Agricultural other plastic rods
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3925900000 | 40.3% | CN | US | Official Doc |
| 3917290090 | 38.1% | CN | US | Official Doc |
| 3917290050 | 38.1% | CN | US | Official Doc |
| 3916905000 | 40.8% | CN | US | Official Doc |
| 3916200091 | 40.8% | CN | US | Official Doc |
AI Analysis
π Agricultural Other Plastic Rods (Agri-Plastic Rods)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Clearance Strategy
π I. Product Definition & Classification: Do You Really Understand "Agricultural Other Plastic Rods"?
Agricultural Other Plastic Rods are specialized synthetic components used in farming, greenhouse construction, irrigation systems, and horticultural support structures. In international trade, they are typically classified based on their material composition (plastic type), form (rod/bar shape), and intended use (agricultural construction or support).
The classification hinges on whether the rod is considered a structural building component (under Chapter 39, Heading 39.25) or a tubular/piping component (under Chapter 39, Heading 39.17 or 39.16).
β οΈ Key Distinction Point:
- If the rod is primarily used for construction purposes (e.g., greenhouse frames, support beams) β Look towards 3925.90.00.00.
- If the rod is used as part of a piping/tubing system (e.g., irrigation lines, drip tape supports) β Look towards 3917.29 or 3916.20.
- If the rod is a generic plastic bar without specific piping or building integration β Look towards 3916.90 or 3916.20 as catch-all categories.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Material/Form Match |
|---|---|---|---|
3925.90.00.00 |
Other plastic articles for builders (e.g., rods for greenhouse frames) | Greenhouse construction, structural supports | β Yes (Building component) |
3917.29.00.90 |
Other plastic tubes, pipes, and hoses (including fittings) | Irrigation systems, tubing accessories | β Yes (Tube/Pipe extension) |
3917.29.00.50 |
Other plastic tubes, pipes, and hoses | Agricultural piping, drip irrigation supports | β Yes (Tube/Pipe characteristic) |
3916.90.50.00 |
Other profiles and shapes for builders (Plastic rods) | General plastic rods, structural shapes | β Yes (Catch-all/Shape-based) |
3916.20.00.91 |
Other plastic rods and profiles (Polyethylene/Polypropylene) | Generic plastic rods for agri-use | β Yes (Generic rod profile) |
π Key Reminder:
- All structural rods used in farm buildings or greenhouses are strongly linked to 3925.90.00.00.
- If the "rod" is hollow or part of a fluid transport system, it falls under 3917.
- If it is a solid or hollow solid bar used as a generic profile, 3916 is the appropriate catch-all.
π° III. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: From November 10, 2025 (including subsequent imports)
π― 1. 3925.90.00.00 ββ Other Plastic Articles for Builders
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| Section 301 Additional Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Rate | 40.3% |
| Tax Calculation | CIF Value Γ 40.3% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | Base: 5.3% β Section 301: 25.0% β Section 122: 10.0% |
π Explanation:
- This code is for plastic articles used in construction (e.g., greenhouse frames).
- The total tariff is 40.3%, which is high due to theε ε (stacking) of base tariffs, Section 301, and Section 122.
π― 2. 3917.29.00.90 ββ Other Plastic Tubes, Pipes, and Hoses
| Item | Content |
|---|---|
| Base Tariff | 3.1% |
| Section 301 Additional Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Rate | 38.1% |
| Tax Calculation | CIF Value Γ 38.1% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | Base: 3.1% β Section 301: 25.0% β Section 122: 10.0% |
π Explanation:
- If the rod is classified as a tube or pipe (e.g., hollow, used for water/air transport), it falls here.
- Total tariff is 38.1%, slightly lower than building articles due to a lower base rate (3.1% vs 5.3%).
π― 3. 3917.29.00.50 ββ Other Plastic Tubes, Pipes, and Hoses
| Item | Content |
|---|---|
| Base Tariff | 3.1% |
| Section 301 Additional Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Rate | 38.1% |
| Tax Calculation | CIF Value Γ 38.1% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | Base: 3.1% β Section 301: 25.0% β Section 122: 10.0% |
π Note:
- Similar to the previous code, but may refer to specific sub-categories within "other tubes."
- Total tariff remains 38.1%.
π― 4. 3916.90.50.00 ββ Other Plastic Profiles and Shapes
| Item | Content |
|---|---|
| Base Tariff | 5.8% |
| Section 301 Additional Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Rate | 40.8% |
| Tax Calculation | CIF Value Γ 40.8% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | Base: 5.8% β Section 301: 25.0% β Section 122: 10.0% |
π Explanation:
- This is a catch-all for plastic rods/profiles not specifically categorized as tubes or building articles.
- Total tariff is 40.8%, the highest among the options due to a higher base rate (5.8%).
π― 5. 3916.20.00.91 ββ Other Plastic Rods and Profiles
| Item | Content |
|---|---|
| Base Tariff | 5.8% |
| Section 301 Additional Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Rate | 40.8% |
| Tax Calculation | CIF Value Γ 40.8% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | Base: 5.8% β Section 301: 25.0% β Section 122: 10.0% |
π Note:
- Specifically for plastic rods (solid or hollow) that are not pipes/tubes.
- Total tariff is 40.8%.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
β 1. Document Checklist (All Required)
| Document | Required | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Material type (PE, PVC, etc.), diameter, length, solid/hollow status |
| β Product Photos (Including Label) | βοΈ | Clear view of shape, ends, and any markings |
| β Commercial Invoice | βοΈ | Must specify "Plastic Rods for Agricultural Use" |
| β Packing List | βοΈ | Weight, dimensions, packaging method |
| β Certificate of Origin (CO) | βοΈ | If applicable for preference claims |
| β Third-Party Test Report | βοΈ | Material safety, UV resistance (if for outdoor agri-use) |
β 2. Declaration Tips (Key Mnemonics)
π₯ "Shape Defines Code, Use Defines Category, Hollow is Pipe, Solid is Rod!"
| Scenario | Correct Declaration | Incorrect Practice |
|---|---|---|
| Greenhouse Frame Rod (Solid/Structural) | 3925.90.00.00 |
Misdeclare as 3917 (Tube) β Risk of reclassification |
| Irrigation Tube (Hollow, Fluid Transport) | 3917.29.00.90 / 3917.29.00.50 |
Misdeclare as 3916 (Rod) β Rate 40.8% vs 38.1% |
| Generic Plastic Rod (No Specific Use) | 3916.90.50.00 / 3916.20.00.91 |
Vague description "Plastic Bar" β Delay |
| Agricultural Support Stick | 3925.90.00.00 or 3916.20.00.91 |
Depends on structural vs. generic use |
β 3. Special Cases Handling
| Situation | Handling Advice |
|---|---|
| Hollow Rods | If hollow and used for fluid/air, declare as Tube/Pipe (3917). |
| Solid Rods | If solid and used for structure, declare as Building Article (3925) or Profile (3916). |
| Mixed Shipments | Clearly separate HS Codes in the invoice to avoid confusion. |
| UV-Resistant Rods | Mention "UV-Resistant" in description to justify agricultural use, but do not change HS code. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3925.90.00.00 / 3917.29 |
38.1% - 40.8% | None specific | High tariffs due to Section 301 & 122 |
| π¨π³ China | 3925.90.00.00 / 3917.29 |
~5-10% | CCC (if applicable) | Lower base tariffs |
| πͺπΊ EU | 3925.90.00 / 3917.29 |
~6.5% | CE (if applicable) | No Section 301/122 |
| π¦πΊ Australia | 3925.90.00 / 3917.29 |
~5% | RCM (if applicable) | Standard rates |
| π―π΅ Japan | 3925.90.00 / 3917.29 |
~5-6% | PSE (if applicable) | Standard rates |
π Conclusion:
- USA is the most expensive market due to additional tariffs (Section 301 & 122).
- EU, Australia, Japan offer significantly lower tariff burdens.
- For US imports, tariff engineering (choosing between 3917 and 3916/3925) can save 0.5-2.7% per unit, which is significant for large volumes.
π VI. Common Mistakes & Pitfalls (Blood & Tears Lessons)
β Mistake 1: Declaring hollow irrigation tubes as "Plastic Rods" (3916)
π Consequence: Higher tariff (40.8%) vs (38.1%) + potential penalty for misclassification.
β Mistake 2: Declaring structural greenhouse rods as "Plastic Pipes" (3917)
π Consequence: Customs rejection or reclassification to 3925 with back-taxes.
β Mistake 3: Vague description "Plastic Bar"
π Consequence: Customs delay for further inquiry. Use precise terms: "Hollow PVC Rod for Irrigation" or "Solid PP Rod for Greenhouse Frame".
β Correct Practice:
"Solid Polypropylene Plastic Rods, 1-inch diameter, for agricultural greenhouse structural support, UV-resistant, Model ABC"
π― VII. Conclusion: Professional Declaration Saves Money!
π― Remember the Mnemonic:
πΉ "Hollow is Pipe (3917), Solid is Rod (3916/3925), Greenhouse is Building (3925)!"
πΉ "Choose 3917 for 38.1%, Choose 3925/3916 for 40.3-40.8%. Savings matter!"
π Pro Tip:
- If your rods are hollow and used for fluid transport, always prefer 3917.29 to save 2.7% tariff.
- If your rods are solid and used for structure, use 3925.90 to align with building codes.
- Always provide clear photos and specifications to avoid customs delays.
π£ Act Now:
π Consult a licensed customs broker + Provide product specs + Apply for Advance Ruling if uncertain.
π Ensure smooth clearance, cost efficiency, and compliance for your agricultural plastic rods!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Every Percent of Tariff Saved is Profit Gained!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.