Architectural drawing paper
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4811592000 | 10.0% | CN | US | Official Doc |
| 4811904090 | 35.0% | CN | US | Official Doc |
| 4802562000 | 10.0% | CN | US | Official Doc |
| 4802572000 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
π Architectural Drawing Paper (Drawing Paper for Graphic Purposes)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Clearance Strategy
π 1. Product Definition & Classification: What exactly is "Architectural Drawing Paper"?
Architectural drawing paper is a specialized uncoated paperboard used for writing, printing, or other graphic purposes. In international trade, it is strictly classified under Chapter 48 (Paper and Paperboard). The key distinction lies in the weight (GSM), dimensions, and manufacturing process.
Key Characteristics: * Uncoated: Not coated, impregnated, covered, or surface-decorated. * Fiber Content: Must not contain fibers obtained by a mechanical or chemi-mechanical process, or such fibers must constitute β€ 10% by weight of the total fiber content. * Weight Range: Typically weighs between 40 g/mΒ² and 150 g/mΒ². * Sheet Size: Rectangular sheets (including square), with specific dimensional thresholds for sub-classification.
β οΈ Critical Distinction Point:
- If the paper is coated/printed β It falls under Heading 4811.
- If the paper is uncoated and meets specific size/weight criteria β It falls under Heading 4802.
- Hand-made paper is excluded from these specific subheadings.
π¦ 2. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
Based on the provided data, there are 4 specific HS Codes for paper products. However, only 2 apply to "Uncoated Architectural Drawing Paper" (Heading 4802). The other two apply to "Coated/Printed Paper" (Heading 4811). We will analyze all relevant codes from the input data, highlighting why the correct one applies to architectural drawing.
| HS Code | Product Description | Applicable Scenario | Uncoated/Coated? |
|---|---|---|---|
4802.56.20.00 |
Uncoated paper, drawing paper, weighing 40β150 g/mΒ², sheets with one side >360mm and other >150mm | Standard Architectural Drafting Paper (Large sheets) | β Uncoated |
4802.57.20.00 |
Uncoated paper, drawing paper, weighing 40β150 g/mΒ², other sizes (not meeting 4802.56 criteria) | Smaller/Standard Drawing Paper | β Uncoated |
4811.59.20.00 |
Coated/Impregnated paper, printing paper, strips/rolls >15cm or sheets >36cm x 15cm | Coated drafting paper, printed plots, laminated drawings | β Coated/Printed |
4811.90.40.90 |
Coated/Other paper, weighing β€15 g/mΒ², other products | Ultra-thin coated papers, non-drawing applications | β Coated/Other |
π Key Insight for Architectural Paper:
-4802.56.20.00and4802.57.20.00are the correct codes for Uncoated architectural drawing paper.
-4811.59.20.00is incorrect for uncoated paper but may apply if the paper is coated (e.g., matte finish, plastic-impregnated) and used for printing.
-4811.90.40.90applies to very thin paper (β€15 g/mΒ²), which is not typical for architectural drawing paper (usually β₯40 g/mΒ²).
π° 3. 2026 Latest Tariff Rate Breakdown (Including Additional Duties)
β Applicable Country: USA (US)
β Origin: China (CN)
β Effective Date: 2025-11-10 onwards
π― 1. 4802.56.20.00 ββ Uncoated Drawing Paper (Large Sheets)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Duty | 0.0% |
| Total Tariff Rate | 0.0% |
| Tax Calculation | CIF Value Γ 0.0% = $0 |
| De Minimis Eligibility | N/A (Full duty exemption) |
| Legal Basis | HTSUS 4802.56.20.00; USITC Footnote for China |
π Explanation:
- This code benefits from 0% total tariff.
- No Section 301 or IEEPA surcharges apply to this specific uncoated drawing paper subtype.
- Highly competitive for importers.
π― 2. 4802.57.20.00 ββ Uncoated Drawing Paper (Other Sizes)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Duty | 25.0% |
| IEEPA Additional Duty | 0.0% (Not listed in data for this code) |
| Total Tariff Rate | 25.0% |
| Tax Calculation | CIF Value Γ 25.0% |
| De Minimis Eligibility | β Not Eligible (deny_de_minimis likely applies for >$800 if subject to 301) |
| Legal Basis | HTSUS 4802.57.20.00; USITC Footnote 9903.88.01 (if applicable) |
π Explanation:
- Despite being uncoated, this subtype incurs a 25% surcharge due to trade policy measures.
- Critical Risk: If you misclassify4802.57.20.00instead of4802.56.20.00, you pay an extra 25%.
- Dimensional precision is key to avoiding this higher rate.
π― 3. 4811.59.20.00 ββ Coated/Impregnated Printing Paper
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Duty | 25.0% |
| IEEPA Additional Duty | 0.0% |
| Total Tariff Rate | 25.0% |
| Tax Calculation | CIF Value Γ 25.0% |
| De Minimis Eligibility | β Not Eligible |
| Legal Basis | HTSUS 4811.59.20.00 |
π Explanation:
- If your "architectural paper" is coated (e.g., matte, glossy, plastic-impregnated) and used for printing, it may fall here.
- Do not use this for uncoated paper. Misclassification can lead to penalties.
π― 4. 4811.90.40.90 ββ Other Coated Paper (β€15 g/mΒ²)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Duty | 25.0% |
| IEEPA Additional Duty | 0.0% |
| Total Tariff Rate | 25.0% |
| Tax Calculation | CIF Value Γ 25.0% |
| De Minimis Eligibility | β Not Eligible |
| Legal Basis | HTSUS 4811.90.40.90 |
π Explanation:
- Applies to very thin paper (β€15 g/mΒ²).
- Not suitable for standard architectural drawing paper (which is β₯40 g/mΒ²).
- Use only for specialty lightweight coated papers.
π οΈ 4. Customs Clearance Practical Advice (Avoiding Pitfalls)
β 1. Documentation Checklist (Essential)
| Document | Required? | Notes |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must state: Uncoated, Weight (g/mΒ²), Fiber Content (β€10% mechanical), Dimensions. |
| β Commercial Invoice | βοΈ | Clearly describe as "Uncoated Architectural Drawing Paper, Heading 4802." |
| β Packing List | βοΈ | Detail sheet sizes and quantities. |
| β Certificate of Origin | βοΈ | For potential FTZ/FTA benefits (if applicable). |
| β Third-Party Test Report | βοΈ | Confirm fiber content and weight to avoid misclassification. |
β 2. Declaration Tips (Key Mantra)
π₯ "Uncoated 4802, Coated 4811, Size Matters, Tax Rate Varies!"
| Scenario | Correct HS Code | Incorrect HS Code | Consequence |
|---|---|---|---|
| Uncoated, >360mm x 150mm, 40-150 g/mΒ² | 4802.56.20.00 (0%) |
4802.57.20.00 |
Pay extra 25% |
| Uncoated, <360mm or <150mm, 40-150 g/mΒ² | 4802.57.20.00 (25%) |
4802.56.20.00 |
Risk of penalty for wrong size |
| Coated/Printed, >36cm x 15cm | 4811.59.20.00 (25%) |
4802.56.20.00 |
Severe Penalty for misclassification |
| Thin Coated Paper (β€15 g/mΒ²) | 4811.90.40.90 (25%) |
4802.57.20.00 |
Wrong weight range, incorrect code |
β 3. Special Cases
| Situation | Advice |
|---|---|
| Mixed Shipment | Separate uncoated (4802) and coated (4811) papers on different lines. |
| Sample vs. Commercial | Ensure commercial shipments match the declared specs. |
| Hand-made Paper | Excluded from these codes; use Heading 4802.31.00.00 or similar. |
π 5. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Notes |
|---|---|---|---|
| πΊπΈ USA | 4802.56.20.00 |
0% | Best for large uncoated sheets |
| πΊπΈ USA | 4802.57.20.00 |
25% | Smaller uncoated sheets |
| π¨π³ China | 4802.56.20.00 |
5% | No additional duties |
| πͺπΊ EU | 4802.56.20.00 |
0% (if FTA) | CE marking not required for paper |
| π¬π§ UK | 4802.56.20.00 |
0% | Post-Brexit tariffs |
π Conclusion:
- USA offers 0% duty for large uncoated drawing paper (4802.56.20.00).
- Small uncoated sheets or coated papers incur 25%.
- Precision in dimensions and coating status is critical to saving 25%.
π 6. Common Errors & Pitfalls
β Error 1: Classifying coated paper as uncoated
π Consequence: Wrong HS Code (4802 vs 4811), potential penalties.
β Error 2: Ignoring sheet dimensions for 4802.56 vs 4802.57
π Consequence: Paying 25% extra duty by using 4802.57.20.00 when 4802.56.20.00 applies.
β Error 3: Assuming all drawing paper is β₯40 g/mΒ²
π Consequence: If β€15 g/mΒ² and coated, it falls under 4811.90.40.90 (25%).
β Correct Practice:
"Uncoated Architectural Drawing Paper, 90 g/mΒ², Sheets 914mm x 610mm, Heading 4802"
π― 7. Conclusion: Professional Classification Saves Money!
π― Key Takeaways:
πΉ "Uncoated + Large Size = 0% Duty (
4802.56.20.00)"
πΉ "Uncoated + Small Size = 25% Duty (4802.57.20.00)"
πΉ "Coated Paper = 25% Duty (4811.59.20.00)"
πΉ "Thin Coated (β€15 g/mΒ²) = 25% Duty (4811.90.40.90)"
π Pro Tip:
Always verify sheet dimensions and coating status before declaring. A simple measurement error can cost 25% of your cargo value.
π£ Immediate Action:
π Contact your customs broker with exact sheet sizes and fiber content details.
π Apply for an Advance Ruling if you have a mixed product line.
πΌ Precision in classification = Savings in tariffs!
β¨ Professional customs clearance starts with accurate HS Code selection!
πΌ Every percentage point counts in global trade!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.