Agricultural Grade Reinforced Rubber Tubing
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4009310000 | 37.5% | CN | US | Official Doc |
| 3917390010 | 38.1% | CN | US | Official Doc |
Product Images
AI Analysis
π Agricultural Grade Reinforced Rubber Tubing
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Clearance Strategy
π I. Product Definition & Classification: Do You Really Understand "Agricultural Tubing"?
Agricultural Grade Reinforced Rubber Tubing refers to flexible conduits used in irrigation, pesticide spraying, fluid transfer, and farm machinery. In international trade, classification hinges on two critical factors:
1. Material: Vulcanized rubber (non-hard rubber).
2. Reinforcement: Specifically combined with textile materials (e.g., nylon, polyester, or cotton braids) to withstand pressure.
β οΈ Key Distinction:
- If reinforced with metal β It falls under Plastics (HS 3917) or Metal Tubes, NOT this category.
- If reinforced with textiles (or combined ONLY with textiles) β It falls under Rubber Tubes (HS 4009).
- Crucial Detail: Does it come with fittings (joints, elbows, flanges)? This determines the specific sub-code within HS 4009.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based strictly on the provided data, there are two potential classifications depending on the reinforcement material and construction. However, since the product is "Rubber Tubing," the primary candidate is HS 4009. The second entry (HS 3917) serves as a critical contrast/warning for misclassification.
| HS Code | Product Description | Applicable Scenario | Reinforcement Type | Fittings Status |
|---|---|---|---|---|
4009.32.00.50 |
Tubes, pipes and hoses, of vulcanized rubber other than hard rubber... Reinforced or otherwise combined only with textile materials: With fittings | Agricultural irrigation hoses with attached connectors; Pre-assembled sprinkler lines | β Textile (e.g., polyester/nylon braid) | β Yes (Joints, elbows, flanges included) |
3917.39.00.10 |
Tubes, pipes and hoses and fittings therefor... of plastics: Reinforced with metal | MISCLASSIFICATION WARNING: If the tube is actually plastic (PVC/PE) and reinforced with metal wire, it falls here, NOT in rubber. | β Plastic (Not Rubber) | β Yes (Fittings included) |
π Critical Note for Agricultural Users:
- Most "Agricultural Rubber Tubing" is made of vulcanized rubber reinforced with textile braiding for flexibility and pressure resistance.
- If your product is Rubber + Textile + Fittings β Use4009.32.00.50.
- If your product is Rubber + Textile + NO Fittings β The data indicates HS4009.31.00.00applies (see below), but the detailed tax data is provided for the Fittings version.
- DO NOT classify rubber tubing as Plastic (HS 3917) unless it is actually plastic. Misclassification leads to severe penalties.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: 2025 onwards (Based on provided data structure)
π― 1. 4009.32.00.50 ββ Rubber Tubing (Textile Reinforced, With Fittings)
This is the primary code for your "Agricultural Grade Reinforced Rubber Tubing" if it is made of rubber, reinforced with fabric, and includes connectors.
| Item | Content |
|---|---|
| Base Tariff | 2.5% (Ad Valorem) |
| Surtax (Section 301) | +25.0% (Additional duty on Chinese goods) |
| Total Tariff | 27.5% |
| Tax Calculation | CIF Value Γ 27.5% |
| De Minimis Eligibility | β Not Eligible (High-value industrial goods usually excluded) |
| Legal Path | HTSUS:4009.32.00.50 β USITC:301 Section |
π Explanation:
- The 2.5% is the standard Most Favored Nation (MFN) rate for rubber tubing.
- The 25% is the significant Section 301 surcharge applied to specific Chinese imports.
- Total Cost Impact: For every $10,000 of goods, you pay $2,750 in duties. This is a high-cost item compared to non-reinforced rubber.
π― 2. 3917.39.00.10 ββ Plastic Tubes (Reinforced with Metal, With Fittings)
β οΈ WARNING: This code is ONLY for Plastic, not Rubber.
If your "Agricultural Tubing" is actually PVC/PE with metal wire reinforcement, it falls here. Do not use this for Rubber.
| Item | Content |
|---|---|
| Base Tariff | 3.1% (Ad Valorem) |
| Surtax (Section 301) | +25.0% (Additional duty on Chinese goods) |
| Total Tariff | 28.1% |
| Tax Calculation | CIF Value Γ 28.1% |
| De Minimis Eligibility | β Not Eligible |
| Legal Path | HTSUS:3917.39.00.10 β USITC:301 Section |
π Explanation:
- Although the tariff (28.1%) is slightly higher than the rubber code (27.5%), the material mismatch makes this a compliance risk.
- Customs may inspect to verify if the material is truly plastic or rubber. If it is rubber, this classification is wrong.
π― 3. 4009.31.00.00 ββ Rubber Tubing (Textile Reinforced, Without Fittings)
The data mentions this code but does not provide specific tax details in the JSON. However, logically, if you buy the tubing without fittings (just the hose), it may fall here.
- General Rule: Rubber tubes without fittings often have lower or equal surtax rates.
- Strategy: If you can source tubing without fittings and assemble them domestically, you might avoid some complexity, but the base tax remains similar. Check the specific 2026 update for 4009.31.00.00 tax rate, as the provided data focuses on the with fittings scenario.
π οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
β 1. Preparation Checklist (Non-Negotiable)
| Document | Mandatory? | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must clearly state: "Vulcanized Rubber," "Textile Reinforcement," "Max Pressure," "Temperature Range." |
| β Material Composition Report | βοΈ | Critical: Confirm it is Rubber, not Plastic/PVC. If itβs plastic, use HS 3917. If itβs rubber, use HS 4009. |
| β Reinforcement Detail | βοΈ | Specify "Textile Braid" (e.g., Polyester, Nylon). Do NOT say "Metal Wire" if itβs textile. |
| β Fittings Declaration | βοΈ | Explicitly state if the shipment includes "Joints, Elbows, Flanges." If yes, code ends in .50. If no, code may end in .00. |
| β Commercial Invoice | βοΈ | Description: "Agricultural Rubber Hose, Textile Reinforced, With Brass Fittings, Model AG-100." |
| β Country of Origin Certificate | βοΈ | Required to determine if Section 301 taxes apply. |
β 2. Declaration Tips (Key Mantras)
π₯ "Rubber vs. Plastic, Textile vs. Metal, Fittings or No, Declare Clearly!"
| Scenario | Correct HS Code | Common Mistake | Consequence |
|---|---|---|---|
| Rubber Hose + Textile Braid + Fittings | 4009.32.00.50 |
Classifying as Plastic (3917) |
Rejection + Penalty |
| Rubber Hose + Textile Braid + NO Fittings | 4009.31.00.00 (Verify Tax) |
Classifying as 4009.32.00.50 |
Over-taxation (if tax differs) |
| Plastic Tube + Metal Wire + Fittings | 3917.39.00.10 |
Classifying as Rubber (4009) |
Misclassification Penalty |
| Hard Rubber (Ebonite) | Exclude | Classifying as Vulcanized Rubber | Hard rubber is excluded from HS 4009 |
β 3. Special Situations
| Situation | Handling Advice |
|---|---|
| OEM Agricultural Hoses | Provide the buyerβs design spec. If fittings are pre-attached, declare as "With Fittings." |
| Mixed Shipment | If some hoses have fittings and others donβt, split the declaration. Do not lump them under one code if tax rates differ significantly. |
| Reinforcement Ambiguity | If the tube has "fiberglass" inside, is it textile? Usually, fiberglass is treated as non-textile reinforcement. This might move it to a different subheading. Clarify with supplier. |
| High-Pressure Sprinkler Hoses | These are typically textile-reinforced rubber. Ensure the invoice specifies "Textile Reinforced" to justify 4009.32. |
π V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate (China Origin) | Certification Required | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 4009.32.00.50 |
27.5% (2.5% Base + 25% Surtax) | None Specific | High Tariff. Plan margin accordingly. |
| π¨π³ China | 4009.32.00.50 |
Varies (Import Duty) | CCC (if applicable) | Domestic production may be cheaper. |
| πͺπΊ EU | 4009.31 or 4009.32 |
0% β 3% | CE (for machinery parts) | No Section 301-style surtax. |
| π¦πΊ Australia | 4009.32.00.50 |
5% | RCM | Lower tariff than US. |
| π―π΅ Japan | 4009.32.00.50 |
3.2% | PSE (if for electrical agri-equip) | Moderate tariff. |
π Conclusion:
- The US market is the most expensive due to the 25% Section 301 surcharge.
- EU/Australia/Japan offer significantly lower barriers for rubber tubing.
- Strategy: If exporting to the US, ensure the textile reinforcement is clearly documented to avoid misclassification penalties that could double your costs.
π VI. Common Errors & Pitfall Guide (Lessons from the Field)
β Error 1: Calling "Plastic Pipe" (PVC) "Rubber Hose"
π Consequence: Customs inspects, finds plastic β Re-codes to 3917.39.00.10 β 28.1% tax + Penalty.
β
Fix: Be honest. If itβs PVC, use HS 3917. If itβs rubber, use HS 4009.
β Error 2: Ignoring Fittings in Description
π Consequence: Declaring "Rubber Hose" without mentioning fittings, but shipping with elbows β Customs may suspect under-declaration or misclassification.
β
Fix: Explicitly state "With Brass Fittings" in the commercial invoice.
β Error 3: Confusing "Textile" with "Metal" Reinforcement
π Consequence: Textile-reinforced rubber (4009) vs. Metal-reinforced plastic (3917).
β
Fix: Provide a cross-section photo showing the internal braid (textile) vs. wire (metal).
β Error 4: Not Separating Rubber from Hard Rubber
π Consequence: Hard rubber (ebonite) is not covered under HS 4009.
β
Fix: Confirm the rubber is vulcanized non-hard rubber.
π― VII. Conclusion: Professional Declaration, Save Costs, Avoid Delays!
π― Remember the Mantra:
πΉ "Rubber + Textile + Fittings = 4009.32.00.50 (27.5%)"
πΉ "Plastic + Metal + Fittings = 3917.39.00.10 (28.1%)"
πΉ "No Fittings = Different Subcode (Check Tax)"
π Pro Tip:
If your agricultural tubing is originating from Vietnam, Malaysia, or Thailand, you may be eligible for zero or lower surtax rates due to free trade agreements (e.g., ASEAN-US relations).
β
Recommendation: If shipping to the US, consider supply chain diversification to avoid the 27.5% total duty.
π£ Immediate Action:
π Contact your customs broker + Provide Cross-Section Photos + Confirm Fittings Status
π Ensure smooth customs clearance, minimize tax burden, and maximize profit margins!
β¨ Professional clearance starts with accurate classification!
πΌ Every dollar of duty saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.