Anti corrosion Woven Sheet
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 5911900040 | 38.8% | CN | US | Official Doc |
| 3926905900 | 37.4% | CN | US | Official Doc |
| 3926905700 | 41.5% | CN | US | Official Doc |
| 5911900080 | 38.8% | CN | US | Official Doc |
| 5903102010 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
π‘οΈ Anti-Corrosion Woven Sheet: The Ultimate Clearance Guide for 2026
π HS Code Reference & Customs Clearance Strategy | 2026 Latest Tariff Analysis | Professional-Level Entry Protocols
π Part 1: Product Definition & Classification: Do You Really Know "Anti-Corrosion Woven Sheets"?
An Anti-Corrosion Woven Sheet is a specialized industrial material designed to protect surfaces or structures from chemical degradation, rust, and environmental wear. In international trade, its classification is tricky because it depends on what it is made of (material composition) and how it is structured (form factor).
In the USA market (subject to specific trade policies), these sheets generally fall into two main categories: 1. Technical Textiles (Textile-based): If the core material is textile/fabric treated with anti-corrosion coatings or impregnation. 2. Plastics/Polymers (Plastic-based): If the material is synthetic fibers, plastic mesh, or composite sheets.
β οΈ Key Distinction Point:
- If the primary characteristic is textile weaving (even with coatings) β Look at Chapter 59.
- If the primary characteristic is plastic/synthetic sheeting (mesh or film) β Look at Chapter 39.
π¦ Part 2: HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Material Basis |
|---|---|---|---|
5911.90.00.40 |
Anti-Corrosion Woven Sheets (Textile Form) | Technical textiles, woven sheets for industrial filtration or protection | Textile/Composite Material |
3926.90.59.00 |
Anti-Corrosion Woven Sheets (Plastic-Based) | Plastic sheeting inferred from woven form; general plastic articles | Plastic/Textile Fiber Hybrid |
3926.90.57.00 |
Anti-Corrosion Woven Sheets (Synthetic/Plastic) | Synthetic fibers or plastic strips; sheet/strip form | Plastic/Synthetic Fiber |
5911.90.00.80 |
Anti-Corrosion Woven Sheets (Technical Textiles) | Technical textiles for specific industrial use; synthetic fibers or metal wire blends | Synthetic Fiber/Metal Wire |
5903.10.20.10 |
Anti-Corrosion Woven Sheets (Impregnated Textiles) | Textile fabric impregnated or coated with plastics for anti-corrosion | Textile + Plastic Impregnation |
π Critical Reminder:
- Chapter 59 is for Textiles that have been impregnated, coated, covered, or laminated. If your product is a woven fabric with a functional coating, this is often the most accurate category.
- Chapter 39 is for Articles of Plastic. If the product is primarily a plastic mesh or sheet, even if woven, it may fall here.
- Misclassification Risk: Declaring a plastic mesh as a textile (or vice versa) can lead to severe penalties and duty underpayments/overpayments.
π° Part 3: 2026 Latest Tariff Rate Breakdown (Including Additional Duties & Policy Surcharges)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Date: Current trade policies (2025-2026) apply
π― 1. 5911.90.00.40 β Anti-Corrosion Woven Sheet (Textile Form)
| Item | Content |
|---|---|
| Base Duty Rate | 3.8% (ad valorem) |
| Section 301 Additional Duty | +25.0% (Specific to Chinese imports) |
| Section 122/Other Policy Surcharge | +10.0% (Applicable surcharge for specific Chinese goods) |
| Total Duty Rate | 38.8% |
| Duty Calculation | CIF Value Γ 38.8% |
| De Minimis Exemption? | β No (Not eligible for Section 321 de minimis waiver) |
| Legal Basis Path | USITC:5911.90.00.40 β Section 301: 25% β Policy Surcharge: 10% |
π Explanation:
- The 3.8% base duty reflects the standard tariff for technical textiles.
- The 25% Section 301 tariff is the primary additional duty for Chinese goods in this category.
- The 10% surcharge is an additional layer for specific Chinese-origin goods under current trade restrictions.
- Total 38.8% is a significant cost driver. Pre-calculation is essential.
π― 2. 3926.90.59.00 β Anti-Corrosion Woven Sheet (Plastic-Based)
| Item | Content |
|---|---|
| Base Duty Rate | 2.4% (ad valorem) |
| Section 301 Additional Duty | +25.0% |
| Section 122/Other Policy Surcharge | +10.0% |
| Total Duty Rate | 37.4% |
| Duty Calculation | CIF Value Γ 37.4% |
| De Minimis Exemption? | β No |
| Legal Basis Path | USITC:3926.90.59.00 β Section 301: 25% β Policy Surcharge: 10% |
π Note:
- Slightly lower than textile variants due to a lower base rate (2.4% vs 3.8%).
- Still subject to the full 25% + 10% surcharges.
π― 3. 3926.90.57.00 β Anti-Corrosion Woven Sheet (Synthetic/Plastic)
| Item | Content |
|---|---|
| Base Duty Rate | 6.5% (ad valorem) |
| Section 301 Additional Duty | +25.0% |
| Section 122/Other Policy Surcharge | +10.0% |
| Total Duty Rate | 41.5% |
| Duty Calculation | CIF Value Γ 41.5% |
| De Minimis Exemption? | β No |
| Legal Basis Path | USITC:3926.90.57.00 β Section 301: 25% β Policy Surcharge: 10% |
π Warning:
- This has the highest total rate (41.5%) among the plastic categories due to a higher base duty (6.5%).
- Ensure the product description clearly distinguishes this from3926.90.59.00to avoid overpaying if it fits the lower category.
π― 4. 5911.90.00.80 β Anti-Corrosion Woven Sheet (Technical Textiles)
| Item | Content |
|---|---|
| Base Duty Rate | 3.8% (ad valorem) |
| Section 301 Additional Duty | +25.0% |
| Section 122/Other Policy Surcharge | +10.0% |
| Total Duty Rate | 38.8% |
| Duty Calculation | CIF Value Γ 38.8% |
| De Minimis Exemption? | β No |
| Legal Basis Path | USITC:5911.90.00.80 β Section 301: 25% β Policy Surcharge: 10% |
π Note:
- Similar to5911.90.00.40, this is a general technical textile category.
- Use this if the product is made of synthetic fibers or metal wires and does not fit the specific "woven sheet" sub-category of.40.
π― 5. 5903.10.20.10 β Anti-Corrosion Woven Sheet (Impregnated Textiles)
| Item | Content |
|---|---|
| Base Duty Rate | 0.0% (ad valorem) |
| Section 301 Additional Duty | +25.0% |
| Section 122/Other Policy Surcharge | +10.0% |
| Total Duty Rate | 35.0% |
| Duty Calculation | CIF Value Γ 35.0% |
| De Minimis Exemption? | β No |
| Legal Basis Path | USITC:5903.10.20.10 β Section 301: 25% β Policy Surcharge: 10% |
π Advantage:
- This category has the lowest total rate (35.0%) because the base duty is 0%.
- Crucial Condition: The product must be a textile fabric that has been impregnated, coated, covered, or laminated with plastic. If your "woven sheet" is essentially a fabric treated with a corrosion-resistant chemical/plastic layer, this is the most cost-effective classification.
- Verification Required: Must prove the textile nature is primary and the coating is secondary.
π οΈ Part 4: Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
β 1. Required Documentation Checklist (Non-Negotiable)
| Document | Mandatory? | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must detail material composition (e.g., "Polypropylene woven fabric, PVC coated") |
| β Material Composition Statement | βοΈ | Clearly state % of textile vs. plastic/coating |
| β Product Photos (Clear) | βοΈ | Show weave structure, coating texture, and any labels |
| β Third-Party Test Report | βοΈ | Proof of anti-corrosion properties (if claimed) and material analysis |
| β Commercial Invoice | βοΈ | Must use accurate HS Code and descriptive name (e.g., "Impregnated Textile Sheet") |
| β Packing List | βοΈ | Detail weight, dimensions, and packaging type |
| β Country of Origin Certificate | βοΈ | Critical for determining additional duties |
β 2. Declaration Strategy (Key Mantras)
π₯ "Material Defines Code, Coating Defines Chapter, Name Defines Truth!"
| Scenario | Correct Declaration | Wrong Action |
|---|---|---|
| Fabric + Plastic Coating | 5903.10.20.10 (Textile Impregnated) |
Declare as "Plastic Sheet" β Higher Base Duty |
| Pure Plastic Mesh | 3926.90.57.00 or 3926.90.59.00 |
Declare as "Textile" β Risk of Rejection |
| Woven Fabric + Anti-Rust Chemical | 5911.90.00.40 |
Declare as "General Plastic" β Incorrect Chapter |
| Mixed Fiber (Synthetic + Metal) | 5911.90.00.80 |
Declare as "Pure Plastic" β Mismatch |
β 3. Special Circumstances Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Sheets | Provide client design specs + material composition proof to avoid "General Use" high duties |
| Samples vs. Commercial | Both are subject to the same duties. Do not declare as "Gift" if commercial intent exists |
| Composite Materials | If >50% by value/weight is textile, Chapter 59 is preferred; otherwise, Chapter 39 |
| Metal Wire Weaves | If metal wire is the primary structure, it may fall under Chapter 73 or 74, not Chapter 59. Verify! |
π Part 5: Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Duty Rate (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 5903.10.20.10 (Best Rate) |
35.0% (Lowest of all) | None specific, but accurate description key | High Surcharges apply to all |
| πΊπΈ USA | 3926.90.57.00 |
41.5% (Highest) | None | Avoid if possible |
| π¨π³ China | 5903.10.20.10 |
0% (MFN) | CCC (if applicable) | No additional surcharges |
| πͺπΊ EU | 5903.10.20.10 |
0-2.5% (varies) | REACH + RoHS | No Section 301 equivalent |
| π¦πΊ Australia | 5903.10.20.10 |
5% | RCM | Moderate duties |
π Conclusion:
- The USA market is the most challenging due to the 25% + 10% surcharges.
- Choosing the right HS Code is critical.5903.10.20.10offers the lowest total rate (35.0%) but requires strict proof of being an impregnated textile.
- Misclassification is risky. If you declare a plastic sheet as an impregnated textile, Customs may audit and penalize you.
π Part 6: Common Mistakes & Pitfall Guide (Blood & Tears Lessons)
β Mistake 1: Declaring all woven anti-corrosion sheets as "Plastic Sheets" (3926)
π Result: You might pay 41.5% instead of 35.0% if it was actually an impregnated textile. Overpayment!
β Mistake 2: Declaring a pure plastic mesh as "Textile" (5911)
π Result: Customs may reject the entry for inaccurate material description, causing delays and storage fees. Delay!
β Mistake 3: Ignoring the "122 Clause/Policy Surcharge"
π Result: Underestimating landed cost by 10%. Profit Erosion!
β Mistake 4: Using vague names like "Anti-Corrosion Sheet" on Invoice
π Result: Customs officers may assign a generic, higher-duty code. Uncertainty!
β Correct Practice:
"Impregnated Textile Sheet, Polypropylene Weave, PVC Coated for Anti-Corrosion, Model XYZ, Certified"
π― Part 7: Conclusion: Professional Declaration, Save Money, Clear Quickly!
π― Remember the Mantra:
πΉ "Textile + Coating = 5903 (Lowest Duty)"
πΉ "Pure Plastic Mesh = 3926 (Higher Duty)"
πΉ "Always Add 25% + 10% for China Origin to USA"
πΉ "Accuracy Saves Thousands, Vagueness Costs Everything!"
π Pro Tip:
If your product can be legally classified as 5903.10.20.10 (Impregnated Textile), fight for it with proper documentation (material analysis reports). The 3.8% base duty difference translates to significant savings on high-value shipments.
Suggest applying for a Binding Tariff Information (BTI) or Advance Ruling if possible, to lock in the classification.
π£ Action Now:
π Contact a Licensed Customs Broker + Provide Material Spec Sheet + Request HS Code Pre-Ruling
π Ensure your Anti-Corrosion Woven Sheets Clear Customs Smoothly, Avoid Penalties, and Maximize Profit Margins!
β¨ Professional Customs Clearance Starts with Precise Classification!
πΌ Every Percent of Duty Counts. Don't Guess, Verify!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.