Baking Tools
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8210000000 | 38.7% | CN | US | Official Doc |
| 3924103000 | 22.8% | CN | US | Official Doc |
| 6911108010 | 38.3% | CN | US | Official Doc |
| 6911108090 | 38.3% | CN | US | Official Doc |
| 3924104000 | 13.4% | CN | US | Official Doc |
Product Images
AI Analysis
π° Baking Tools: Complete HS Code Classification & 2026 Tax Strategy Guide
π Global Trade Compliance | 2026 Tariff Breakdown | Professional Customs Clearance Protocol
π One: Product Definition: What Exactly are "Baking Tools"?
Baking tools are essential equipment used in the food preparation and conditioning sector. They range from simple manual mechanical devices (like whisks and spatulas) to complex ceramic molds and plastic mixing bowls.
In international trade, these items are not a single category. They are split based on material (Plastic vs. Ceramic) and function (Manual Mechanical vs. General Utensils). Misclassification leads to severe tariff penalties (up to 38.7%).
β οΈ Key Distinction:
- Manual Mechanical Devices (metal/wood whisks, mixers) β HS 8210.00.00.00
- Plastic Kitchenware (mixing bowls, spatulas) β HS 3924.10.30.00 / 3924.10.40.00
- Ceramic/Porcelain Utensils (molds, baking sheets, plates) β HS 6911.10.80.10 / 6911.10.80.90
π¦ Two: HS Code Classification Matrix (2026 Latest Tariff Schedule)
| HS Code | Product Description | Material/Type | Matching Logic (from Data) |
|---|---|---|---|
| 8210.00.00.00 | Manual Mechanical Devices | Metal, Wood, or General Mechanical | "Matching Use": Food preparation/conditioning; "Matching Form": Manual mechanical appliance. |
| 3924.10.30.00 | Plastic Kitchenware (General) | Plastic | "Matching Use": Kitchenware; No obvious material/form conflict (Inferred). |
| 3924.10.40.00 | Plastic Kitchenware (Specific) | Plastic | "Matching Use": Cookware/Kitchenware; Fallback category for plastic cutlery/kitchenware. |
| 6911.10.80.10 | Ceramic Kitchen Utensils | Porcelain/Ceramic | "Matching Use": Kitchen utensils/dishware; Material suitable for food contact. |
| 6911.10.80.90 | Ceramic/Baking Tools | Porcelain/Ceramic | "Matching Use": Cookware/Baking tools; Matches dishware category. |
π Critical Note:
- Plastic items can fall into 3924.10.30.00 or 3924.10.40.00 depending on specific design.
- Ceramic items (molds, trays) are strictly under 6911.10.80.10 or 6911.10.80.90.
- Metal/Manual tools (whisks, dough cutters) belong to 8210.00.00.00.
π° Three: 2026 Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
β Target Market: United States (US)
β Origin: China (CN)
β Applicable Time: Current 2026 Regulations
π― 1. Manual Mechanical Tools (HS 8210.00.00.00)
For: Whisks, dough beaters, manual mixers, metal spatulas.
| Item | Details |
|---|---|
| Base Tariff | 3.7% |
| Section 301 (Add-on) | 25.0% |
| Section 122 (Add-on) | 10.0% |
| Total Tariff Rate | 38.7% |
| Calculation | CIF Value Γ 38.7% |
| De Minimis Exemption | β NO (High duty triggers strict scrutiny) |
π Explanation:
- The 25% is the Section 301 tariff on Chinese mechanical goods.
- The 10% is the "Section 122" tariff (often related to reciprocal or specific trade measures).
- Total 38.7% makes metal manual tools very expensive for US importers.
π― 2. Plastic Kitchenware (HS 3924.10.30.00)
For: Plastic mixing bowls, generic plastic utensils.
| Item | Details |
|---|---|
| Base Tariff | 5.3% |
| Section 301 (Add-on) | 7.5% |
| Section 122 (Add-on) | 10.0% |
| Total Tariff Rate | 22.8% |
| Calculation | CIF Value Γ 22.8% |
| De Minimis Exemption | β NO |
π Explanation:
- Plastic kitchenware faces a 7.5% Section 301 add-on, lower than mechanical tools.
- Still combined with the 10% Section 122 tariff.
π― 3. Plastic Kitchenware (HS 3924.10.40.00)
For: Specific plastic cookware (fallback category).
| Item | Details |
|---|---|
| Base Tariff | 3.4% |
| Section 301 (Add-on) | 0.0% |
| Section 122 (Add-on) | 10.0% |
| Total Tariff Rate | 13.4% |
| Calculation | CIF Value Γ 13.4% |
| De Minimis Exemption | β NO |
π Explanation:
- Best Case for Plastic! If the item qualifies for 3924.10.40.00, the Section 301 tariff is 0%.
- Only 10% Section 122 applies. Crucial for cost optimization.
π― 4 & 5. Ceramic/Porcelain Tools (HS 6911.10.80.10 / .90)
For: Ceramic baking molds, porcelain pastry tools, ceramic serving plates for baking.
| Item | Details |
|---|---|
| Base Tariff | 20.8% |
| Section 301 (Add-on) | 7.5% |
| Section 122 (Add-on) | 10.0% |
| Total Tariff Rate | 38.3% |
| Calculation | CIF Value Γ 38.3% |
| De Minimis Exemption | β NO |
π Explanation:
- Ceramic items have a high base tariff (20.8%).
- Combined with 7.5% and 10% add-ons, the total is 38.3%.
- Strategy: Do not use ceramic for bulk low-value items unless the margin is high.
π οΈ Four: Customs Clearance Practical Advice (Avoid Pitfalls)
β 1. Documentation Checklist (Must-Have)
| Document | Requirement | Why It Matters |
|---|---|---|
| Product Specification Sheet | βοΈ Mandatory | Must explicitly state "Manual Mechanical" (for 8210) or "Plastic/Ceramic" (for 39/69). |
| Material Composition Cert | βοΈ Mandatory | Proves if it's Plastic, Ceramic, or Metal. Critical for distinguishing HS codes. |
| Photos of Product | βοΈ Mandatory | Must show "No electric motor" (for 8210) vs "Electric" (wrong code). |
| Commercial Invoice | βοΈ Mandatory | Description must match HS code logic (e.g., "Plastic Mixing Bowl" vs "Metal Whisk"). |
| Bill of Lading (B/L) | βοΈ Mandatory | Ensure weight/volume matches declared value for audit. |
β 2. Declaration Strategy (The "Golden Rules")
π₯ Mantra: "Material First, Function Second. Plastic = 13.4%? Check 3924.10.40.00!"
| Scenario | Correct Declaration | Risk if Wrong |
|---|---|---|
| Metal Whisk | 8210.00.00.00 |
If declared as "Kitchenware" β Potential audit/penalty. |
| Plastic Bowl | 3924.10.40.00 (Best) |
If declared as 3924.10.30.00 β Extra 9.4% tax paid! |
| Ceramic Mold | 6911.10.80.90 |
If declared as 8210 (Metal) β Huge Error, Customs delays. |
| Mixed Set | Split Declaration | If declared as one "Kitchen Set" β High Risk of re-classification to highest tax. |
β 3. Special Handling Scenarios
| Situation | Recommendation |
|---|---|
| "Baking Set" (Plastic + Metal) | DO NOT declare as one HS code. Split the invoice into "Plastic Items" and "Metal Items". |
| Silicone Tools | Often treated as Plastic (3924.10). Verify if silicone is classified separately (usually under 39 or 40). |
| Ceramic vs. Porcelain | Ensure the material spec says "Porcelain" for 6911. "Stoneware" might differ. |
π Five: Market Comparison & Cost Efficiency
| Market | Recommended HS Code | Total Tax Rate (China Origin) | Strategy |
|---|---|---|---|
| πΊπΈ USA | 3924.10.40.00 |
13.4% (Lowest) | Priority: Optimize plastic items to 40.00 subheading. |
| πΊπΈ USA | 8210.00.00.00 |
38.7% (High) | Avoid high-value metal tools if possible. |
| πΊπΈ USA | 6911.10.80.90 |
38.3% (High) | Use only for high-margin ceramic goods. |
π Conclusion:
- Plastic items in category 3924.10.40.00 are the most cost-effective (13.4%).
- Metal and Ceramic items are heavily taxed (~38%).
- Never lump all baking tools into one HS code.
π Six: Common Mistakes & "Red Flags"
β Mistake 1: Calling a "Metal Whisk" a "Kitchen Utensil" (Generic)
π Result: Customs may force it into a higher tax category or demand detailed mechanical specs.
β Mistake 2: Claiming "Plastic" for a "Silicone" item without data
π Result: Silicone is often treated differently; misclassification leads to 20%+ tax difference.
β Mistake 3: Combining Ceramic and Metal in one line item
π Result: Customs splits the invoice at the dock, delays shipment, and charges storage fees.
β Correct Action:
"Separate lines for Plastic (3924.10.40.00), Metal (8210.00.00.00), and Ceramic (6911.10.80.90) with clear Material Certificates."
π― Seven: Final Verdict & Action Plan
π― Remember the Rules:
πΉ "Plastic Check: Aim for 40.00 (13.4%)!"
πΉ "Metal is 38.7%, Ceramic is 38.3% β High Tax!"
πΉ "Split Mixed Sets to Avoid Delays!"
π Pro Tip:
If you are importing baking tools, prioritize plastic items declared under 3924.10.40.00 for the lowest tariff. For metal tools, ensure the description strictly matches "Manual Mechanical" to avoid being misclassified as "Electric" (which has even higher taxes).
π£ Immediate Action Required:
π Contact your customs broker and request a Pre-Production Review of your Baking Tools line.
π Optimize your HS codes today to save ~25% in taxes on plastic items!
β¨ Professional Classification, Efficient Clearance, Maximum Profit!
πΌ Your Cost Structure Starts with the Right HS Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.