% | CN | US | Official Doc |
| 7607119090 | 13.0% | CN | US | Official Doc |
AI Analysis
π Aerospace Colored Film: HS Code Classification & US Customs Clearance Guide (2026)
π HS Code Reference & Customs Clearance Strategy | 2026 Latest Tariff Analysis | Professional-Level Compliance
π I. Product Definition & Classification: What Exactly is "Aerospace Colored Film"?
"Aerospace Colored Film" is a specialized material used in aviation maintenance, aircraft interior design, and exterior protection. In international trade, it is generally classified into two main categories based on its material composition:
Polyester/Plastic Film (PET): The most common type, used for protective wrapping, interior decoration, or marking. It falls under plastic products.
Aluminum/Metal Foil: Some high-temperature or structural "films" in aerospace contexts may refer to thin aluminum sheets or composite metal foils, falling under metal products.
β οΈ Critical Distinction Point:
- If the film is made of plastic/polymer (PET, PVC, etc.) β Classify under Chapter 39 (Plastics)
- If the film is made of aluminum/metal β Classify under Chapter 76 (Aluminum)
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Material Type |
|---|---|---|---|
3920.62.00.20 |
Plastic plates, sheets, film, foil and strip, of polyesters, other | Aviation protective film (PET), colored polyester film for interior/exterior use | β Polyester (PET) |
3920.62.00.50 |
Plastic plates, sheets, film, foil and strip, of polyesters, other (specific sub-code for general polyester film) | General-purpose aerospace PET film, colored or clear | β Polyester (PET) |
7607.19.60.00 |
Aluminum foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.2 mm, other | Aerospace aluminum foil, composite metal film, heat-resistant aviation foil | β Aluminum/Metal |
3921.11.00.00 |
Plastic plates, sheets, film, foil and strip, of polymers of ethylene | General plastic film for aerospace (if material is PE/PVC inferred as plastic) | β Plastic (PE/PVC/Other) |
7607.11.90.90 |
Aluminum foil, of a thickness (excluding any backing) not exceeding 0.2 mm, not rolled further than half thickness, other | Aerospace aluminum foil (general fallback for aluminum film), composite metal film | β Aluminum/Metal |
π Key Reminder:
- "Aerospace film" is NOT a standalone HS category. You must determine the base material.
- If it is PET/Plastic, use Chapter 39.
- If it is Aluminum/Metal, use Chapter 76.
- Misclassification leads to significant tariff differences (e.g., 39.2% vs. 13.0%).
π° III. 2026 Latest Tariff Rate Detailed Explanation (Including Surtaxes & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: From November 10, 2025 (including subsequent imports)
π― 1. 3920.62.00.20 & 3920.62.00.50 ββ Polyester Film (Plastic)
| Item | Content |
|---|---|
| Base Tariff Rate | 4.2% (ad valorem) |
| Section 301 Surtax | +25.0% (USITC Footnote) |
| IEEPA Surtax | +10.0% (China/HK products, effective Nov 10, 2025) |
| Total Rate | 39.2% |
| Tax Calculation | CIF Value Γ 39.2% |
| De Minimis Exemption | β Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 β USITC:3920.62.00.20 β FOOTNOTE:301 |
π Explanation:
- 39.2% is a high tariff for plastic films.
- The 25% Section 301 tax applies to most Chinese-origin plastic films.
- The 10% IEEPA tax is the new baseline surcharge for China-origin goods.
- Total: 4.2% + 25.0% + 10.0% = 39.2%.
π― 2. 3921.11.00.00 ββ Other Plastic Film (Inferred Plastic)
| Item | Content |
|---|---|
| Base Tariff Rate | 5.3% (ad valorem) |
| Section 301 Surtax | +25.0% |
| IEEPA Surtax | +10.0% |
| Total Rate | 40.3% |
| Tax Calculation | CIF Value Γ 40.3% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | IEEPA:9901.25 β USITC:3921.11.00.00 |
π Note:
- This code is used if the material is inferred as general plastic (e.g., PE/PVC) but not specifically polyester.
- Slightly higher total rate (40.3%) than polyester films.
- Still subject to high tariffs.
π― 3. 7607.19.60.00 & 7607.11.90.90 ββ Aluminum Film (Metal)
| Item | Content |
|---|---|
| Base Tariff Rate | 3.0% (ad valorem) |
| Section 301 Surtax | 0.0% (Note: Some aluminum foil codes may have 0% or lower surtax depending on specific sub-code interpretation; here assumed 0% per DATA) |
| IEEPA Surtax | +10.0% |
| Total Rate | 13.0% |
| Tax Calculation | CIF Value Γ 13.0% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | IEEPA:9903.01.25 β USITC:7607.19.60.00 |
π Explanation:
- Significantly lower total rate (13.0%) compared to plastic films.
- Base rate is only 3.0%.
- Section 301 surtax is 0% for these specific aluminum foil codes (per DATA).
- IEEPA surtax is still 10%.
- Total: 3.0% + 0.0% + 10.0% = 13.0%.
- Strategic Advantage: If the product can be legally classified as aluminum film, tariffs drop by ~26 percentage points.
π οΈ IV. Customs Clearance Operational Advice (Practical Pitfall Avoidance Guide)
β 1. Preparation Material Checklist (All Required)
| Material | Must Provide | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must clearly state Material Type (PET/Aluminum/PE/etc.), thickness, width, length, color, coating. |
| β Material Certificate (COA) | βοΈ | Third-party lab report confirming base material (e.g., "100% Polyester"). |
| β Product Photos (With Label) | βοΈ | Clear images showing rolls, packaging, and labels indicating material. |
| β Commercial Invoice | βοΈ | Must describe item as "Aerospace Colored Film" AND specify material (e.g., "Polyester Film" or "Aluminum Foil"). |
| β Packing List | βοΈ | Detail dimensions, weight, and quantity. |
| β HS Code Pre-Ruling (Optional but Recommended) | βοΈ | If classification is ambiguous, apply for Advance Ruling to avoid disputes. |
β 2. Declaration Tips (Key Mnemonic)
π₯ "Material First, Chapter Second, Tariff Differs Greatly!"
| Scenario | Correct Declaration | Incorrect Practice |
|---|---|---|
| PET Plastic Film | 3920.62.00.20/50 + "Polyester Film" |
Misdeclared as Aluminum β 13% (Risk of Penalty) |
| Aluminum Foil/Film | 7607.19.60.00/11.90.90 + "Aluminum Foil" |
Misdeclared as Plastic β 39.2% (Overpaid) |
| Composite Material | Determine dominant material | Vague description "Aviation Film" β Delay/Inspection |
| Small Samples (< $800) | May qualify for de minimis if allowed, but check surtax rules | Assume de minimis always applies β False (Surtaxes often exempt de minimis) |
β 3. Special Case Handling
| Case | Handling Advice |
|---|---|
| Composite Film (Plastic + Aluminum Lamination) | Classify based on essential character (usually plastic if PET is main layer). Use Chapter 39. |
| Coated/Printed Film | Still falls under same HS code if material doesnβt change. Specify "Printed/Painted" in description. |
| Custom Width/Length | No impact on HS code. Ensure specs match commercial invoice. |
| Origin Non-China (e.g., Vietnam, USA) | Apply for IEEPA Exemption. Tariff may drop to Base Rate Only (e.g., 4.2% or 3.0%). |
π V. Global Major Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification Required | Notes |
|---|---|---|---|---|
| πΊπΈ United States | 3920.62.00.20 (Plastic) |
39.2% | None (but material proof required) | High surtaxes apply. |
| πΊπΈ United States | 7607.19.60.00 (Aluminum) |
13.0% | None | Lower tariff if aluminum. |
| π¨π³ China | 3920.62.00.20 |
4.2% + VAT 13% | CCC (if applicable) | No 301/IEEPA taxes. |
| πͺπΊ European Union | 3920.62.00.20 |
6.5% (MFN) | CE (if applicable) | No Section 301. |
| π―π΅ Japan | 3920.62.00.20 |
3.5% - 5.5% | PSE (if electrical) | Competitive rates. |
π Conclusion:
- US Market has the highest tariff burden due to 301 and IEEPA taxes.
- Plastic Films (~39.2%) are significantly more expensive to import than Aluminum Films (~13.0%).
- Non-China Origins can save ~10% (IEEPA exemption).
- Accurate Material Declaration is critical to avoid misclassification penalties.
π VI. Common Errors & Pitfall Guide (Lessons Learned)
β Error 1: Declaring "Aerospace Film" without specifying material.
π Consequence: Customs may inspect, delay shipment, or assign higher default rate.
π Solution: Always specify "PET" or "Aluminum" in product description.
β Error 2: Misclassifying Plastic Film as Aluminum Film to reduce tariff.
π Consequence: If lab test shows PET, penalty + back taxes apply.
π Solution: Provide Material Certificate (COA) matching the declared HS Code.
β Error 3: Assuming De Minimis ($800) applies to all shipments.
π Consequence: Surtaxes (25% + 10%) often exclude de minimis exemptions.
π Solution: Check USITC rules for surtax applicability on small shipments.
β Error 4: Using vague terms like "Colored Aviation Material."
π Consequence: High risk of misclassification audit.
π Solution: Use precise terms: "Polyester Colored Film, 0.1mm, for Aerospace Interior."
β Correct Practice:
"Aerospace Colored Polyester Film, 50mm Width, 0.1mm Thickness, Red Color, Roll Form, 100% PET, Model XYZ, for Aircraft Interior Decoration"
π― VII. Conclusion: Professional Declaration Saves Money!
π― Remember the Mnemonic:
πΉ "Material Dictates Chapter: Plastic = Ch.39, Aluminum = Ch.76"
πΉ "Tariff Gap: 39.2% vs. 13.0% β Choose Wisely!"
πΉ "Declare Clearly, Prove with COA, Avoid Audits and Penalties!"
π Tips:
- If your film is non-China origin (e.g., Vietnam, USA), you may exempt the 10% IEEPA tax, saving 10% on total tariff.
- For plastic films, the 25% Section 301 tax is unavoidable for China origin.
- Apply for Advance Ruling if unsure about composite materials.
π£ Immediate Action:
π Contact a licensed customs broker + Provide Product Specs + Submit Material Certificate
π Ensure Smooth Clearance, Cost Control, and Compliance in the US Market!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Every Percent Matters in International Trade!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.